ich777 Posted February 18, 2023 Share Posted February 18, 2023 12 minutes ago, xorinzor said: I purchased the Arc A380 with sole intention as a dedicated card for Plex, so this will work perfectly. But keep in mind this is only h264 and h265, for AV1 transcoding you have to wait a bit longer since the Linux implementation is not ready yet (Intel Media Driver package, FFMPEG and all other applications are not quiet ready yet). 17 minutes ago, xorinzor said: Does your card's temps also get significantly lower at that kernel version? I have a Asrock Intel Arc A380 Challenger ITX 6GB OC and this card is getting pretty hot OOB, of course one thing is that it has a zero fan RPM mode and by default it's in that mode but at least while transcoding the fan turns on but it won't get noticeable cooler since the fan curve is not that aggressive in my opinion. Quote Link to comment
xorinzor Posted February 18, 2023 Share Posted February 18, 2023 6 minutes ago, ich777 said: But keep in mind this is only h264 and h265, for AV1 transcoding you have to wait a bit longer since the Linux implementation is not ready yet (Intel Media Driver package, FFMPEG and all other applications are not quiet ready yet). Ah okay, good to know. Still a perfect card for me though. I had my RTX2070 before this shared with multiple docker containers, including plex. But wanted to move that to a dedicated VM, thus needed a new GPU for transcoding. 14 minutes ago, ich777 said: I have a Asrock Intel Arc A380 Challenger ITX 6GB OC and this card is getting pretty hot OOB I have that exact same card, brand new, same behaviour. I guess it's just normal for this card then. Hopefully they'll improve that in future updates. My RTX2070 fans dont spin either, but it doesn't get anywhere near as warm in idle as the A380 Quote Link to comment
ich777 Posted February 18, 2023 Share Posted February 18, 2023 6 minutes ago, xorinzor said: but it doesn't get anywhere near as warm in idle as the A380 But don't forget that the cooler is much smaller on the A380, I even thought about removing the shroud and attaching a 120mm fan to it which is connected to the MB and let it run at 50% or something like that, not the nicest solution but it will work, keep the card cool and this wouldn't be the first time that I'll do some mods like that. Quote Link to comment
jsrk Posted February 19, 2023 Author Share Posted February 19, 2023 On 2/18/2023 at 12:46 PM, xorinzor said: Ah okay, good to know. Still a perfect card for me though. I had my RTX2070 before this shared with multiple docker containers, including plex. But wanted to move that to a dedicated VM, thus needed a new GPU for transcoding. I have that exact same card, brand new, same behaviour. I guess it's just normal for this card then. Hopefully they'll improve that in future updates. My RTX2070 fans dont spin either, but it doesn't get anywhere near as warm in idle as the A380 me too, save behavior. In regards to the earlier question, I am uncertain how an update will work out for me, but my estimation is that I can just download a new unraid on my windows pc and replace all the files on the usb stick if something fails. I have a pretty simple setup so I am confident that this will work for me. I don't know what your setup is, but my understanding is that official support is around the corner so it's probably better to wait. Having said that, I think you made an excellent choice with having gotten an A380 and you will probably be very happy with the results. Quote Link to comment
jsrk Posted February 19, 2023 Author Share Posted February 19, 2023 On 2/18/2023 at 12:55 PM, ich777 said: But don't forget that the cooler is much smaller on the A380, I even thought about removing the shroud and attaching a 120mm fan to it which is connected to the MB and let it run at 50% or something like that, not the nicest solution but it will work, keep the card cool and this wouldn't be the first time that I'll do some mods like that. I think the cooling block is too small for that, you would also have the remove the fan from the card or else it could block the airflow too much. Quote Link to comment
xorinzor Posted February 19, 2023 Share Posted February 19, 2023 2 minutes ago, jsrk said: I don't know what your setup is I'm using a pretty beefy server that runs pretty much everything; Webservers, Plex, Windows VM, Pihole, Unifi controller, etc. so reinstalling and reconfiguring all the vlans, docker networks, etc would be quite a bit of a hassle for me 😅 I do make backups, but I'm unsure how much backups will help me if the unraid packages get messed up. Since my CPU (ryzen 5900X) is powerful enough to transcode (if needed) I have no issue with just waiting for an official release Quote Link to comment
jsrk Posted February 19, 2023 Author Share Posted February 19, 2023 2 minutes ago, xorinzor said: I'm using a pretty beefy server that runs pretty much everything; Webservers, Plex, Windows VM, Pihole, Unifi controller, etc. so reinstalling and reconfiguring all the vlans, docker networks, etc would be quite a bit of a hassle for me 😅 I do make backups, but I'm unsure how much backups will help me if the unraid packages get messed up. Since my CPU (ryzen 5900X) is powerful enough to transcode (if needed) I have no issue with just waiting for an official release In that case I think you are definitly making the right choice in waiting. Plex currently also doesn't support the ARC card (at least it didn't 2 weeks ago), only jellyfin does. Quote Link to comment
jsrk Posted February 19, 2023 Author Share Posted February 19, 2023 On 2/17/2023 at 9:39 PM, Clockwork Elf said: When stable unraid reaches kernel 6.2 will you have to do anything or just update as regular (possibly skip previous updates before 6.2)? I am in the same boat currently( arc380/trying to encode most of my media in AV1 and decode if necessary on clients that don't support it), using Jellyfin as well and wondering if I should try your approach. The other option I've seen is running a VM with the necessary kernel but I've seen multiple people having issue with passing through the arc380. Have you had any additional problems since this post or is everything still fine? In regards to the updates: Probably not. What you should know though is that AV1 encode doesn't work yet. Passing the kernel through to an additional vm works but it has given me so many additional problems that I decided to not do that. I have zero issues currently (with custom kernel) but I only use jellyfin. Emby and Plex don't support the arc yet. Quote Link to comment
ich777 Posted February 19, 2023 Share Posted February 19, 2023 1 hour ago, jsrk said: I can just download a new unraid on my windows pc and replace all the files on the usb stick if something fails. You have to only replace the bz* files and the changes.txt file if you want to upgrade… 1 hour ago, jsrk said: I think the cooling block is too small for that, you would also have the remove the fan from the card or else it could block the airflow too much. Exactly, but since I‘m only testing whats currently possible with ARC I don‘t have to do this currently. 57 minutes ago, jsrk said: only jellyfin does. 49 minutes ago, jsrk said: Emby and Plex don't support the arc yet. This is also not entirely true… have you compiled the Kernel yourself? Maybe something went wrong there since I have no issue usig the card with Emby. I‘m not too sure about Plex because I don‘t know if they are using QuickSync (which is not ready yet for ARC) but if they are using the VA-API it should be no issue at all but I can also imagine if you have a second card installed which actually uses /dev/dri/renderD128 and your ARC card is /dev/dri/renderD129 in the system this will cause issues and you need to map it from the host to the container with something like that in the template: --device=/dev/dri/renderD129:/dev/dri/renderD128 And you also have to map the card from 1 to 0 like: --device=/dev/dri/card1:/dev/dri/card0 This should work for Plex too if they are using VA-API instead of QuickSync. Quote Link to comment
jsrk Posted February 19, 2023 Author Share Posted February 19, 2023 1 hour ago, ich777 said: You have to only replace the bz* files and the changes.txt file if you want to upgrade… Exactly, but since I‘m only testing whats currently possible with ARC I don‘t have to do this currently. This is also not entirely true… have you compiled the Kernel yourself? Maybe something went wrong there since I have no issue usig the card with Emby. I‘m not too sure about Plex because I don‘t know if they are using QuickSync (which is not ready yet for ARC) but if they are using the VA-API it should be no issue at all but I can also imagine if you have a second card installed which actually uses /dev/dri/renderD128 and your ARC card is /dev/dri/renderD129 in the system this will cause issues and you need to map it from the host to the container with something like that in the template: --device=/dev/dri/renderD129:/dev/dri/renderD128 And you also have to map the card from 1 to 0 like: --device=/dev/dri/card1:/dev/dri/card0 This should work for Plex too if they are using VA-API instead of QuickSync. I moved completely to jellyfin but when I still had emby it would only show the vp9 and h264 decoder and nothing else. Yes I compiled the Kernel myself, if it works for you and not for me, then I probably messed something up. I can use quicksync on jellyfin just fine, even though it's not completely ready yet. I disabled my igpu in the bios but I am sure the info you provided will come in handy for other people. Quote Link to comment
Clockwork Elf Posted February 20, 2023 Share Posted February 20, 2023 kernel 6.2 was just released, does that mean that the next unraid version will include it or it is unkknown? Quote Link to comment
nyanmisaka Posted February 22, 2023 Share Posted February 22, 2023 On 2/21/2023 at 7:59 AM, Clockwork Elf said: kernel 6.2 was just released, does that mean that the next unraid version will include it or it is unkknown? I think since 6.1 is the new LTS, they'll upgrade to it first. 1 Quote Link to comment
nyanmisaka Posted February 22, 2023 Share Posted February 22, 2023 On 2/19/2023 at 11:03 PM, ich777 said: You have to only replace the bz* files and the changes.txt file if you want to upgrade… Exactly, but since I‘m only testing whats currently possible with ARC I don‘t have to do this currently. This is also not entirely true… have you compiled the Kernel yourself? Maybe something went wrong there since I have no issue usig the card with Emby. I‘m not too sure about Plex because I don‘t know if they are using QuickSync (which is not ready yet for ARC) but if they are using the VA-API it should be no issue at all but I can also imagine if you have a second card installed which actually uses /dev/dri/renderD128 and your ARC card is /dev/dri/renderD129 in the system this will cause issues and you need to map it from the host to the container with something like that in the template: --device=/dev/dri/renderD129:/dev/dri/renderD128 And you also have to map the card from 1 to 0 like: --device=/dev/dri/card1:/dev/dri/card0 This should work for Plex too if they are using VA-API instead of QuickSync. https://forums.plex.tv/t/anybody-get-hw-transcoding-working-with-the-a380-on-ubunutu/823618 I doubt it will work on Plex as they are still using outdated Intel UMD drivers and libs that don't match the upstream 6.2 kernel. And yes Plex only support VA-API interface instead of QuickSync interface in their modified FFmpeg. 1 Quote Link to comment
ich777 Posted February 22, 2023 Share Posted February 22, 2023 30 minutes ago, nyanmisaka said: I doubt it will work on Plex as they are still using outdated Intel UMD drivers and libs that don't match the upstream 6.2 kernel. And yes Plex only support VA-API interface instead of QuickSync interface in their modified FFmpeg. But what are they using by default? If VA-API is used the latest Intel Media Drivers are not necessary and it should work right OOB. If they are using QuickSync by default it won't work, that's fore sure. I'm not really a Plex user, I have a copy from Plex for testing purposes but nothing more and as I noticed lately they seem to transform their platform a bit, at least it seems to me that they are taking a turn into a wrong direction. Quote Link to comment
ich777 Posted February 22, 2023 Share Posted February 22, 2023 On 2/21/2023 at 12:59 AM, Clockwork Elf said: kernel 6.2 was just released, does that mean that the next unraid version will include it or it is unkknown? Most certainly no, it must reach stable first usually: Quote Link to comment
nyanmisaka Posted February 22, 2023 Share Posted February 22, 2023 20 minutes ago, ich777 said: But what are they using by default? If VA-API is used the latest Intel Media Drivers are not necessary and it should work right OOB. If they are using QuickSync by default it won't work, that's fore sure. I'm not really a Plex user, I have a copy from Plex for testing purposes but nothing more and as I noticed lately they seem to transform their platform a bit, at least it seems to me that they are taking a turn into a wrong direction. $ strings /usr/lib/plexmediaserver/lib/dri/iHD_drv_video.so | grep "iHD driver" Intel iHD driver for Intel(R) Gen Graphics - 22.4.4 (2bbbd9b) media-driver 22.4.4 They don't enable libmfx/libvpl in their FFmpeg build configs. So they use VA-API on Intel. 2 Quote Link to comment
xorinzor Posted March 5, 2023 Share Posted March 5, 2023 On 2/22/2023 at 10:47 AM, ich777 said: Most certainly no, it must reach stable first usually Linux kernel 6.2.2 is in stable now! Quote Link to comment
ich777 Posted March 5, 2023 Share Posted March 5, 2023 21 minutes ago, xorinzor said: Linux kernel 6.2.2 is in stable now! I know, 6.2.0 was released stable about a week ago... Quote Link to comment
xorinzor Posted March 5, 2023 Share Posted March 5, 2023 Ah, I wasn't really tracking it haha. Just looked and saw the updated stable version. Do you have any idea if this could mean we'll see this kernel come to unraid in a soon-ish update? or would it realistically take a while longer? Quote Link to comment
SimonF Posted March 5, 2023 Share Posted March 5, 2023 (edited) 11 minutes ago, xorinzor said: Ah, I wasn't really tracking it haha. Just looked and saw the updated stable version. Do you have any idea if this could mean we'll see this kernel come to unraid in a soon-ish update? or would it realistically take a while longer? With 6.12 ZFS support is included within the base so likely that it wont be at least until zfs confirms 6.2 support. Currently last release support upto 6.1 Edited March 5, 2023 by SimonF 1 Quote Link to comment
xorinzor Posted April 18, 2023 Share Posted April 18, 2023 ZFS now has support for 6.2 too 🎉 Quote Link to comment
PlanetDyna Posted May 10, 2023 Share Posted May 10, 2023 (edited) On 2/10/2023 at 12:54 PM, jsrk said: The easy way: download the kernel 6.2 from: github.com/DatPat/unraid_arc_g2 replace the downloaded files (bzImage, bzmodues and bzfirmware ) on your unraid usb-stick. *you may want to set a static ip as some people had issues with their dhcp config then reboot. then you should have the card available. you may then download a beta/unstable jellyfin build to use it. The hard way: download a 6.2 build of your choice from here github.com/thor2002ro/unraid_kernel Add this to the .config file: CONFIG_INTEL_MEI=m CONFIG_INTEL_MEI_ME=m CONFIG_INTEL_MEI_TXE=m CONFIG_INTEL_MEI_GSC=m CONFIG_INTEL_MEI_HDCP=m CONFIG_INTEL_MEI_PXP=m CONFIG_INTEL_MEI_WDT=m compile follow the easy way from here on out. Unfortunately, it does not work for me. I have done the following: 1) Update Unraid to 6.12.0-rc5 2) Reboot to take effect the update and shutdown afterwards 3) Downloaded "the files" from "https://github.com/DatPat/unraid_arc_g2/releases" and copied the three mentioned files to the USB drive 4) start Unraid again Here's what happens: Unraid starts but does not get an IP assigned. Normally there is always the IP above the login. Static IP is set. https://imgur.com/d1ioHBD I tried both files (RC5 and RC7) from github. -- I had to delete the network.conf. Then it worked. Edited May 10, 2023 by PlanetDyna Quote Link to comment
GRRRRRRR Posted May 10, 2023 Share Posted May 10, 2023 (edited) Someone broke it. Wasn't me. Add static IP manually. Quote: README.md unraid_arc_g2 compiled unraid kernel images to get intel arc dg2 working this was compiled from https://github.com/thor2002ro/unraid_kernel (rc5) for me dhcp was broken un this RC so you may have to set a static ip if that happens to you as well changes: bzmodules & bzimages: CONFIG_INTEL_MEI=m CONFIG_INTEL_MEI_ME=m CONFIG_INTEL_MEI_TXE=m CONFIG_INTEL_MEI_GSC=m CONFIG_INTEL_MEI_HDCP=m CONFIG_INTEL_MEI_PXP=m CONFIG_INTEL_MEI_WDT=m bzfirmware: files from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 dg2_huc_gsc.bin dg2_dmc_ver2_08.bin /etc/rc.d/rc.local: line 129: logger: command not found /etc/rc.d/rc.local: line 132: /usr/local/sbin/plugin: No such file or directory /etc/rc.d/rc.local: line 132: logger: command not found /etc/rc.d/rc.local: line 132: /usr/local/sbin/plugin: No such file or directory /etc/rc.d/rc.local: line 132: logger: command not found /etc/rc.d/rc.local: line 132: /usr/local/sbin/plugin: No such file or directory /etc/rc.d/rc.local: line 132: logger: command not found /etc/rc.d/rc.local: line 132: /usr/local/sbin/plugin: No such file or directory /etc/rc.d/rc.local: line 132: logger: command not found /etc/rc.d/rc.local: line 132: /usr/local/sbin/plugin: No such file or directory /etc/rc.d/rc.local: line 132: logger: command not found /etc/rc.d/rc.local: line 132: /usr/local/sbin/plugin: No such file or directory /etc/rc.d/rc.local: line 132: logger: command not found /etc/rc.d/rc.local: line 138: logger: command not found /etc/rc.d/rc.local: line 147: logger: command not found /etc/rc.d/rc.local: line 148: frondos: command not found agetty: cannot open UNIX socket agetty: cannot open UNIX socket Welcome to Linux 6.2.0-rc7-thor-Unraid+ x86_64 (tty1) Tower login: up In a situation where you have command-line access but not network access, you can set a static IP address for your network interface directly from the command line. Here's a step-by-step guide on how you might go about doing this: 1. **Identify your network interface:** The first thing you need to do is figure out which network interface you want to configure. You can do this with the `ip link show` or `ifconfig` command. The output should list your network interfaces. Typically, your primary ethernet interface will be something like `eth0` or `ens33`. 2. **Set the IP address:** Once you know which interface you want to configure, you can use the `ip` command to set its IP address. The command to do this is as follows: ```bash ip addr add 192.0.2.1/24 dev eth0 ``` Replace `192.0.2.1/24` with your desired IP address and subnet mask, and `eth0` with your network interface. Note that you'll need root permissions to run this command. 3. **Set the default gateway:** You'll also need to set the default gateway for your network interface. You can do this with the `ip` command as well: ```bash ip route add default via 192.0.2.254 ``` Replace `192.0.2.254` with the IP address of your gateway (typically your router's IP address). 4. **Set the DNS server:** Finally, you'll need to set your DNS server. This is done in the `/etc/resolv.conf` file. You can edit this file with a text editor like `nano` or `vi`: ```bash echo "nameserver 8.8.8.8" > /etc/resolv.conf ``` Replace `8.8.8.8` with the IP address of your preferred DNS server. The above command uses Google's DNS server. Remember, these settings will be lost after a system reboot. To make these changes persistent across reboots, you'll need to edit the network configuration file for your specific Linux distribution. For Slackware, these settings are typically stored in the `/etc/rc.d/rc.inet1.conf` file. As always, be careful when making changes to system configuration files, and only do so if you're comfortable with what you're doing. If you're not sure, it's better to ask for help rather than risk making a mistake. Edited May 10, 2023 by GRRRRRRR Quote Link to comment
martinkeat Posted December 9, 2023 Share Posted December 9, 2023 On 2/8/2023 at 7:56 PM, jsrk said: I don't think we are entitled to every operating system supporting the hardware we want or certain technical decisions made in line with our personal perferences. Having said that, you can make or download a kernel which supports ARC gpus and install it over the kernel you're currently using. I'd agree with this if the discussion was about obscure technology, but when it comes to GPUs.......... Quote Link to comment
martinkeat Posted December 9, 2023 Share Posted December 9, 2023 On 2/9/2023 at 3:34 AM, GRRRRRRR said: Ha ha I defeat you in any argument of your entire culture before you start speaking. Your fallacy, bias, and lack of information, is evident on the first or second word. I am bored. Anyway. I assert Ubuntu mainline is the best cutting edge kernel to put on a Linux system to get fresh hardware support. The best Linux kernel is the one that has the most polishing done, testing and bugfixing, compatibility testing. Performance testing and tuning. If you want the Intel stuff you get that. If you want additional stuff you fight it out with Intel to submit the correct patches to that Kernel. If you have something to say we fight it out right here right now. If unRAID wants to be a better distro, the only logical choise is to build ontop of, and in collaboration with, that existing system. Anything else is illogical. I will not show the math that proves it. Calculate yourself. No 'campaign' as you called it needed. The truth speaks for itself. Personally I would like to see the linux community get its shit together and create a set of driver standards and a centralised database for all flavours. That way a manufacturer can submit the appropriate information about a products drivers to said central database and then that driver would be converted autonomously and released all at the same time. Its one of the reasons windows and macos is so dominant and are able to treat customers the way they do, because installing software and drivers in all flavours of linux is a pain in the arse, and I say that as someone who doesn't use windows except for the VMs I need to run drivers I cant get on freakin linux. LOL 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.