I am currently using a Windows VM with FileZilla to backup my websites and the advantage of using Windows is that it does virus checking of the downloaded files.  I'd like to switch to this Docker, but I don't know how to get virus checking of the downloaded files.  Does it make sense to install a virus checker in the Docker?

 

I have caught a lot of viruses this way and have had to go back and deal with those on the hosted server.  I haven't seen any for months, so GoDaddy may be doing a better job of keeping the viruses off their servers, but I'd still like to scan for viruses myself.

 

EDIT: I installed this Docker and I just use my Windows 10 VM to scan the share for viruses.  Works fine.

Edited December 9, 20178 yr by dlandon

Ok I see.  Do you know any sftp server that you would like to use that is not available on unRAID?  I can look to create a docker container for it.

Thanks for the offer!

Frankly, I haven't a clue what would make for a "good" server software vs a "less good" one.

I'd relied very heavily on the knowledge and generosity of our great community. If someone tells me that the default ftp server in unRAID runs sftp just fine and is quite suitable, I'm more than happy to study up a bit and use that.

If someone knows of something better, I'll head that direction instead.

I'm just a biddy in high weeds most of the time...

Sent from Tapatalk

Is there a way to expand the columns - FIlename, Filesize, etc?  I can't drag them as I would expect.

Dragging column separators should work.  To change the order of the columns, you can right-click on them.

22 minutes ago, Djoss said:

Dragging column separators should work.  To change the order of the columns, you can right-click on them.

That doesn't seem to work for me.  I can't drag them.

Can you try to restart the container to see if it helps?

Working now, but very difficult to choose the place to drag.

On 12/7/2017 at 6:48 AM, dlandon said:

Filezilla has a server version I've used in the past.

I don't think they have a native linux server compiled. I think it would require wine since they only offer the server for windows.

4 hours ago, dlandon said:

Working now, but very difficult to choose the place to drag.

Why?  Because the window is too small?

8 hours ago, Djoss said:

Why?  Because the window is too small?

Not really.  Just a bit hard to find the spot with the mouse that allows the dragging.

Hello i was wondering if there was a way to make the screen bigger so it was not so crampt?

16 hours ago, Nicon4454 said:

Hello i was wondering if there was a way to make the screen bigger so it was not so crampt?

Sure, you can adjust the display height and width in the container settings (under "Show more settings").

 

thank you so much i will try that when i get home.

That worked for me thank you again

Have you perhaps gone to a 32bit version of Filezilla?  I kept getting exec errors trying to install 'latest'.  Then tried v1.7.2 and it was the same.  v1.3.2 would start up but exit within 30 seconds.  v1.3.6 seems to work fine.  

 

I've played around with creating some dockers myself, and the one that always killed me was anything to do with wine.  Because unraid doesn't have 32 bit kernel support, any dockers that use 32bit binaries fail, and it's nigh impossible to create wine with nothing 32bit.  I saw similar errors as with your 1.7.X, that's why I ask.  

This container is not using Wine.  It is using the native Linux version (64bit).

I guess your are talking about the Filezilla server, which is available only for Windows.

By the way, 32bit support has been added to unRAID (since 6.4).

Getting errors all of a sudden.  I've tried reinstalling, removing entirely, removing appdata folder. Not really sure what the error message is referring to. Just takes me to a blank screen with the Filezilla logo and a red x in the top left corner.

 

[services.d] starting services
[services.d] starting s6-fdholderd...
[services.d] starting certsmonitor...
[services.d] starting nginx...
[services.d] starting xvfb...
[nginx] starting...
[certsmonitor] disabling service: secure connection not enabled.
[xvfb] starting...
[services.d] starting logmonitor...
[services.d] starting statusmonitor...
[logmonitor] no file to monitor: disabling service...
[services.d] starting openbox...
[statusmonitor] no file to monitor: disabling service...
[openbox] starting...
[services.d] starting x11vnc...
[services.d] starting app...
[x11vnc] starting...
[app] starting FileZilla...
[services.d] done.
10/08/2018 09:24:08 passing arg to libvncserver: -rfbport
10/08/2018 09:24:08 passing arg to libvncserver: 5900
10/08/2018 09:24:08 passing arg to libvncserver: -rfbportv6
10/08/2018 09:24:08 passing arg to libvncserver: -1
10/08/2018 09:24:08 passing arg to libvncserver: -httpportv6
10/08/2018 09:24:08 passing arg to libvncserver: -1
10/08/2018 09:24:08 passing arg to libvncserver: -desktop
10/08/2018 09:24:08 passing arg to libvncserver: FileZilla
10/08/2018 09:24:08 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 823
10/08/2018 09:24:08 Using X display :0
10/08/2018 09:24:08 rootwin: 0x43 reswin: 0x400001 dpy: 0x58127a00
10/08/2018 09:24:08
10/08/2018 09:24:08 ------------------ USEFUL INFORMATION ------------------
10/08/2018 09:24:08 X DAMAGE available on display, using it for polling hints.
10/08/2018 09:24:08 To disable this behavior use: '-noxdamage'
10/08/2018 09:24:08
10/08/2018 09:24:08 Most compositing window managers like 'compiz' or 'beryl'
10/08/2018 09:24:08 cause X DAMAGE to fail, and so you may not see any screen
10/08/2018 09:24:08 updates via VNC. Either disable 'compiz' (recommended) or
10/08/2018 09:24:08 supply the x11vnc '-noxdamage' command line option.
10/08/2018 09:24:08 X COMPOSITE available on display, using it for window polling.
10/08/2018 09:24:08 To disable this behavior use: '-noxcomposite'
10/08/2018 09:24:08
10/08/2018 09:24:08 Wireframing: -wireframe mode is in effect for window moves.
10/08/2018 09:24:08 If this yields undesired behavior (poor response, painting
10/08/2018 09:24:08 errors, etc) it may be disabled:
10/08/2018 09:24:08 - use '-nowf' to disable wireframing completely.
10/08/2018 09:24:08 - use '-nowcr' to disable the Copy Rectangle after the
10/08/2018 09:24:08 moved window is released in the new position.
10/08/2018 09:24:08 Also see the -help entry for tuning parameters.
10/08/2018 09:24:08 You can press 3 Alt_L's (Left "Alt" key) in a row to
10/08/2018 09:24:08 repaint the screen, also see the -fixscreen option for
10/08/2018 09:24:08 periodic repaints.
10/08/2018 09:24:08 GrabServer control via XTEST.
10/08/2018 09:24:08
10/08/2018 09:24:08 Scroll Detection: -scrollcopyrect mode is in effect to
10/08/2018 09:24:08 use RECORD extension to try to detect scrolling windows
10/08/2018 09:24:08 (induced by either user keystroke or mouse input).
10/08/2018 09:24:08 If this yields undesired behavior (poor response, painting
10/08/2018 09:24:08 errors, etc) it may be disabled via: '-noscr'
10/08/2018 09:24:08 Also see the -help entry for tuning parameters.
10/08/2018 09:24:08 You can press 3 Alt_L's (Left "Alt" key) in a row to
10/08/2018 09:24:08 repaint the screen, also see the -fixscreen option for
10/08/2018 09:24:08 periodic repaints.
10/08/2018 09:24:08
10/08/2018 09:24:08 XKEYBOARD: number of keysyms per keycode 7 is greater
10/08/2018 09:24:08 than 4 and 51 keysyms are mapped above 4.
10/08/2018 09:24:08 Automatically switching to -xkb mode.
10/08/2018 09:24:08 If this makes the key mapping worse you can
10/08/2018 09:24:08 disable it with the "-noxkb" option.
10/08/2018 09:24:08 Also, remember "-remap DEAD" for accenting characters.
10/08/2018 09:24:08
10/08/2018 09:24:08 X FBPM extension not supported.
10/08/2018 09:24:08 X display is not capable of DPMS.
10/08/2018 09:24:08 --------------------------------------------------------
10/08/2018 09:24:08
10/08/2018 09:24:08 Default visual ID: 0x21
10/08/2018 09:24:08 Read initial data from X display into framebuffer.
10/08/2018 09:24:08 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/5120
10/08/2018 09:24:08
10/08/2018 09:24:08 X display :0 is 32bpp depth=24 true color
10/08/2018 09:24:08
10/08/2018 09:24:08 Listening for VNC connections on TCP port 5900
10/08/2018 09:24:08
10/08/2018 09:24:08 Xinerama is present and active (e.g. multi-head).
10/08/2018 09:24:08 Xinerama: number of sub-screens: 1
10/08/2018 09:24:08 Xinerama: no blackouts needed (only one sub-screen)
10/08/2018 09:24:08
10/08/2018 09:24:08 fb read rate: 1898 MB/sec
10/08/2018 09:24:08 fast read: reset -wait ms to: 10
10/08/2018 09:24:08 fast read: reset -defer ms to: 10
10/08/2018 09:24:08 The X server says there are 10 mouse buttons.
10/08/2018 09:24:08 screen setup finished.
10/08/2018 09:24:08

The VNC desktop is: db2665148973:0

0

******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?

The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval. It should work with any VNC viewer. Try it by running:

x11vnc -ncache 10 ...

One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching

Reading locale option from /config/xdg/config/filezilla/filezilla.xml
10/08/2018 09:24:55 Got connection from client 127.0.0.1
10/08/2018 09:24:55 other clients:
10/08/2018 09:24:55 Got 'ws' WebSockets handshake
10/08/2018 09:24:55 Got protocol: binary
10/08/2018 09:24:55 - webSocketsHandshake: using binary/raw encoding
10/08/2018 09:24:55 - WebSockets client version hybi-13
10/08/2018 09:24:55 Disabled X server key autorepeat.
10/08/2018 09:24:55 to force back on run: 'xset r on' (3 times)
10/08/2018 09:24:55 incr accepted_client=1 for 127.0.0.1:56718 sock=10
10/08/2018 09:24:55 webSocketsDecodeHybi: got frame without mask
10/08/2018 09:24:55 rfbProcessClientProtocolVersion: read: I/O error
10/08/2018 09:24:55 client_count: 0
10/08/2018 09:24:55 Restored X server key autorepeat to: 1
10/08/2018 09:24:55 Client 127.0.0.1 gone
10/08/2018 09:24:55 Statistics events Transmit/ RawEquiv ( saved)
10/08/2018 09:24:55 TOTALS : 0 | 0/ 0 ( 0.0%)
10/08/2018 09:24:55 Statistics events Received/ RawEquiv ( saved)
10/08/2018 09:24:55 TOTALS : 0 | 0/ 0 ( 0.0%)

 

 

3 hours ago, Traxxus said:

Getting errors all of a sudden.  I've tried reinstalling, removing entirely, removing appdata folder. Not really sure what the error message is referring to. Just takes me to a blank screen with the Filezilla logo and a red x in the top left corner.

 

 

 

 

 

Can you try to clear your browser's cache?

No go, ctrl-f5 and cleared cache in settings in FF.

Does work in Chrome though, so probably more of a FF/me issue. Thanks.

Edited August 10, 20187 yr by Traxxus

Does anyone have a letsencrypt subdomain.conf file for this container?  My version is coming up with bad gateway,  I am still learning proxies

 

Thanks

Myk

4 minutes ago, MyKroFt said:

Does anyone have a letsencrypt subdomain.conf file for this container?  My version is coming up with bad gateway,  I am still learning proxies

 

Thanks

Myk

 

Did you try this:

https://github.com/jlesage/docker-filezilla/blob/master/README.md#reverse-proxy

4 minutes ago, Djoss said:

 

Did you try this:

https://github.com/jlesage/docker-filezilla/blob/master/README.md#reverse-proxy

 

I will try it again

 

Dont know what to do with [...] in the server section, so I am going to remove it

Edited August 16, 20187 yr by MyKroFt

56 minutes ago, MyKroFt said:

 

I will try it again

 

Dont know what to do with [...] in the server section, so I am going to remove it

 

It’s to show where to include the config block.

Stupid question, but blundering about learning docker:

 

Whereabouts would be best place to store a SSH key? in /config?

9 hours ago, count_duckula said:

Stupid question, but blundering about learning docker:

 

Whereabouts would be best place to store a SSH key? in /config?

 

Yes, I would use /config.