crspangenberg Posted January 2 Share Posted January 2 (edited) Hello all, I have a been using Unraid for quite some time. Over New Years weekend I decided I would rebuild my old Haskell i7 server with a Raptor Lake i7. Since the rebuild the server has not been stable. I have noticed the attached error appearing in the logs. I would appreciate any help you guys/gals can provide. tangosierra-diagnostics-20240101-1803.zip Edited January 2 by crspangenberg Uploaded Diagnostics Quote Link to comment
JorgeB Posted January 2 Share Posted January 2 You are having flash drive issues. Quote Link to comment
crspangenberg Posted January 2 Author Share Posted January 2 Okay, I will replace my flash drive and report back. Thank you! Quote Link to comment
crspangenberg Posted January 5 Author Share Posted January 5 @JorgeB, I replaced the flash drive and everything seemed to be okay, however the system crashed again today. There are new errors in the log, and I am not sure if the flash drive I used is causing them. The original drive I purchased was not supported by the disk creation utility, and I ended up having to use a drive I had lying around… I appreciate your help as always Jorge. tangosierra-diagnostics-20240104-1926.zip Quote Link to comment
trurl Posted January 5 Share Posted January 5 Change Settings for Docker from macvlan to ipvlan Quote Link to comment
crspangenberg Posted January 5 Author Share Posted January 5 I have done this in the past. I believe when the system crashed it reverted. I went back in and corrected that issue. Quote Link to comment
crspangenberg Posted January 5 Author Share Posted January 5 Additional log errors: Quote Link to comment
itimpi Posted January 5 Share Posted January 5 7 hours ago, crspangenberg said: The original drive I purchased was not supported by the disk creation utility If this happens the Manual installation method often still works OK. The creation utility seems to be a bit finicky at times. Quote Link to comment
crspangenberg Posted January 5 Author Share Posted January 5 Great, thank you for this information. I’m letting the server rebuild parity right now. With only one docker running. And I’ll see how it performs. Once the rebuild is complete I’ll slowly add in dockers to see if any are causing issues. If it crashes again I’ll attempt to replace the flash drive once more. Quote Link to comment
crspangenberg Posted January 7 Author Share Posted January 7 Server has been running mostly stable, the VM I had been using that was working perfect lost all network connections last night and nothing I could do would bring it back. i requested a new license key from Unraid for my new flash drive and will get that up and running here as soon as I have it. So far every new Windows 11 VM that I have created keeps reproducing the same error. I get it setup in VNC (same as I originally did) enable RDP, and then transferred to the nvidia RTX 3060 that I am passing through and it breaks my network connection. The redhat network adapter drops out completely, no way to get it back and no amount of updated drivers work. I am about at whits end. Quote Link to comment
Solution crspangenberg Posted January 8 Author Solution Share Posted January 8 On 1/5/2024 at 3:08 AM, itimpi said: If this happens the Manual installation method often still works OK. The creation utility seems to be a bit finicky at times. Manual installation to new flash drive has improved stability and VM issues. So far so good. Thank you! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.