Spechtus Posted August 22 Share Posted August 22 # Unraid Version 6.12.6 2023-12-01 CPU Intel® Core™ i5-4590 CPU @ 3.30GHz 4 Cores RAM 16GB DDR3 (4 RAM slots total, 2 Used, 1 not usable due to CPU fan dimensions = maximum of 3 RAM slots) Motherboard ASUST H97M-E , Version Rev X.0x Manuals: Endor Asus Motherboard Manual EN.pdf Endor Asus Motherboard Manual DE.pdf Power supplies 1 x Thermaltake Toughpower GF A3 650W 80+ Gold 1 x Bequiet generic Power supply Both power supplies are connected by using the “Phanteks Power Combo PHPWCOB_2P1M“ to add redundancy Harddrives 4 x ST4000VX016 4TB Festplatte Seagate SkyHawk SATA 6 Gb/s Cache: 256 MB Backup UPS APC Back-UPS BX950MI-GR (approx. 30-50 min. powered up time) BIOS Bios: American Megatrends Inc., Version 2602 BIOS dated: Mon 7 Dec 2015 12:00:00 AM CET RAID Storage Unraid software RAID system, currently 8 TB data storage usable in total Ethernet Onboard Ethernet; 1000 Mbps, full duplex, mtu 1500 I am getting a already handled Error which is the following: scsi host1: usb-storage 3–11:1.0 usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd usb-storage 4-6:1.0: USB Mass Storage device detected scsi host2: usb-storage 4-6:1.0 new high-speed USB device number 7 using xhci_hcd usb 3-13: USB Mass Storage device detected usb-storage 3-13:1.0: Quirks match for vid 152d pid 0578: pid 0578: 1000000 usb-storage 3–13:1.0: scsi host3: usb-storage 3–13:1.0 floppyo: no floppy controllers found /dev/root: Can't open blockdev nowb error -6 Cannot open root device "sda" or unknown-block(0,0): option; here are the available partitions: UFS: "root=" boot option; UFS: Unable to mount root Please append a correct not syncing: fs on unknown-block (0,0) Kernel panic swapper/0 Not tainted 6.1.64-Unraid #1 Šeries/H97M-E, BIOS 2602 12/07/2015 CPU: 0 PID: 1 Comm: ASUS All Series/H97M-E, Hardware Call name: Trace: <TASK> dump_stack_lvl+0x44/0x5c panic+0x10e/0x289 mount_block_root+0x1de/0x1f1 prepare_namespace+0x136/0x165 rest_init+0xcb/0xcb kernel_init+0x16/0x123 ret_from_fork+0x22/0x30 </TASK> Kernel Offset: disabled pstore: cryptro compress ck (0,0) Kernel panic crypto_comp_compress disabled failed, ret = −22 not syncing: UFS: Unable to mount root fs on unknown-block(0,0) I already tried this ( ) and wanted to ask if this ( ) temporary fix is still the right way to handle the problem? I perform itimpi's solution (I overwrite the bz files with those from the zip file) and then it boots fine. However, the problem eventually happens again. I didn't make any changes nor add any plugins. Othewise i need help please! Quote Link to comment
trurl Posted August 22 Share Posted August 22 USB2 port is more reliable for Unraid boot device Quote Link to comment
Spechtus Posted August 22 Author Share Posted August 22 Thanks, but this is the output if i try to boot from the USB2 port: Quote Link to comment
Spechtus Posted August 22 Author Share Posted August 22 I think it has to be something very obvious. And i am just not getting it. Quote Link to comment
JorgeB Posted August 22 Share Posted August 22 1 hour ago, Spechtus said: I already tried this ( Make sure you remove that since it no longer works. This is usually a flash drive problem, try using a different one. Quote Link to comment
Spechtus Posted August 23 Author Share Posted August 23 Thank you for your answer. Should i just copy and paste the existing files on flash drive into another? Quote Link to comment
JorgeB Posted August 23 Share Posted August 23 No, create a new flash drive, confirm it boots first, and if yes, restore only the /config folder from the old one. Quote Link to comment
Spechtus Posted August 23 Author Share Posted August 23 Could you send me a link to a stable 6.12.6 version where i can create the flash drive on? Quote Link to comment
ChatNoir Posted August 23 Share Posted August 23 18 minutes ago, Spechtus said: Could you send me a link to a stable 6.12.6 version Not available in the archive https://docs.unraid.net/unraid-os/download_list/ But why not 6.12.13 ? Quote Link to comment
Spechtus Posted August 23 Author Share Posted August 23 I found some versioning in the old drive and it said 6.12.6 so i thought, in order to not break anything, i will take the same version. Or is there no difference ? I already secured the config folder and tried to fix the old flash drive by scanning and repairing it. But the scan did not find any errors. Quote Link to comment
Solution JorgeB Posted August 23 Solution Share Posted August 23 Should be fine and preferable to use the latest stable. Quote Link to comment
Spechtus Posted August 23 Author Share Posted August 23 Thank you guys! The solution was to use a new Flash Drive, SanDisks are just meh for using UNRAID! Quote Link to comment
trurl Posted August 24 Share Posted August 24 I've been using Sandisk USB2 flash on both of my servers for many years and neither have failed. On 8/22/2024 at 11:53 AM, trurl said: USB2 port is more reliable for Unraid boot device Speed is unimportant in this usage. Not much data read or written, and mostly at boot time. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.