GoChris Posted August 27, 2016 Share Posted August 27, 2016 "The check_hash option executes a hash check when a torrent download is complete or rTorrent is started. When starting, it checks for errors in your completed files. " source... https://wiki.archlinux.org/index.php/RTorrent That's good to know. I have that option set to off like I said so...makes no sense why it should recheck on start. It never did that before, and does it on a new install as well. So if there are no issues, and it's not working as designed, what is the next step? Quote Link to comment
sparklyballs Posted August 27, 2016 Share Posted August 27, 2016 "The check_hash option executes a hash check when a torrent download is complete or rTorrent is started. When starting, it checks for errors in your completed files. " source... https://wiki.archlinux.org/index.php/RTorrent That's good to know. I have that option set to off like I said so...makes no sense why it should recheck on start. It never did that before, and does it on a new install as well. So if there are no issues, and it's not working as designed, what is the next step? The current latest image has the setting hash check = yes by default, the only other time the setting was in the config file (either on or off) was back in january. so i'd fully expect a new installation to hash check, and considering the recommended upgrade path was a new setup of appdata from scratch, until you do that i can't predict the stability of any resultant setup until you use the upgraded image as recommended and designed. Quote Link to comment
GoChris Posted August 27, 2016 Share Posted August 27, 2016 I've already stated two times I started with a new appdata. The same situation still presents itself. Quote Link to comment
sparklyballs Posted August 27, 2016 Share Posted August 27, 2016 I've already stated two times I started with a new appdata. The same situation still presents itself. and i'd expect a new install to do that... "The current latest image has the setting hash check = yes" and the only other time that hash check was an option in the config (on or off) was back in january. Quote Link to comment
GoChris Posted August 27, 2016 Share Posted August 27, 2016 I've obviously not made myselft clear. I tried a new appdata, I set the option to no, and then after adding a torrent, checking it to 100%, I restarted the container. On startup, the torrent was set to stop, and starting it forced a recheck. Is that the intended behavior with hack check = no? Quote Link to comment
bobbintb Posted September 26, 2016 Share Posted September 26, 2016 Ever since the update that changed to a new base docker image I have had an issue with random, occasional crashes. I will go to the webui and it gives that cannot connect/make sure it is actually running error message". The docker is still running but I have to restart to get back access to the webui. Quote Link to comment
GoChris Posted September 27, 2016 Share Posted September 27, 2016 Can you add these themes in the next build? I added them manually and the light theme is oh so pretty. Thanks https://github.com/exetico/FlatUI Quote Link to comment
d1wepn Posted October 10, 2016 Share Posted October 10, 2016 any chance of getting autodl-irssi included? seems like a major feature to be missing. ps - love your work! Quote Link to comment
Symbiot78 Posted October 11, 2016 Share Posted October 11, 2016 Ever since the update that changed to a new base docker image I have had an issue with random, occasional crashes. I will go to the webui and it gives that cannot connect/make sure it is actually running error message". The docker is still running but I have to restart to get back access to the webui. I'm seeing the same issues... timeouts. Rutorrent seems to stop running often. I've deleted and repulled the container a few times without any difference. Quote Link to comment
Symbiot78 Posted October 18, 2016 Share Posted October 18, 2016 Ever since the update that changed to a new base docker image I have had an issue with random, occasional crashes. I will go to the webui and it gives that cannot connect/make sure it is actually running error message". The docker is still running but I have to restart to get back access to the webui. Try deleting all torrents and deleting all files in session folder. then restart the container. that worked for me. Quote Link to comment
vurt Posted November 6, 2016 Share Posted November 6, 2016 Is there a Chrome extension to use with this? And can we use labels to move finished files into folders? Quote Link to comment
FlyGuy94 Posted November 16, 2016 Share Posted November 16, 2016 Am I the only one who has problems with this since a version or two when I updated the container a couple of weeks ago I saw an empty rutorrent with this error message "Bad response from server: (500 [error,getplugins]) Internal Server Error" It seems like It can't connect to rtorrent and load the pluggins nor the torrents. Also afther a couple of hours running this my docker img fills up. I tried deleting the docker img but it didn't help. Can this be fixed without me losing my torrents? Quote Link to comment
CHBMB Posted November 16, 2016 Share Posted November 16, 2016 Am I the only one who has problems with this since a version or two when I updated the container a couple of weeks ago I saw an empty rutorrent with this error message "Bad response from server: (500 [error,getplugins]) Internal Server Error" It seems like It can't connect to rtorrent and load the pluggins nor the torrents. Also afther a couple of hours running this my docker img fills up. I tried deleting the docker img but it didn't help. Can this be fixed without me losing my torrents? If your docker.img is filling up it's a config issue. But unless you post more info, can't help you any further. See the link in my sig. Quote Link to comment
FlyGuy94 Posted November 16, 2016 Share Posted November 16, 2016 Am I the only one who has problems with this since a version or two when I updated the container a couple of weeks ago I saw an empty rutorrent with this error message "Bad response from server: (500 [error,getplugins]) Internal Server Error" It seems like It can't connect to rtorrent and load the pluggins nor the torrents. Also afther a couple of hours running this my docker img fills up. I tried deleting the docker img but it didn't help. Can this be fixed without me losing my torrents? If your docker.img is filling up it's a config issue. But unless you post more info, can't help you any further. See the link in my sig. This is what I have but It doesn't say much. Also Sonarr works perfectly with it. It can connect and add and import torrents. Quote Link to comment
CHBMB Posted November 16, 2016 Share Posted November 16, 2016 Am I the only one who has problems with this since a version or two when I updated the container a couple of weeks ago I saw an empty rutorrent with this error message "Bad response from server: (500 [error,getplugins]) Internal Server Error" It seems like It can't connect to rtorrent and load the pluggins nor the torrents. Also afther a couple of hours running this my docker img fills up. I tried deleting the docker img but it didn't help. Can this be fixed without me losing my torrents? If your docker.img is filling up it's a config issue. But unless you post more info, can't help you any further. See the link in my sig. This is what I have but It doesn't say much. Also Sonarr works perfectly with it. It can connect and add and import torrents. Where have you got the downloads set to within the rutorrent webui setup? Quote Link to comment
FlyGuy94 Posted November 16, 2016 Share Posted November 16, 2016 Am I the only one who has problems with this since a version or two when I updated the container a couple of weeks ago I saw an empty rutorrent with this error message "Bad response from server: (500 [error,getplugins]) Internal Server Error" It seems like It can't connect to rtorrent and load the pluggins nor the torrents. Also afther a couple of hours running this my docker img fills up. I tried deleting the docker img but it didn't help. Can this be fixed without me losing my torrents? If your docker.img is filling up it's a config issue. But unless you post more info, can't help you any further. See the link in my sig. This is what I have but It doesn't say much. Also Sonarr works perfectly with it. It can connect and add and import torrents. Where have you got the downloads set to within the rutorrent webui setup? I have it at /data/incoming and /data/complete for finished torrents. Because It needs to be thesame for sonarr to work. But I can't check in the webui because it doesn't load the plugins and I only see the general tab in the settings. Quote Link to comment
CHBMB Posted November 16, 2016 Share Posted November 16, 2016 You tried deleting and repulling the container? Failing that as you've mentioned your docker.img is full you may want to delete and recreate that as well. Quote Link to comment
FlyGuy94 Posted November 16, 2016 Share Posted November 16, 2016 You tried deleting and repulling the container? Failing that as you've mentioned your docker.img is full you may want to delete and recreate that as well. Do I lose my config if I do that? I have alot of torrents that I don't want to lose. Quote Link to comment
CHBMB Posted November 16, 2016 Share Posted November 16, 2016 You tried deleting and repulling the container? Failing that as you've mentioned your docker.img is full you may want to delete and recreate that as well. Do I lose my config if I do that? I have alot of torrents that I don't want to lose. You shouldn't do, provided the torrents aren't stored in the docker image.... (2nd option) But at the moment it doesn't seem like you have much to lose? Quote Link to comment
FlyGuy94 Posted November 16, 2016 Share Posted November 16, 2016 You tried deleting and repulling the container? Failing that as you've mentioned your docker.img is full you may want to delete and recreate that as well. Do I lose my config if I do that? I have alot of torrents that I don't want to lose. You shouldn't do, provided the torrents aren't stored in the docker image.... (2nd option) But at the moment it doesn't seem like you have much to lose? No sorry I backed up my config and tried removing the rutorrent image + removing docker img file. I only redownloaded the rutorrent image but its still the same result. So the problem is somewhere in the config? Quote Link to comment
CHBMB Posted November 16, 2016 Share Posted November 16, 2016 Looks that way yeah... Quote Link to comment
FlyGuy94 Posted November 16, 2016 Share Posted November 16, 2016 Looks that way yeah... So what now? Can I find a more detailed log inside the config directory or the docker image itself? Quote Link to comment
CHBMB Posted November 16, 2016 Share Posted November 16, 2016 Looks that way yeah... So what now? Can I find a more detailed log inside the config directory or the docker image itself? If there is one it'll be in /config somewhere, I can't recall if there is off the top of my head. Quote Link to comment
FlyGuy94 Posted November 16, 2016 Share Posted November 16, 2016 Looks that way yeah... So what now? Can I find a more detailed log inside the config directory or the docker image itself? If there is one it'll be in /config somewhere, I can't recall if there is off the top of my head. Found this in rutorrent.error.log 2016/11/07 13:04:00 [error] 273#0: *204 FastCGI sent in stderr: "PHP message: PHP Warning: fopen(/config/rutorrent/profiles/settings/uisettings.json): failed to open stream: No such file or directory in /usr/share/webapps/rutorrent/php/getsettings.php on line 7" while reading response header from upstream, client: 192.168.0.15, server: _, request: "POST /php/getsettings.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php-fpm-rutorrent.sock:", host: "192.168.0.10:8520", referrer: "http://192.168.0.10:8520/" 2016/11/07 17:07:11 [error] 264#0: *7 FastCGI sent in stderr: "PHP message: PHP Notice: Undefined offset: 22 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 196 PHP message: PHP Notice: Undefined offset: 23 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 198 PHP message: PHP Notice: Undefined offset: 24 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 193 PHP message: PHP Notice: Undefined offset: 26 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 196 PHP message: PHP Notice: Undefined offset: 27 in /usr/share/webapps/rutorrent/plugins/extratio/rules.php on line 198" while reading response header from upstream, client: 192.168.0.15, server: _, request: "POST /plugins/extratio/action.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php-fpm-rutorrent.sock:", host: "192.168.0.10:8520", referrer: "http://192.168.0.10:8520/" 2016/11/10 13:34:34 [error] 263#0: *9554 FastCGI sent in stderr: "PHP message: PHP Fatal error: Uncaught Error: Call to undefined function mb_strlen() in /usr/share/webapps/rutorrent/plugins/_task/task.php:142 Stack trace: #0 /usr/share/webapps/rutorrent/plugins/_task/task.php(155): rTask::tail('/config/rutorre...') #1 /usr/share/webapps/rutorrent/plugins/_task/task.php(210): rTask::processLog('/config/rutorre...', 'log', Array, 0, 0) #2 /usr/share/webapps/rutorrent/plugins/_task/task.php(280): rTask::check('14787496605823e...') #3 /usr/share/webapps/rutorrent/plugins/_task/task.php(306): rTaskManager::obtain() #4 /usr/share/webapps/rutorrent/plugins/_task/init.php(5): rTaskManager::cleanup() #5 /usr/share/webapps/rutorrent/php/getplugins.php(495): require_once('/usr/share/weba...') #6 {main} thrown in /usr/share/webapps/rutorrent/plugins/_task/task.php on line 142" while reading response header from upstream, client: 141.134.238.230, server: _, request: "GET /php/getplugins.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php-fpm-rutorrent.sock:", host: "178.118.50.151:8520", referrer: "http://178.118.50.151:8520/" 2016/11/10 13:36:43 [error] 262#0: *1 FastCGI sent in stderr: "PHP message: PHP Fatal error: Uncaught Error: Call to undefined function mb_strlen() in /usr/share/webapps/rutorrent/plugins/_task/task.php:142 Stack trace: #0 /usr/share/webapps/rutorrent/plugins/_task/task.php(155): rTask::tail('/config/rutorre...') #1 /usr/share/webapps/rutorrent/plugins/_task/task.php(210): rTask::processLog('/config/rutorre...', 'log', Array, 0, 0) #2 /usr/share/webapps/rutorrent/plugins/_task/task.php(280): rTask::check('14787496605823e...') #3 /usr/share/webapps/rutorrent/plugins/_task/task.php(306): rTaskManager::obtain() #4 /usr/share/webapps/rutorrent/plugins/_task/init.php(5): rTaskManager::cleanup() #5 /usr/share/webapps/rutorrent/php/getplugins.php(495): require_once('/usr/share/weba...') #6 {main} It keeps repeating thesame thing over and over. Quote Link to comment
FlyGuy94 Posted November 22, 2016 Share Posted November 22, 2016 So after the latest update to the rutorrent docker everything seems working again so thanks whatever changes were made are working for me. Still need to run some tests but everything seems working again down to the theme I had installed. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.