frodr Posted September 20, 2023 Share Posted September 20, 2023 My server (Server1) will not shutdown, nor reboot. I do not have the correct cable to connect to the monitor to see any shutdown info. And the Asus IPMI Remote Control is not connecting either. Diagnostic from Tools and from flash /logs are included. helmaxx-diagnostics-20230920-1637.zip unbalance.log maxx-diagnostics-20230417-2127.zip Quote Link to comment
JorgeB Posted September 20, 2023 Share Posted September 20, 2023 I don't see any shutdown attempt on the diags posted. Quote Link to comment
frodr Posted September 20, 2023 Author Share Posted September 20, 2023 How to add diagnostics that shows shutdown? After shutdown in the server, the GUI drops, but the pc stays on. The only way to get it running, is to hold on/off button for a few sec. Quote Link to comment
itimpi Posted September 20, 2023 Share Posted September 20, 2023 If you want a log that survives a reboot then you need to enable the syslog server. 1 Quote Link to comment
ljm42 Posted September 20, 2023 Share Posted September 20, 2023 6 minutes ago, frodr said: How to add diagnostics that shows shutdown? After shutdown in the server, the GUI drops, but the pc stays on. The only way to get it running, is to hold on/off button for a few sec. How long are you waiting before pressing the button? Wait a bit longer. Quote Link to comment
JorgeB Posted September 21, 2023 Share Posted September 21, 2023 12 hours ago, frodr said: How to add diagnostics that shows shutdown? After shutdown in the server, the GUI drops, but the pc stays on. If Unraid is failing to do a clean shutdown it will save the diags in the flash drive, /logs folder, if it's just the server that stays on after Unraid shuts down not much you can do, look for a BIOS update. Quote Link to comment
frodr Posted September 21, 2023 Author Share Posted September 21, 2023 5 hours ago, JorgeB said: If Unraid is failing to do a clean shutdown it will save the diags in the flash drive, /logs folder, if it's just the server that stays on after Unraid shuts down not much you can do, look for a BIOS update. Thanks, I will do a bios update, then we see. Quote Link to comment
frodr Posted September 23, 2023 Author Share Posted September 23, 2023 I updated the bios. That went well....... Now the mobo is stuck on C6. No matter what I do, it stops there. I removed every nvme and pcie card possible. C6 is not referenced in the manual. But I see a few people out there have had this problem. Hummm. I am in contact with Asus support........., for what it's worth .... RMA is requested at the Reseller. Quote Link to comment
frodr Posted September 26, 2023 Author Share Posted September 26, 2023 The mobo (server1) is totally stuck in C6. I talk to Asus Support, a very strange conversion. They say it can (suddenly after bios update) be the RAM sticks. And refers to a QVL list with tested/approve RAM. Going thru this iten by item (long list), it is only 2 R-DIMM in 3200, one of the not available anywhere. Asking about this I get this answer: " We have forwarded this feedback to our HQ as well as with the parts and bios information Regarding the QVL, it is only a recommended list, and other memory modules can work as well, but that is something that is not guaranteed in those cases, but we have asked them to check if there is any upcoming updated QVL with more modules, we understand why it might be problematic The problem is often that since our Research and Development is located in Taiwan only, they cannot often not get memory modules from the Nordic market to test, but I inquired about this to see if they could help with that The sad thing is that our market here in the Nordic is very small compared to others when it comes to ECC memory, and its more common that people buy non ECC memory even for workstation products, or that many buys pure server products which is another type of market completely" According to Asus HQ Support, we have RAM sticks only for the Nordic market, and Asus HQ do not no how to order products Worldwide. What a strange Company. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.