Seeker14491 Posted June 19, 2016 Share Posted June 19, 2016 I recently installed unRAID on my old gaming laptop. I run Plex Media Server via Docker, and I also run a Windows Server 2012 R2 vm in it. I've got a 600GB hard drive inside the laptop, and I've got a 500GB hard drive hooked up to it via a USB enclosure (the laptop has space for only one internal drive). This USB drive is not part of the unRAID array, as unRAID does not support USB drives in the array. I'd like to upgrade my storage so I have at least 4TB of usable space, along with data protection through a parity drive. What are the best ways I could do this? I've considered getting an external enclosure such as https://www.amazon.com/Mediasonic-ProBox-HF2-SU3S2-SATA-Enclosure/dp/B003X26VV4/ , putting 3 x 3TB drives in it such as these https://www.amazon.com/dp/B00D1GYNU8/ , and connecting it to my laptop via e-SATA. This setup would cost $400. I've heard people mention that the single e-SATA port would slow down the drives though. Ports and slots on the laptop 1x Mini-IEEE 1394 Port 1x e-SATA Port 1x USB 3.0 Port 3x USB 2.0 Port 1x ExpressCard/34/54 Slot Laptop specs Model: Clevo W86CU Graphics Card: GeForce GTX 460M Processor: Intel Core i7-740QM Memory: 8GB Link to comment
trurl Posted June 19, 2016 Share Posted June 19, 2016 Multiple drives on one eSATA slows things down when multiple drives are accessed at the same time. When checking parity, or when building parity or rebuilding a data disk, all disks are accessed at the same time. And when writing a data disk, parity is written also, so multiple drives involved there also. So this is why these things are not recommended. Also, unRAID supports USB for array or cache drives in 6.2betas. Having said all that, I don't really see the point of an unRAID laptop, except perhaps as a temporary testbed. There are other ways to have VMs without a NAS, and any NAS without space for multiple drives seems pointless. Link to comment
testdasi Posted June 19, 2016 Share Posted June 19, 2016 Have you considered other options beside unRAID? Why did you choose unRAID to begin with? Based on the usage you reported, there's really no need for unRAID at all. * Plex server can be run in Windows. * There are several VM solutions for Windows * I'm guessing you are not having a parity drive either? Link to comment
Seeker14491 Posted June 19, 2016 Author Share Posted June 19, 2016 Before unRAID I was running just Windows Server 2012 R2 on the laptop. One of the main reasons I installed unRAID was just to try something new. It seems to me like I lose nothing by switching to unRAID, as I can still run Windows in a vm. The other reason I switched is that I wanted to setup some kind of data redundancy, and unRAID's parity protection sounded good both in terms of data protection and space efficiency. Link to comment
CHBMB Posted June 20, 2016 Share Posted June 20, 2016 But you can only have parity protection if you can connect enough drives. I personally think installing Unraid on a laptop is like putting a Ferrari engine in a lawnmower.... Link to comment
Squid Posted June 20, 2016 Share Posted June 20, 2016 http://m.agriaffaires.co.uk/used/lawn-tractor/1/9214/gianni-ferrari.html Sent from my LG-D852 using Tapatalk Link to comment
CHBMB Posted June 20, 2016 Share Posted June 20, 2016 http://m.agriaffaires.co.uk/used/lawn-tractor/1/9214/gianni-ferrari.html Sent from my LG-D852 using Tapatalk Well I'll be damned... lol Link to comment
korith Posted June 20, 2016 Share Posted June 20, 2016 Not really unraid related, but you can add a second 2.5" drive to most laptops. Remove the cd/dvd drive and get a hard drive caddy that fits into the slot. Usually a single screw holds the dvd drive in place, may need to remove the memory/hard drive cover on the bottom of the laptop to access it. On ebay, search for laptop hard drive caddy should bring up some results, be under $10. One thing you have to check is the height of dvd slot, usually 9.5mm or 12.7mm. Works well if you want to use a ssd or something as the main drive and a regular drive for storage. Link to comment
John_M Posted June 23, 2016 Share Posted June 23, 2016 What speed is your laptop's eSATA port? I've used four disks inside an external case with a port multiplier and connected to an HP microserver via a single 6 Gb/s eSATA link and its parity check speed was quite acceptable. It took me a while to find the necessary parts though. The only case I've found to be suitable is the IcyCube from IcyDock. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.