StephenCND Posted October 3, 2023 Share Posted October 3, 2023 Getting this error msg. in Fix Common Problems, however the drive in question (3) looks fine . Status is green, not close to being full, and there are reads and writes. Note however, I recently had to replace that drives Sata cable due to a separate issue (Parity checks were taking forever). Perhaps that issue corrupted the file system? In any event, I have included a Diag. file and screen cap. Any assistance would be greatly appreciated. nasterminal1-diagnostics-20231003-1109.zip Quote Link to comment
JorgeB Posted October 3, 2023 Share Posted October 3, 2023 Syslog is being spammed with USB errors, reboot and post new diags after array start. Quote Link to comment
itimpi Posted October 3, 2023 Share Posted October 3, 2023 Your syslog is being flooded with messages relating to USB device CPS EC850LCD which makes it impossible to use them to find anything useful in them. Quote Link to comment
StephenCND Posted October 3, 2023 Author Share Posted October 3, 2023 Upon rebooting, the system shows no errors. I've included a Diag. regardless. So, you say a USB device is "spamming" ? Not sure what that might be.. something I need to fix, and how? nasterminal1-diagnostics-20231003-1255.zip Quote Link to comment
itimpi Posted October 3, 2023 Share Posted October 3, 2023 Every 5 seconds or so you are getting a message of the form: Oct 3 09:55:51 NasTerminal1 kernel: usb 9-2: new low-speed USB device number 15 using uhci_hcd Oct 3 09:55:51 NasTerminal1 kernel: hid-generic 0003:0764:0501.0011: hiddev96,hidraw2: USB HID v1.10 Device [CPS EC850LCD] on usb-0000:00:1d.3-2/input0 Oct 3 09:55:59 NasTerminal1 kernel: usb 9-2: USB disconnect, device number 15 Do you know what device this is? Quote Link to comment
JorgeB Posted October 3, 2023 Share Posted October 3, 2023 By the name looks like it's a UPS Quote Link to comment
StephenCND Posted October 3, 2023 Author Share Posted October 3, 2023 (edited) That would make sense. I do have a UPS attached to the server. But then again, this particular UPS been there for over 3 months now . Never got this error message before. Edited October 3, 2023 by StephenCND added info. Quote Link to comment
StephenCND Posted October 5, 2023 Author Share Posted October 5, 2023 How would I go about stopping this spamming, other than disconnecting the UPS? Quote Link to comment
Solution Squid Posted October 6, 2023 Solution Share Posted October 6, 2023 Make sure that in UPS settings that the system can read the UPS details correctly. If not, change the Cable Type in the settings. If the UPS daemon can't read the details properly you will get this spamming Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.