May 18, 201511 yr I'm using rsync to copy dvb modules, did you also copy firmwares from TBS ?? I don't recall seeing any relevant files there but will have a look tomorrow. Thanks piotr
May 18, 201511 yr Author There should be in tar.gz from Tbs driver just look you must copy to /lib/firmware also Please check dmesg there you should find info if firmware missing when init tuner
May 19, 201511 yr Here's RC2 with the media stuff and DVB drivers in the kernel enabled. I'd be grateful if someone tested it as I don't have a compatible tv card. EDIT: Monkeyair has kindly tested and confirmed these are working. Bzimage Bzroot Unfortunately, this doesn't include the same support for tuners that was in the 6b15 release, as both my tuners are now not working Hopefully we can get the drivers from 6b15 included - I was really enjoying watching!
May 19, 201511 yr Here's RC2 with the media stuff and DVB drivers in the kernel enabled. I'd be grateful if someone tested it as I don't have a compatible tv card. EDIT: Monkeyair has kindly tested and confirmed these are working. Bzimage Bzroot Unfortunately, this doesn't include the same support for tuners that was in the 6b15 release, as both my tuners are now not working Hopefully we can get the drivers from 6b15 included - I was really enjoying watching! No, sorry, it just includes the drivers that are included by default in the kernel. I think piotrasd uses the CrazyCat kernel. But I think this thread and my postings illustrate that I'm not quite up to adding extra drivers yet!
May 19, 201511 yr Here's RC2 with the media stuff and DVB drivers in the kernel enabled. I'd be grateful if someone tested it as I don't have a compatible tv card. EDIT: Monkeyair has kindly tested and confirmed these are working. Bzimage Bzroot Unfortunately, this doesn't include the same support for tuners that was in the 6b15 release, as both my tuners are now not working Hopefully we can get the drivers from 6b15 included - I was really enjoying watching! No, sorry, it just includes the drivers that are included by default in the kernel. I think piotrasd uses the CrazyCat kernel. But I think this thread and my postings illustrate that I'm not quite up to adding extra drivers yet! Totally wasn't complaining, just observing I hope piotrasd pushes rc2 at his earliest convenience then, it was so nice to have OTA PVR again
May 19, 201511 yr Here's RC2 with the media stuff and DVB drivers in the kernel enabled. I'd be grateful if someone tested it as I don't have a compatible tv card. EDIT: Monkeyair has kindly tested and confirmed these are working. Bzimage Bzroot Unfortunately, this doesn't include the same support for tuners that was in the 6b15 release, as both my tuners are now not working Hopefully we can get the drivers from 6b15 included - I was really enjoying watching! No, sorry, it just includes the drivers that are included by default in the kernel. I think piotrasd uses the CrazyCat kernel. But I think this thread and my postings illustrate that I'm not quite up to adding extra drivers yet! Totally wasn't complaining, just observing I hope piotrasd pushes rc2 at his earliest convenience then, it was so nice to have OTA PVR again I didn't take it as a complaint at all mate. Out of interest, what tuners are you using?
May 19, 201511 yr I didn't take it as a complaint at all mate. Out of interest, what tuners are you using? From LSPCI - 05:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04) 06:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) One's frontend chipset is LG and the other is Samsung though. I should have written them down when it was loading them, but alas... they are both Hauppauge 1250 cards, one is a 2211 and the other is a 7911. 05:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04) Subsystem: Hauppauge computer works Inc. Device 2211 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdc00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express Endpoint, MSI 00 Capabilities: [80] Power Management version 3 Capabilities: [90] Vital Product Data Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel 06:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) Subsystem: Hauppauge computer works Inc. Device 7911 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fda00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express Endpoint, MSI 00 Capabilities: [80] Power Management version 2 Capabilities: [90] Vital Product Data Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel
May 20, 201511 yr Right, so it's apparent that my MediaBuild is sometimes a bit hit & miss, but here's RC3. As always it detects no tuners because my card isn't in the kernel. I've changed tack slightly and am now compiling the drivers as modules rather than including them in the kernel. I'm hoping that might help. Tophicles - Which mediabuild do you normally use when piotrasd posts them - the regular or CrazyCat one? Rename the files to bzroot & bzimage and remember to keep backups of your old bzroot & bzimage so you can roll back if there are any problems either with my Media Build or with RC3 itself. bzroot-RC3-MediaBuild bzimage-RC3-MediaBuild
May 20, 201511 yr I have CHBMB's RC3 build running and can confirm that he's done a cracking job! All good over here
May 20, 201511 yr Right, so it's apparent that my MediaBuild is sometimes a bit hit & miss, but here's RC3. As always it detects no tuners because my card isn't in the kernel. I've changed tack slightly and am now compiling the drivers as modules rather than including them in the kernel. I'm hoping that might help. Tophicles - Which mediabuild do you normally use when piotrasd posts them - the regular or CrazyCat one? Rename the files to bzroot & bzimage and remember to keep backups of your old bzroot & bzimage so you can roll back if there are any problems either with my Media Build or with RC3 itself. bzroot-RC3-MediaBuild bzimage-RC3-MediaBuild Hey, Have you included all the drivers for USB TV Tuners for RC3? When I tried your RC2 build, my tuner wasn't detected and I ended up building my own. Cheers
May 20, 201511 yr Hey, Have you included all the drivers for USB TV Tuners for RC3? When I tried your RC2 build, my tuner wasn't detected and I ended up building my own. Cheers I believe so, as long as your drivers are in the kernel.
May 21, 201511 yr All good in the hood with your rc3 kernel So awesome, now I have my programs recording and I spent an hour matching up channel icons in the EPG - whew! So very many thanks for the assistance! Now, if we could just get people to update the OP when there is a new version of the plugin or tvheadend/vdr packages! It gets tedious to hunt through the posts to find the updated versions. If it would help, I've got a webserver where the packages could be hosted as long as we wish...
May 21, 201511 yr Hello, I'm a longtime Ubuntu tvheadend user and now trying to get it working on unRAID. I've installed the v6.0 plugin and am using CHBMB's Media tree enabled RC3. The plugin works and the Media tree is detected...unfortunately, my Hauppauge HVR-2250 tuner is not detected by the plugin. root@mediaserver:~# dmesg | grep saa saa7164 driver loaded CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected] saa7164[0]/0: found at 0000:01:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfe400000 saa7164_downloadfirmware() no first image saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) saa7164 0000:01:00.0: Direct firmware load for NXP7164-2010-03-10.1.fw failed with error -2 saa7164_downloadfirmware() Upload failed. (file not found?) In Ubuntu, I'd just drop NXP7164-2010-03-10.1.fw in /lib/firmware and it would work, but that's obviously not possible here. Will I need to learn how to compile this in myself? Or am I missing something simple? Thanks!
May 21, 201511 yr Hello, I'm a longtime Ubuntu tvheadend user and now trying to get it working on unRAID. I've installed the v6.0 plugin and am using CHBMB's Media tree enabled RC3. The plugin works and the Media tree is detected...unfortunately, my Hauppauge HVR-2250 tuner is not detected by the plugin. root@mediaserver:~# dmesg | grep saa saa7164 driver loaded CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected] saa7164[0]/0: found at 0000:01:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfe400000 saa7164_downloadfirmware() no first image saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw) saa7164 0000:01:00.0: Direct firmware load for NXP7164-2010-03-10.1.fw failed with error -2 saa7164_downloadfirmware() Upload failed. (file not found?) In Ubuntu, I'd just drop NXP7164-2010-03-10.1.fw in /lib/firmware and it would work, but that's obviously not possible here. Will I need to learn how to compile this in myself? Or am I missing something simple? Thanks! Yeah, there's a few posts on my efforts at achieving the same with a TBS card, hoping for some help on it myself.
May 21, 201511 yr All good in the hood with your rc3 kernel So awesome, now I have my programs recording and I spent an hour matching up channel icons in the EPG - whew! So very many thanks for the assistance! Now, if we could just get people to update the OP when there is a new version of the plugin or tvheadend/vdr packages! It gets tedious to hunt through the posts to find the updated versions. If it would help, I've got a webserver where the packages could be hosted as long as we wish... I'll send piotrasd a message and see how he feels about it all, I agree that a central point would be useful, there have been a few people instrumental in getting tvhead to work on Unraid, piotrasd obviously, saarg, mettbrot, and W-W I think it would be great if a single direction was planned, personally I think docker for tvheadend is the way forward, VDR I've never used and I'm not sure piotrasd is still developing it, and I think if we can disseminate the information on how to compile a kernel and add in extra drivers, then things would run fairly smoothly. gfjardim has posted a script earlier in this thread that's great for recompiling (needs a small alteration now we're on v4 of the kernel) but adding in extra drivers is where I get completely flummoxed!
May 21, 201511 yr I spoke too soon May 21 02:00:00 Angband tvheadend[15907]: CRASH: Signal: 6 in PRG: tvheadend (0.0.0~unknown) [800f6dfb9c22063bf32111aa88823ebfb1e88c01] CWD: / May 21 02:00:00 Angband tvheadend[15907]: CRASH: Fault address 0x3e23 (N/A) May 21 02:00:00 Angband tvheadend[15907]: CRASH: Loaded libraries: linux-vdso.so.1 /lib64/libssl.so.1 /lib64/libcrypto.so.1 /lib64/libz.so.1 /usr/lib64/liburiparser.so.1 /usr/lib64/libavahi-common.so.3 /usr/lib64/libavahi-client.so.3 /lib64/libdl.so.2 /lib64/libpthread.so.0 /lib64/libm.so.6 /usr/lib64/libiconv.so.2 /lib64/librt.so.1 /lib64/libc.so.6 /lib64/ld-linux-x86-64.so.2 /usr/lib64/../lib64/libssp.so.0 /usr/lib64/../lib64/libdbus-1.so.3 /lib64/libnss_files.so.2 May 21 02:00:00 Angband tvheadend[15907]: CRASH: Register dump [23]: fefefefefefefefffeff2d6bff092d630000000000000008000000000000020200000000009e6e4900000000009e6eb0000000000000000000000000000000120000000000003e230000000000003e2300002ba7015240b800002ba6ff6d60000000000000000006000000000000000000002ba7013d697900007ffc87c97d8800002ba7013d69790000000000000202000000000000003300000000000000000000000000000000fffffffe7ffbba150000000000000000 May 21 02:00:00 Angband tvheadend[15907]: CRASH: STACKTRACE May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x45e19a May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x2ba700997670 May 21 02:00:00 Angband tvheadend[15907]: CRASH: gsignal+0x39 (/lib64/libc.so.6) May 21 02:00:00 Angband tvheadend[15907]: CRASH: abort+0x148 (/lib64/libc.so.6) May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x2ba7013cf966 May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x2ba7013cfa12 May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x48c5ea May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x48a459 May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x42adac May 21 02:00:00 Angband tvheadend[15907]: CRASH: __libc_start_main+0xf5 (/lib64/libc.so.6) May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x42bfdd Can't get TVHeadEnd to stay running, log is full of dumps like this. Not sure what has changed but it didn't do this before.
May 21, 201511 yr I spoke too soon May 21 02:00:00 Angband tvheadend[15907]: CRASH: Signal: 6 in PRG: tvheadend (0.0.0~unknown) [800f6dfb9c22063bf32111aa88823ebfb1e88c01] CWD: / May 21 02:00:00 Angband tvheadend[15907]: CRASH: Fault address 0x3e23 (N/A) May 21 02:00:00 Angband tvheadend[15907]: CRASH: Loaded libraries: linux-vdso.so.1 /lib64/libssl.so.1 /lib64/libcrypto.so.1 /lib64/libz.so.1 /usr/lib64/liburiparser.so.1 /usr/lib64/libavahi-common.so.3 /usr/lib64/libavahi-client.so.3 /lib64/libdl.so.2 /lib64/libpthread.so.0 /lib64/libm.so.6 /usr/lib64/libiconv.so.2 /lib64/librt.so.1 /lib64/libc.so.6 /lib64/ld-linux-x86-64.so.2 /usr/lib64/../lib64/libssp.so.0 /usr/lib64/../lib64/libdbus-1.so.3 /lib64/libnss_files.so.2 May 21 02:00:00 Angband tvheadend[15907]: CRASH: Register dump [23]: fefefefefefefefffeff2d6bff092d630000000000000008000000000000020200000000009e6e4900000000009e6eb0000000000000000000000000000000120000000000003e230000000000003e2300002ba7015240b800002ba6ff6d60000000000000000006000000000000000000002ba7013d697900007ffc87c97d8800002ba7013d69790000000000000202000000000000003300000000000000000000000000000000fffffffe7ffbba150000000000000000 May 21 02:00:00 Angband tvheadend[15907]: CRASH: STACKTRACE May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x45e19a May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x2ba700997670 May 21 02:00:00 Angband tvheadend[15907]: CRASH: gsignal+0x39 (/lib64/libc.so.6) May 21 02:00:00 Angband tvheadend[15907]: CRASH: abort+0x148 (/lib64/libc.so.6) May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x2ba7013cf966 May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x2ba7013cfa12 May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x48c5ea May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x48a459 May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x42adac May 21 02:00:00 Angband tvheadend[15907]: CRASH: __libc_start_main+0xf5 (/lib64/libc.so.6) May 21 02:00:00 Angband tvheadend[15907]: CRASH: 0x42bfdd Can't get TVHeadEnd to stay running, log is full of dumps like this. Not sure what has changed but it didn't do this before. Are you using the plugin, the program or the docker? Would recommend tobbenb's docker - unstable been rock solid for me.
May 21, 201511 yr Using Mettbrott's plugin. It used to work fine. It seems it's when a program is attempted to be recorded: May 21 10:28:57 Angband tvheadend[24888]: CRASH: Signal: 6 in PRG: tvheadend (0.0.0~unknown) [800f6dfb9c22063bf32111aa88823ebfb1e88c01] CWD: / May 21 10:28:57 Angband tvheadend[24888]: CRASH: Fault address 0x6138 (N/A) May 21 10:28:57 Angband tvheadend[24888]: CRASH: Loaded libraries: linux-vdso.so.1 /lib64/libssl.so.1 /lib64/libcrypto.so.1 /lib64/libz.so.1 /usr/lib64/liburiparser.so.1 /usr/lib64/libavahi-common.so.3 /usr/lib64/libavahi-client.so.3 /lib64/libdl.so.2 /lib64/libpthread.so.0 /lib64/libm.so.6 /usr/lib64/libiconv.so.2 /lib64/librt.so.1 /lib64/libc.so.6 /lib64/ld-linux-x86-64.so.2 /usr/lib64/../lib64/libssp.so.0 /usr/lib64/../lib64/libdbus-1.so.3 /lib64/libnss_files.so.2 May 21 10:28:57 Angband tvheadend[24888]: CRASH: Register dump [23]: fefefefefefefeffffffffff000000000000000000000008000000000000020200000000009e6e4900000000009e6eb00000000000edfd20000000000000003100000000000061380000000000007d2000002b79ad4ec0b800002b79ab6a00000000000000000006000000000000000000002b79ad39e97900002b79bd60943800002b79ad39e9790000000000000202747300000000003300000000000000000000000000000000fffffffe7ffbba130000000000000000 May 21 10:28:57 Angband tvheadend[24888]: CRASH: STACKTRACE May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x45e19a May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x2b79ac95f670 May 21 10:28:57 Angband tvheadend[24888]: CRASH: gsignal+0x39 (/lib64/libc.so.6) May 21 10:28:57 Angband tvheadend[24888]: CRASH: abort+0x148 (/lib64/libc.so.6) May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x2b79ad397966 May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x2b79ad397a12 May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x48c5ea May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x48a459 May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x48ab11 May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x478a7c May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x497ad1 May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x43af20 May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x43b61c May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x43b9bb May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x4377f0 May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x434546 May 21 10:28:57 Angband tvheadend[24888]: CRASH: 0x2b79ac957ce2 May 21 10:28:57 Angband tvheadend[24888]: CRASH: clone+0x6d (/lib64/libc.so.6)
May 21, 201511 yr Try the docker, would eliminate dependency problems with the new Unraid and Mettbrot's plugin.
May 21, 201511 yr Try the docker, would eliminate dependency problems with the new Unraid and Mettbrot's plugin. I tried the Docker but it won't detect my TV tuners
May 21, 201511 yr Thanks to gfjardim (for the script) and CHBMB (for posting how he got to where he was) I have a working HVR-2250 version. For anyone that wants it...(v6.0, RC3, HVR-2250) https://drive.google.com/file/d/0B_2WZKRTYU6TWUo5NlZUNmdnaDg/view?usp=sharing
May 21, 201511 yr Try the docker, would eliminate dependency problems with the new Unraid and Mettbrot's plugin. I tried the Docker but it won't detect my TV tuners How many tuners do you have?
May 21, 201511 yr Have a look here tophicles, you need to make a small addition to your go file and pass through the tuners. http://lime-technology.com/forum/index.php?topic=37671.msg374083.msg#374083
May 21, 201511 yr Thanks to gfjardim (for the script) and CHBMB (for posting how he got to where he was) I have a working HVR-2250 version. For anyone that wants it...(v6.0, RC3, HVR-2250) https://drive.google.com/file/d/0B_2WZKRTYU6TWUo5NlZUNmdnaDg/view?usp=sharing Mind telling me how you got your drivers added in. Got stuck on that bit!
May 21, 201511 yr Try the docker, would eliminate dependency problems with the new Unraid and Mettbrot's plugin. I tried the Docker but it won't detect my TV tuners I've got an idea on how to make this process easier. Give me a day or so to test and speak to saarg.
Archived
This topic is now archived and is closed to further replies.