sparklyballs Posted April 13, 2015 Share Posted April 13, 2015 Sonarr version bumped to Sonarr Ver. 2.0.0.3046 in the develop branch. it's in my beta repo if you wish to test. link below. Quote Link to comment
sparklyballs Posted April 13, 2015 Share Posted April 13, 2015 Also, regardless of whether the develop branch works or not, it should be noted that there is a big difference between your downloader getting the file and manually getting the file, one is via api and one isn't. Quote Link to comment
Berg Posted April 14, 2015 Share Posted April 14, 2015 I was wondering if anyone could help me get an update, or find a way to update to update the Docker prepared by @huricanehernandez for Subsonic. I want to use Subsonic as a server for my Sonos system and the new version 5.2.1 of Subsonic support Sonos with the current version of the Docker here - https://github.com/HurricaneHernandez/container-templates which is 5.0 does not. I wish I knew what I was doing, but I don't - any help you could give me would be appreciated. Thank you. Quote Link to comment
muzo178 Posted April 16, 2015 Share Posted April 16, 2015 trying to setup needo's sickbeard after replacing my cache drive. getting an error though. seems like an ubuntu patch is not being found: *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 3 not upgraded. Need to get 84.4 kB/3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.92.200 80] E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.92.200 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickbeard': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... any ideas? Quote Link to comment
sparklyballs Posted April 16, 2015 Share Posted April 16, 2015 trying to setup needo's sickbeard after replacing my cache drive. getting an error though. seems like an ubuntu patch is not being found: *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 3 not upgraded. Need to get 84.4 kB/3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.92.200 80] E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.92.200 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickbeard': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... any ideas? that seems like either ubuntu server issue or something related to internet connectivity your end (firewall getting too enthusiastic or something similar) Quote Link to comment
muzo178 Posted April 16, 2015 Share Posted April 16, 2015 trying to setup needo's sickbeard after replacing my cache drive. getting an error though. seems like an ubuntu patch is not being found: *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 3 not upgraded. Need to get 84.4 kB/3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.92.200 80] E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.92.200 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickbeard': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... any ideas? that seems like either ubuntu server issue or something related to internet connectivity your end (firewall getting too enthusiastic or something similar) looks like that patch (patch_2.7.1-4ubuntu1_amd64.deb) it's looking for is no longer at the http://archive.ubuntu.com/ubuntu/pool/main/p/patch/ adress Quote Link to comment
sparklyballs Posted April 16, 2015 Share Posted April 16, 2015 trying to setup needo's sickbeard after replacing my cache drive. getting an error though. seems like an ubuntu patch is not being found: *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 3 not upgraded. Need to get 84.4 kB/3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.92.200 80] E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.92.200 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickbeard': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... any ideas? that seems like either ubuntu server issue or something related to internet connectivity your end (firewall getting too enthusiastic or something similar) looks like that patch (patch_2.7.1-4ubuntu1_amd64.deb) it's looking for is no longer at the http://archive.ubuntu.com/ubuntu/pool/main/p/patch/ adress no problems here.. sparklyballs@Time-Machine:~$ apt-get install -s patch NOTE: This is only a simulation! apt-get needs root privileges for real execution. Keep also in mind that locking is deactivated, so don't depend on the relevance to the real current situation! Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: diffutils-doc The following packages will be upgraded: patch 1 to upgrade, 0 to newly install, 0 to remove and 3 not to upgrade. Inst patch [2.7.1-4ubuntu1] (2.7.1-4ubuntu2 Ubuntu:14.04/trusty-updates [amd64]) Conf patch (2.7.1-4ubuntu2 Ubuntu:14.04/trusty-updates [amd64]) just noticed, the patch version is different. it probably hasn't propagated through all the packages yet, you're going to have to wait i'm afraid. just checked needo's edge.sh code and there's no apt-get update in there. i'm not that certain about how apt works if it has to update to pick up a version change in extra packages which patch is to git. Quote Link to comment
sparklyballs Posted April 16, 2015 Share Posted April 16, 2015 edit the container in the template and change edge from 0 to 1 start the container and then at unraid command line docker ps -a note the name for the sickbeard container and then docker exec -it <dockername> bash this should give you a prompt inside the container. nano /etc/my_init.d/edge.sh and before the apt-get install git line put in apt-get update save the file exit <<< MAJORLY IMPORTANT TO EXIT OUT OF THE CONTAINER PROMPT OR UNRAID MAY CRASH THE WEBUI then reedit the container template putting back the edge 1 variable. Quote Link to comment
muzo178 Posted April 17, 2015 Share Posted April 17, 2015 edit the container in the template and change edge from 0 to 1 start the container and then at unraid command line docker ps -a note the name for the sickbeard container and then docker exec -it <dockername> bash this should give you a prompt inside the container. nano /etc/my_init.d/edge.sh and before the apt-get install git line put in apt-get update save the file exit <<< MAJORLY IMPORTANT TO EXIT OUT OF THE CONTAINER PROMPT OR UNRAID MAY CRASH THE WEBUI then reedit the container template putting back the edge 1 variable. i see what you're getting at but the docker does not stay up long enough to do any of this.. Quote Link to comment
sparklyballs Posted April 17, 2015 Share Posted April 17, 2015 edit the container in the template and change edge from 0 to 1 start the container and then at unraid command line docker ps -a note the name for the sickbeard container and then docker exec -it <dockername> bash this should give you a prompt inside the container. nano /etc/my_init.d/edge.sh and before the apt-get install git line put in apt-get update save the file exit <<< MAJORLY IMPORTANT TO EXIT OUT OF THE CONTAINER PROMPT OR UNRAID MAY CRASH THE WEBUI then reedit the container template putting back the edge 1 variable. i see what you're getting at but the docker does not stay up long enough to do any of this.. hence taking out the edge variable. it that doesn't work, delete the container and any contents of your config folder. taking out the edge variable should make it fallback to whatever version of sickbeard it installs by default, then you can go back in and make the changes and then reset the variable. Quote Link to comment
muzo178 Posted April 17, 2015 Share Posted April 17, 2015 edit the container in the template and change edge from 0 to 1 start the container and then at unraid command line docker ps -a note the name for the sickbeard container and then docker exec -it <dockername> bash this should give you a prompt inside the container. nano /etc/my_init.d/edge.sh and before the apt-get install git line put in apt-get update save the file exit <<< MAJORLY IMPORTANT TO EXIT OUT OF THE CONTAINER PROMPT OR UNRAID MAY CRASH THE WEBUI then reedit the container template putting back the edge 1 variable. i see what you're getting at but the docker does not stay up long enough to do any of this.. hence taking out the edge variable. it that doesn't work, delete the container and any contents of your config folder. taking out the edge variable should make it fallback to whatever version of sickbeard it installs by default, then you can go back in and make the changes and then reset the variable. taking out the EDGE variable presents another problem and my sickbeard database becomes unusable with the older version and it can't launch. switched to the binhex-sickbeard for now. Quote Link to comment
clowrym Posted April 19, 2015 Share Posted April 19, 2015 PLEASE DELETE....SEEMS Everything just started working after 2 days of trial and error....... I'm having a issue with the latest b15 update, my plexwatch history doesn't seem to update anymore. I don't see any issues in the log files, or the update files. I tried removing & reinstalling...but nothing seems to help..... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... No SSH host key available. Generating one... Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... invoke-rc.d: policy-rc.d denied execution of restart. *** Running /etc/my_init.d/edge.sh... Bleeding edge not requested *** Running /etc/my_init.d/firstrun.sh... Downloading plexWatch.pl... --2015-04-19 08:40:05-- https://raw.github.com/ljunkie/plexWatch/master/plexWatch.pl Resolving raw.github.com (raw.github.com)... 199. Connecting to raw.github.com (raw.github.com)|199.|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://raw.githubusercontent.com/ljunkie/plexWatch/master/plexWatch.pl [following] --2015-04-19 08:40:06-- https://raw.githubusercontent.com/ljunkie/plexWatch/master/plexWatch.pl Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 199. Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|199.|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 181361 (177K) [text/plain] Saving to: '/plexWatch/plexWatch.pl' 0K .......... .......... .......... .......... .......... 28% 261K 0s 50K .......... .......... .......... .......... .......... 56% 340K 0s 100K .......... .......... .......... .......... .......... 84% 263K 0s 150K .......... .......... ....... 100% 526K=0.6s 2015-04-19 08:40:07 (305 KB/s) - '/plexWatch/plexWatch.pl' saved [181361/181361] Downloading plexWatch config.pl --2015-04-19 08:40:07-- https://raw.github.com/ljunkie/plexWatch/master/config.pl-dist Resolving raw.github.com (raw.github.com)... 199. Connecting to raw.github.com (raw.github.com)|199.|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://raw.githubusercontent.com/ljunkie/plexWatch/master/config.pl-dist [following] --2015-04-19 08:40:07-- https://raw.githubusercontent.com/ljunkie/plexWatch/master/config.pl-dist Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 199. Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|199.|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 13350 (13K) [text/plain] Saving to: '/plexWatch/config.pl-dist' 0K .......... ... 100% 198M=0s 2015-04-19 08:40:12 (198 MB/s) - '/plexWatch/config.pl-dist' saved [13350/13350] Plex Media Server.log located in /log directory Using default plexWatchWeb config.php *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 103 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message *** Shutting down runit daemon (PID 103)... *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Bleeding edge not requested *** Running /etc/my_init.d/firstrun.sh... Plex Media Server.log located in /log directory *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 10 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message *** Shutting down runit daemon (PID 10)... *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Bleeding edge not requested *** Running /etc/my_init.d/firstrun.sh... Plex Media Server.log located in /log directory *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 10 AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message Quote Link to comment
ijuarez Posted April 20, 2015 Share Posted April 20, 2015 trying to setup needo's sickbeard after replacing my cache drive. getting an error though. seems like an ubuntu patch is not being found: *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 3 not upgraded. Need to get 84.4 kB/3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.92.200 80] E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.92.200 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickbeard': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... any ideas? Just happened to me, with sickrage. it snatched a show and then it quit. I guess we need to ping needo. Quote Link to comment
sparklyballs Posted April 20, 2015 Share Posted April 20, 2015 i made a pull request on needo's sickbeard repo and it got merged about 10 minutes ago. Quote Link to comment
ijuarez Posted April 20, 2015 Share Posted April 20, 2015 i made a pull request on needo's sickbeard repo and it got merged about 10 minutes ago. still not working for me After this operation, 22.5 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main rsync amd64 3.1.0-2ubuntu0.1 [283 kB] Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB] Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2555 kB] Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.92.200 80] Fetched 3557 kB in 14s (239 kB/s) E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.92.200 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... ip is not being blocked, not an emergency or me. When it gets fixed i appreciated all of your guys hard work Quote Link to comment
sparklyballs Posted April 20, 2015 Share Posted April 20, 2015 i made a pull request on needo's sickbeard repo and it got merged about 10 minutes ago. still not working for me After this operation, 22.5 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main rsync amd64 3.1.0-2ubuntu0.1 [283 kB] Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB] Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2555 kB] Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.92.200 80] Fetched 3557 kB in 14s (239 kB/s) E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.92.200 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... ip is not being blocked, not an emergency or me. When it gets fixed i appreciated all of your guys hard work have you updated the container ? Quote Link to comment
ijuarez Posted April 20, 2015 Share Posted April 20, 2015 i made a pull request on needo's sickbeard repo and it got merged about 10 minutes ago. still not working for me After this operation, 22.5 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main rsync amd64 3.1.0-2ubuntu0.1 [283 kB] Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB] Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2555 kB] Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.92.200 80] Fetched 3557 kB in 14s (239 kB/s) E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.92.200 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... ip is not being blocked, not an emergency or me. When it gets fixed i appreciated all of your guys hard work have you updated the container ? Yes it doesn't pull any new data and the same error persists Quote Link to comment
sparklyballs Posted April 20, 2015 Share Posted April 20, 2015 I don't think you have updated it, i just pulled the container myself and the changes i made are there. if you're still getting the same error, then it's not updated because line 9 is not the git command any longer, i added a line before it and it's now line 10. *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Ign http://archive.ubuntu.com trusty InRelease Ign http://archive.ubuntu.com trusty-updates InRelease Ign http://archive.ubuntu.com trusty-security InRelease Hit http://archive.ubuntu.com trusty Release.gpg Get:1 http://archive.ubuntu.com trusty-updates Release.gpg [933 B] Get:2 http://archive.ubuntu.com trusty-security Release.gpg [933 B] Hit http://archive.ubuntu.com trusty Release Get:3 http://archive.ubuntu.com trusty-updates Release [63.5 kB] Ign http://us.archive.ubuntu.com trusty InRelease Get:4 http://archive.ubuntu.com trusty-security Release [63.5 kB] Ign http://us.archive.ubuntu.com trusty-updates InRelease Hit http://archive.ubuntu.com trusty/main Sources Hit http://archive.ubuntu.com trusty/restricted Sources Hit http://archive.ubuntu.com trusty/universe Sources Hit http://archive.ubuntu.com trusty/main amd64 Packages Hit http://archive.ubuntu.com trusty/restricted amd64 Packages Hit http://archive.ubuntu.com trusty/universe amd64 Packages Hit http://us.archive.ubuntu.com trusty Release.gpg Get:5 http://archive.ubuntu.com trusty-updates/main Sources [248 kB] Get:6 http://us.archive.ubuntu.com trusty-updates Release.gpg [933 B] Hit http://us.archive.ubuntu.com trusty Release Get:7 http://archive.ubuntu.com trusty-updates/restricted Sources [2,310 B] Get:8 http://archive.ubuntu.com trusty-updates/universe Sources [139 kB] Get:9 http://us.archive.ubuntu.com trusty-updates Release [63.5 kB] Get:10 http://archive.ubuntu.com trusty-updates/main amd64 Packages [635 kB] Hit http://us.archive.ubuntu.com trusty/universe amd64 Packages Hit http://us.archive.ubuntu.com trusty/multiverse amd64 Packages Get:11 http://archive.ubuntu.com trusty-updates/restricted amd64 Packages [15.1 kB] Get:12 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [351 kB] Get:13 http://us.archive.ubuntu.com trusty-updates/universe amd64 Packages [351 kB] Get:14 http://archive.ubuntu.com trusty-security/main Sources [97.2 kB] Get:15 http://archive.ubuntu.com trusty-security/restricted Sources [1,874 B] Get:16 http://archive.ubuntu.com trusty-security/universe Sources [22.5 kB] Get:17 http://archive.ubuntu.com trusty-security/multiverse Sources [1,750 B] Get:18 http://archive.ubuntu.com trusty-security/main amd64 Packages [329 kB] Get:19 http://archive.ubuntu.com trusty-security/restricted amd64 Packages [14.8 kB] Get:20 http://archive.ubuntu.com trusty-security/universe amd64 Packages [123 kB] Get:21 http://archive.ubuntu.com trusty-security/multiverse amd64 Packages [3,282 B] Get:22 http://us.archive.ubuntu.com trusty-updates/multiverse amd64 Packages [12.6 kB] Fetched 2,542 kB in 2s (902 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 60 not upgraded. Need to get 3,713 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main rsync amd64 3.1.0-2ubuntu0.1 [283 kB] Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] Get:3 http://archive.ubuntu.com/ubuntu/ trusty-updates/main git-man all 1:1.9.1-1ubuntu0.1 [698 kB] Get:4 http://archive.ubuntu.com/ubuntu/ trusty-updates/main git amd64 1:1.9.1-1ubuntu0.1 [2,627 kB] Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu2 [84.3 kB] Fetched 3,713 kB in 4s (915 kB/s) Selecting previously unselected package rsync. (Reading database ... 16242 files and directories currently installed.) Preparing to unpack .../rsync_3.1.0-2ubuntu0.1_amd64.deb ... Unpacking rsync (3.1.0-2ubuntu0.1) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ... Unpacking liberror-perl (0.17-1.1) ... Selecting previously unselected package git-man. Preparing to unpack .../git-man_1%3a1.9.1-1ubuntu0.1_all.deb ... Unpacking git-man (1:1.9.1-1ubuntu0.1) ... Selecting previously unselected package git. Preparing to unpack .../git_1%3a1.9.1-1ubuntu0.1_amd64.deb ... Unpacking git (1:1.9.1-1ubuntu0.1) ... Selecting previously unselected package patch. Preparing to unpack .../patch_2.7.1-4ubuntu2_amd64.deb ... Unpacking patch (2.7.1-4ubuntu2) ... Processing triggers for ureadahead (0.100.0-16) ... Setting up rsync (3.1.0-2ubuntu0.1) ... Removing any system startup links for /etc/init.d/rsync ... update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match rsync Default-Stop values (none) Adding system startup for /etc/init.d/rsync ... /etc/rc0.d/K20rsync -> ../init.d/rsync /etc/rc1.d/K20rsync -> ../init.d/rsync /etc/rc6.d/K20rsync -> ../init.d/rsync /etc/rc2.d/S20rsync -> ../init.d/rsync /etc/rc3.d/S20rsync -> ../init.d/rsync /etc/rc4.d/S20rsync -> ../init.d/rsync /etc/rc5.d/S20rsync -> ../init.d/rsync invoke-rc.d: policy-rc.d denied execution of restart. Setting up liberror-perl (0.17-1.1) ... Setting up git-man (1:1.9.1-1ubuntu0.1) ... Setting up git (1:1.9.1-1ubuntu0.1) ... Setting up patch (2.7.1-4ubuntu2) ... Processing triggers for ureadahead (0.100.0-16) ... Cloning into '/opt/sickbeard'... *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 147 Apr 20 05:27:00 ad754e8e72c7 syslog-ng[156]: syslog-ng starting up; version='3.5.3' 05:27:00 INFO::MAIN :: Checking database structure... 05:27:00 INFO::MAIN :: Database upgrade required: Initial Schema 05:27:01 INFO::MAIN :: Checking database structure... 05:27:01 INFO::MAIN :: Database upgrade required: Initial Schema 05:27:01 INFO::MAIN :: Database upgrade required: Add Scene Exceptions 05:27:01 INFO::MAIN :: Database upgrade required: Add Scene Name Cache 05:27:02 INFO::MAIN :: No duplicate show, check passed 05:27:02 INFO::MAIN :: No duplicate episode, check passed 05:27:02 INFO::MAIN :: No orphan episodes, check passed 05:27:02 INFO::MAIN :: Starting Sick Beard on http://0.0.0.0:8081/ 05:27:02 INFO::MAIN :: Loading initial show list 05:27:02 INFO::CHECKVERSION :: Checking if git needs an update 05:27:03 INFO::CHECKVERSION :: No update needed 05:27:03 INFO::CHECKVERSION :: Check scene exceptions update 05:27:03 INFO::CHECKVERSION :: Updating scene exceptions 05:27:03 INFO::CHECKVERSION :: Clear name cache 05:27:03 INFO::CHECKVERSION :: Performing a vacuum on database: cache.db 05:28:02 INFO::SEARCHQUEUE-RSS-SEARCH :: Changing all old missing episodes (UNAIRED) to status WANTED 05:28:02 INFO::SEARCHQUEUE-RSS-SEARCH :: Beginning search for new episodes on RSS 05:28:02 INFO::SEARCHQUEUE-RSS-SEARCH :: Searching all providers for any needed episodes 05:28:02 INFO::SEARCHQUEUE-RSS-SEARCH :: Clearing Womble's Index cache and updating with new information 05:28:26 INFO::SEARCHQUEUE-RSS-SEARCH :: Clearing Sick Beard Index cache and updating with new information 05:28:37 INFO::SEARCHQUEUE-RSS-SEARCH :: No needed episodes found on the RSS feeds Quote Link to comment
ijuarez Posted April 20, 2015 Share Posted April 20, 2015 Change the edge variable to 1 (sorry for the long paste) IMAGE ID [b778fcef82eb]: Pulling image (latest) from needo/sickrage. Pulling image (latest) from needo/sickrage, endpoint: https://registry-1.docker.io/v1/. Pulling dependent layers. IMAGE ID [511136ea3c5a]: Download complete. IMAGE ID [5e66087f3ffe]: Download complete. IMAGE ID [4d26dd3ebc1c]: Download complete. IMAGE ID [d4010efcfd86]: Download complete. IMAGE ID [99ec81b80c55]: Download complete. IMAGE ID [82c9a6741336]: Download complete. IMAGE ID [5cbfee875b7b]: Download complete. IMAGE ID [afc7fc2f17c1]: Download complete. IMAGE ID [68bde466ffab]: Download complete. IMAGE ID [37fd06241067]: Download complete. IMAGE ID [dabfc8a44cb5]: Download complete. IMAGE ID [5a3249ff7b58]: Download complete. IMAGE ID [6e2d23b463ff]: Download complete. IMAGE ID [14a94cb00a1a]: Download complete. IMAGE ID [9f95e13710fa]: Download complete. IMAGE ID [8515593fa116]: Download complete. IMAGE ID [e8124e88940f]: Download complete. IMAGE ID [4f38eb32aeca]: Download complete. IMAGE ID [7c2fa31f36e3]: Download complete. IMAGE ID [bd40b65d7d63]: Download complete. IMAGE ID [7212ef7a4e32]: Download complete. IMAGE ID [9466371e4dbb]: Download complete. IMAGE ID [41be17ec9328]: Download complete. IMAGE ID [58ee09723e29]: Download complete. IMAGE ID [c230e42ba3f8]: Download complete. IMAGE ID [1bb5ab150f16]: Download complete. IMAGE ID [48f60c5438b0]: Download complete. IMAGE ID [b97a086d0d86]: Download complete. IMAGE ID [d5ec3f951ca2]: Download complete. IMAGE ID [a6639dbe3d30]: Download complete. IMAGE ID [267ebe8552b0]: Download complete. IMAGE ID [539519b23fb1]: Download complete. IMAGE ID [18c2d95f8aff]: Download complete. IMAGE ID [73f996cb11b2]: Download complete. IMAGE ID [b778fcef82eb]: Download complete. Status: Image is up to date for needo/sickrage:latest. TOTAL DATA PULLED: 0 MB Command: root@localhost:# /usr/bin/docker rm -f SickRage SickRage The command finished successfully! Command: root@localhost:# /usr/bin/docker run -d --name="SickRage" --net="bridge" -e EDGE="1" -e TZ="America/Chicago" -p 8081:8081/tcp -v "/mnt/user/appdata/sickrage":"/config":rw -v "/mnt/cache/downlaoddir/complete/":"/downloads":rw -v "/mnt/user/Media/TV Shows/":"/tv":rw needo/sickrage 78bb834a66507ad1afb62668a2cad068944aad5d4dc8ff38e749a1d78db8532e The command finished successfully! Log E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb'>http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.91.24 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Fetched 3557 kB in 3s (997 kB/s) /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 46 not upgraded. Need to get 84.4 kB/3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.91.15 80] E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb'>http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.91.15 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 Quote Link to comment
sparklyballs Posted April 20, 2015 Share Posted April 20, 2015 Change the edge variable to 1 (sorry for the long paste) IMAGE ID [b778fcef82eb]: Pulling image (latest) from needo/sickrage. Pulling image (latest) from needo/sickrage, endpoint: https://registry-1.docker.io/v1/. Pulling dependent layers. IMAGE ID [511136ea3c5a]: Download complete. IMAGE ID [5e66087f3ffe]: Download complete. IMAGE ID [4d26dd3ebc1c]: Download complete. IMAGE ID [d4010efcfd86]: Download complete. IMAGE ID [99ec81b80c55]: Download complete. IMAGE ID [82c9a6741336]: Download complete. IMAGE ID [5cbfee875b7b]: Download complete. IMAGE ID [afc7fc2f17c1]: Download complete. IMAGE ID [68bde466ffab]: Download complete. IMAGE ID [37fd06241067]: Download complete. IMAGE ID [dabfc8a44cb5]: Download complete. IMAGE ID [5a3249ff7b58]: Download complete. IMAGE ID [6e2d23b463ff]: Download complete. IMAGE ID [14a94cb00a1a]: Download complete. IMAGE ID [9f95e13710fa]: Download complete. IMAGE ID [8515593fa116]: Download complete. IMAGE ID [e8124e88940f]: Download complete. IMAGE ID [4f38eb32aeca]: Download complete. IMAGE ID [7c2fa31f36e3]: Download complete. IMAGE ID [bd40b65d7d63]: Download complete. IMAGE ID [7212ef7a4e32]: Download complete. IMAGE ID [9466371e4dbb]: Download complete. IMAGE ID [41be17ec9328]: Download complete. IMAGE ID [58ee09723e29]: Download complete. IMAGE ID [c230e42ba3f8]: Download complete. IMAGE ID [1bb5ab150f16]: Download complete. IMAGE ID [48f60c5438b0]: Download complete. IMAGE ID [b97a086d0d86]: Download complete. IMAGE ID [d5ec3f951ca2]: Download complete. IMAGE ID [a6639dbe3d30]: Download complete. IMAGE ID [267ebe8552b0]: Download complete. IMAGE ID [539519b23fb1]: Download complete. IMAGE ID [18c2d95f8aff]: Download complete. IMAGE ID [73f996cb11b2]: Download complete. IMAGE ID [b778fcef82eb]: Download complete. Status: Image is up to date for needo/sickrage:latest. TOTAL DATA PULLED: 0 MB Command: root@localhost:# /usr/bin/docker rm -f SickRage SickRage The command finished successfully! Command: root@localhost:# /usr/bin/docker run -d --name="SickRage" --net="bridge" -e EDGE="1" -e TZ="America/Chicago" -p 8081:8081/tcp -v "/mnt/user/appdata/sickrage":"/config":rw -v "/mnt/cache/downlaoddir/complete/":"/downloads":rw -v "/mnt/user/Media/TV Shows/":"/tv":rw needo/sickrage 78bb834a66507ad1afb62668a2cad068944aad5d4dc8ff38e749a1d78db8532e The command finished successfully! Log E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb'>http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.91.24 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Fetched 3557 kB in 3s (997 kB/s) /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 46 not upgraded. Need to get 84.4 kB/3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.91.15 80] E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb'>http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.91.15 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 well it's working here is all i can say, you are somehow not getting the latest dockerhub build because i can categorically state that the git command is on line 10 now and not line 9. it was on line 9 before the update, i added a line to update apt before it, hence it's now on line 10. how are you updating ? something is not right. Quote Link to comment
Berg Posted April 20, 2015 Share Posted April 20, 2015 I was wondering if anyone could help me get an update, or find a way to update to update the Docker prepared by @huricanehernandez for Subsonic. I want to use Subsonic as a server for my Sonos system and the new version 5.2.1 of Subsonic support Sonos with the current version of the Docker here - https://github.com/HurricaneHernandez/container-templates which is 5.0 does not. I wish I knew what I was doing, but I don't - any help you could give me would be appreciated. Thank you. Outstanding - I noticed an update was available for this Docker which updates Subsonic to 5.2.1. This is likely the perfect solution for those of us using Sonos with a music collection that exceeds the ~65000 track limit of the Sonos system. Thank you!!! I would still love to either learn more about how to update/create a Docker, or work with @huricanehernandez - there are a few other things that might me this Subsonic Docker ever better for Sonos users. Quote Link to comment
sparklyballs Posted April 20, 2015 Share Posted April 20, 2015 updated edge.sh original edge.sh note in the original the git command is line 9, your error message is saying /etc/my_init.d/edge.sh: line 9: git: command not found so you don't have the update. there is some breakdown between dockerhub and you getting the update perhaps ? i don't know, but all i can say is it's clear you don't have latest build. Quote Link to comment
ijuarez Posted April 20, 2015 Share Posted April 20, 2015 Change the edge variable to 1 (sorry for the long paste) IMAGE ID [b778fcef82eb]: Pulling image (latest) from needo/sickrage. Pulling image (latest) from needo/sickrage, endpoint: https://registry-1.docker.io/v1/. Pulling dependent layers. IMAGE ID [511136ea3c5a]: Download complete. IMAGE ID [5e66087f3ffe]: Download complete. IMAGE ID [4d26dd3ebc1c]: Download complete. IMAGE ID [d4010efcfd86]: Download complete. IMAGE ID [99ec81b80c55]: Download complete. IMAGE ID [82c9a6741336]: Download complete. IMAGE ID [5cbfee875b7b]: Download complete. IMAGE ID [afc7fc2f17c1]: Download complete. IMAGE ID [68bde466ffab]: Download complete. IMAGE ID [37fd06241067]: Download complete. IMAGE ID [dabfc8a44cb5]: Download complete. IMAGE ID [5a3249ff7b58]: Download complete. IMAGE ID [6e2d23b463ff]: Download complete. IMAGE ID [14a94cb00a1a]: Download complete. IMAGE ID [9f95e13710fa]: Download complete. IMAGE ID [8515593fa116]: Download complete. IMAGE ID [e8124e88940f]: Download complete. IMAGE ID [4f38eb32aeca]: Download complete. IMAGE ID [7c2fa31f36e3]: Download complete. IMAGE ID [bd40b65d7d63]: Download complete. IMAGE ID [7212ef7a4e32]: Download complete. IMAGE ID [9466371e4dbb]: Download complete. IMAGE ID [41be17ec9328]: Download complete. IMAGE ID [58ee09723e29]: Download complete. IMAGE ID [c230e42ba3f8]: Download complete. IMAGE ID [1bb5ab150f16]: Download complete. IMAGE ID [48f60c5438b0]: Download complete. IMAGE ID [b97a086d0d86]: Download complete. IMAGE ID [d5ec3f951ca2]: Download complete. IMAGE ID [a6639dbe3d30]: Download complete. IMAGE ID [267ebe8552b0]: Download complete. IMAGE ID [539519b23fb1]: Download complete. IMAGE ID [18c2d95f8aff]: Download complete. IMAGE ID [73f996cb11b2]: Download complete. IMAGE ID [b778fcef82eb]: Download complete. Status: Image is up to date for needo/sickrage:latest. TOTAL DATA PULLED: 0 MB Command: root@localhost:# /usr/bin/docker rm -f SickRage SickRage The command finished successfully! Command: root@localhost:# /usr/bin/docker run -d --name="SickRage" --net="bridge" -e EDGE="1" -e TZ="America/Chicago" -p 8081:8081/tcp -v "/mnt/user/appdata/sickrage":"/config":rw -v "/mnt/cache/downlaoddir/complete/":"/downloads":rw -v "/mnt/user/Media/TV Shows/":"/tv":rw needo/sickrage 78bb834a66507ad1afb62668a2cad068944aad5d4dc8ff38e749a1d78db8532e The command finished successfully! Log E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb'>http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.91.24 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Fetched 3557 kB in 3s (997 kB/s) /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 46 not upgraded. Need to get 84.4 kB/3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 404 Not Found [iP: 91.189.91.15 80] E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb'>http://archive.ubuntu.com/ubuntu/pool/main/p/patch/patch_2.7.1-4ubuntu1_amd64.deb 404 Not Found [iP: 91.189.91.15 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? /etc/my_init.d/edge.sh: line 9: git: command not found chown: cannot access '/opt/sickrage': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 well it's working here is all i can say, you are somehow not getting the latest dockerhub build because i can categorically state that the git command is on line 10 now and not line 9. it was on line 9 before the update, i added a line to update apt before it, hence it's now on line 10. how are you updating ? something is not right. I've click on the "Check for updates" i click on the container to edit it, except for adding the EDGE=1 variable this morning, I usually press save and it pulls update if any. I am i doing it ass backwards? Quote Link to comment
sparklyballs Posted April 20, 2015 Share Posted April 20, 2015 you have to click update container rather than edit. Quote Link to comment
ijuarez Posted April 20, 2015 Share Posted April 20, 2015 you have to click update container rather than edit. Yeah i tried that and its not go, i guess it just foobar, i will just start a new container and delete this one. no biggie Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.