hellow Posted December 13, 2015 Share Posted December 13, 2015 I've tried with that but still a 401 error. No stars just alphanumerical. CP/Sab and sickrage all connect and work. Do you use the plex pass version of pms or the main one? Tried restarting htpc manager? Quote Link to comment
Ashe Posted December 13, 2015 Share Posted December 13, 2015 Plexpass using needos docker. I am just restarting waiting for it to refresh the packages as it would not start in host mode Quote Link to comment
CHBMB Posted December 13, 2015 Share Posted December 13, 2015 I'm using the linuxserver.io version of Plex (naturally) and do have plexpass. Quote Link to comment
hellow Posted December 13, 2015 Share Posted December 13, 2015 Ok, I was referring to the own build that plex pass users can download and install. But it should work then. Quote Link to comment
Ashe Posted December 13, 2015 Share Posted December 13, 2015 In between changing from bridge to host and back again htpc has been stuck for 30 mins refreshing packages so I will restart the config again tomorrow and see if it makes a difference Quote Link to comment
HarryRosen Posted December 13, 2015 Share Posted December 13, 2015 Restart got it working for me, is it possible to hide sections? on the plex tab under movies Quote Link to comment
Ashe Posted December 14, 2015 Share Posted December 14, 2015 Also now working after the reboot. Thanks CHBMB and hellow Quote Link to comment
CHBMB Posted December 14, 2015 Share Posted December 14, 2015 Restart got it working for me, is it possible to hide sections? on the plex tab under movies I'd guess it would be related to the ignore sections box in the Plex settings, but I'd be lying if I said I knew. Perhaps hellow can help as he's the author of HTPC-Manager Also now working after the reboot. Thanks CHBMB and hellow You're welcome. Quote Link to comment
hellow Posted December 14, 2015 Share Posted December 14, 2015 Restart got it working for me, is it possible to hide sections? on the plex tab under movies I'd guess it would be related to the ignore sections box in the Plex settings, but I'd be lying if I said I knew. Perhaps hellow can help as he's the author of HTPC-Manager Also now working after the reboot. Thanks CHBMB and hellow You're welcome. Your right. The ignore section is for that. Simply add what section title to ignore list like this: kids movies, guilty pleasures, etc Quote Link to comment
HarryRosen Posted December 14, 2015 Share Posted December 14, 2015 Didn't even see that. Thanks Quote Link to comment
sparklyballs Posted December 14, 2015 Share Posted December 14, 2015 Restart got it working for me, is it possible to hide sections? on the plex tab under movies I'd guess it would be related to the ignore sections box in the Plex settings, but I'd be lying if I said I knew. Perhaps hellow can help as he's the author of HTPC-Manager Also now working after the reboot. Thanks CHBMB and hellow You're welcome. Your right. The ignore section is for that. Simply add what section title to ignore list like this: kids movies, guilty pleasures, etc oh boy, don't tell him he's right, the rest of linuxserver team will never hear the end of it. Quote Link to comment
hellow Posted December 14, 2015 Share Posted December 14, 2015 Restart got it working for me, is it possible to hide sections? on the plex tab under movies I'd guess it would be related to the ignore sections box in the Plex settings, but I'd be lying if I said I knew. Perhaps hellow can help as he's the author of HTPC-Manager Also now working after the reboot. Thanks CHBMB and hellow You're welcome. Your right. The ignore section is for that. Simply add what section title to ignore list like this: kids movies, guilty pleasures, etc oh boy, don't tell him he's right, the rest of linuxserver team will never hear the end of it. Oh noes. Too late, I guess you just have to suck it up Thanks for helping out regarding support questions Quote Link to comment
CHBMB Posted December 14, 2015 Share Posted December 14, 2015 Oh noes. Too late, I guess you just have to suck it up Thanks for helping out regarding support questions Your app, our container, seems to work out pretty well. Thanks to you too.... Quote Link to comment
j0nnymoe Posted February 23, 2016 Share Posted February 23, 2016 Been trying to use SSL but I have this error message coming up This webpage is not available ERR_SSL_VERSION_OR_CIPHER_MISMATCH Hide details A secure connection cannot be established because this site uses an unsupported protocol or cipher suite. This is likely to be caused when the server needs RC4, which is no longer considered secure. Can anyone help? Does this happen in chrome? have you tried a different browser? Quote Link to comment
itschrisonline Posted February 24, 2016 Share Posted February 24, 2016 It is happening on all browsers. This is the same cert I use on sickrage and couchpotato on Firefox 44.0.2 Secure Connection Failed An error occurred during a connection to pillownet.com:19099. The server rejected the handshake because the client downgraded to a lower TLS version than the server supports. (Error code: ssl_error_inappropriate_fallback_alert) The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform them of this problem. IE 11 This page canrsquo;t be displayed Turn on TLS 1.0, TLS 1.1 and TLS 1.2 in Advanced settings and try connecting to https://pillownet.com:19099 again. If this error persists, contact your site administrator. Quote Link to comment
gshlomi Posted March 15, 2016 Share Posted March 15, 2016 Hi. Need a little help setting the different modules up. I'm using linuxserver.io Apache docker as a reverse proxy, redirecting all traffic to https (port 443) with a valid certificate, securing most of the apps with their built-in authentication optins, the others using .htaccess. I have, for instance, CouchPotato accessible by https://mydomain.org/couchpotato. How do I setup the CouchPotato module in HTPC-Manager? Searched all over the net for some settings guilde, but couldn't find any... Thanks EDIT: ok, so HTPC-Manager uses the same URLs as I've set up my reverse proxy (mydomain.org/couchpotato), so changing my proxy to mydomain.org/cp made it available for HTPC-Manager to use. Quote Link to comment
gshlomi Posted March 16, 2016 Share Posted March 16, 2016 @hellowlol Is it possible to setup HTPC-Manager default permissions to read/view only, and set an admin user with access to settings/etc. ? I'd like HTPC-Manager to be my domain's homepage, but don't want any visitor to change my settings or downloads. Thanks Quote Link to comment
hellow Posted March 18, 2016 Share Posted March 18, 2016 There isn't any "default" user account. If you enable authentication you get one admin account. Just add more users with the restricted users role. Quote Link to comment
gshlomi Posted March 20, 2016 Share Posted March 20, 2016 What I want to achieve is a read-only status homepage for all my apps, with authentication for changing HTPCManger or the configured apps settings (like pausing or removing downloads). If I understand correctly, it isn't possible. Any plans of implementing something like that in the future? Quote Link to comment
BRiT Posted March 20, 2016 Share Posted March 20, 2016 What I want to achieve is a read-only status homepage for all my apps, with authentication for changing HTPCManger or the configured apps settings (like pausing or removing downloads). If I understand correctly, it isn't possible. Any plans of implementing something like that in the future? Uhm have you tried doing what you were instructed to do? Just add more users with the restricted users role. Quote Link to comment
gshlomi Posted March 20, 2016 Share Posted March 20, 2016 What I want to achieve is a read-only status homepage for all my apps, with authentication for changing HTPCManger or the configured apps settings (like pausing or removing downloads). If I understand correctly, it isn't possible. Any plans of implementing something like that in the future? Uhm have you tried doing what you were instructed to do? Just add more users with the restricted users role. Tried that, but still gets an authentication screen when accessing the portal. Am I doing something wrong? Quote Link to comment
BRiT Posted March 20, 2016 Share Posted March 20, 2016 What I want to achieve is a read-only status homepage for all my apps, with authentication for changing HTPCManger or the configured apps settings (like pausing or removing downloads). If I understand correctly, it isn't possible. Any plans of implementing something like that in the future? Uhm have you tried doing what you were instructed to do? Just add more users with the restricted users role. Tried that, but still gets an authentication screen when accessing the portal. Am I doing something wrong? Login as the readonly user at that point. Quote Link to comment
gshlomi Posted March 20, 2016 Share Posted March 20, 2016 That's what I try to avoid - I want the interface automatically opened in a read only state, without requiring user and pass... Quote Link to comment
hellow Posted March 20, 2016 Share Posted March 20, 2016 No that isnt possible and i have no plans to add it Quote Link to comment
Solid Rhino Posted March 23, 2016 Share Posted March 23, 2016 Hi. Need a little help setting the different modules up. I'm using linuxserver.io Apache docker as a reverse proxy, redirecting all traffic to https (port 443) with a valid certificate, securing most of the apps with their built-in authentication optins, the others using .htaccess. I have, for instance, CouchPotato accessible by https://mydomain.org/couchpotato. How do I setup the CouchPotato module in HTPC-Manager? Searched all over the net for some settings guilde, but couldn't find any... Thanks EDIT: ok, so HTPC-Manager uses the same URLs as I've set up my reverse proxy (mydomain.org/couchpotato), so changing my proxy to mydomain.org/cp made it available for HTPC-Manager to use. I use nginx and I have got the same problem. How can I fix this? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.