ksignorini Posted September 3, 2018 Share Posted September 3, 2018 (edited) First, my macOS VM boots and I can use the OS at full resolution on my ultra wide monitor. I've passed my GTX 1070 through and am using the matching (build) Nvidia web drivers. I've checked off all the appropriate places in CloverConfig. However, when I boot I can't see Clover. When I was using VNC rather than the passed through GPU, I could see Clover just fine. Now, I can't. I'm thinking it has something to do with Clover's resolution setting, but I've tried changing it to all the common resolutions and some weird ones, and no matter, I can't see Clover on boot. (Luckily it boots past Clover just fine.) Can anyone help me see Clover on boot? Thanks! Edited September 3, 2018 by ksignorini Quote Link to comment
ksignorini Posted September 3, 2018 Author Share Posted September 3, 2018 Oh yeah, I can see the Tiano Core logo (big and stretched). But after that, nothing until the VM's OS runs. Quote Link to comment
1812 Posted September 3, 2018 Share Posted September 3, 2018 19 minutes ago, ksignorini said: Oh yeah, I can see the Tiano Core logo (big and stretched). But after that, nothing until the VM's OS runs. normal behavior when you only have 1 gpu in the system (and sometimes 2) Quote Link to comment
ksignorini Posted September 3, 2018 Author Share Posted September 3, 2018 11 minutes ago, 1812 said: normal behavior when you only have 1 gpu in the system (and sometimes 2) So, you never have to see Clover again? Like, it's not ever necessary? Quote Link to comment
1812 Posted September 3, 2018 Share Posted September 3, 2018 1 hour ago, ksignorini said: So, you never have to see Clover again? Like, it's not ever necessary? Once the vm is working, and you don’t make any crazy hardware changes, pretty much. but if you want to access it again for whatever reason, just boot the vm with vnc instead of the gpu. Quote Link to comment
david279 Posted September 3, 2018 Share Posted September 3, 2018 What version of clover? You should see the clover boot every time. My Mac VM shows it every boot up. I also have a 1070 I pass thru to my VMs.Sent from my SM-G955U using Tapatalk Quote Link to comment
ksignorini Posted September 3, 2018 Author Share Posted September 3, 2018 Latest Clover as of yesterday (don’t have the number with me). Quote Link to comment
david279 Posted September 3, 2018 Share Posted September 3, 2018 Set the correct resolution in the VMs boot menu and see how it goes.Sent from my SM-G955U using Tapatalk Quote Link to comment
ksignorini Posted September 3, 2018 Author Share Posted September 3, 2018 Not sure what you mean? Which boot menu? Quote Link to comment
david279 Posted September 4, 2018 Share Posted September 4, 2018 2 hours ago, ksignorini said: Not sure what you mean? Which boot menu? Tiano core boot menu. I think you hit delete when its booting to get into the menu. Set the correct resolution for your VM there. Quote Link to comment
testdasi Posted September 4, 2018 Share Posted September 4, 2018 Clover always asks me what to boot with (even when I have only 1 partition) so not sure what you meant by seeing nothing from TianoCore to OS boots. Quote Link to comment
1812 Posted September 4, 2018 Share Posted September 4, 2018 7 minutes ago, testdasi said: Clover always asks me what to boot with (even when I have only 1 partition) so not sure what you meant by seeing nothing from TianoCore to OS boots. as mentioned before there are circumstances where, when passing through a gpu you will only see the tianocore logo follwoed by a black screen. Then it won't come up again until the os loads (typically macos) once the gpu drivers have been loaded by the os. this does not occur when using only vnc. it may be able to be solved by injecting graphics drives with clover, but I've never futzed with it. Quote Link to comment
SpaceInvaderOne Posted September 4, 2018 Share Posted September 4, 2018 You can try setting the timeout longer for clover before it auto boots (in the clover configurator ) so its up longer. Maybe try connecting the 1070 to a different port hdmi/displayport etc. you may see it during the boot process then. Quote Link to comment
ksignorini Posted September 5, 2018 Author Share Posted September 5, 2018 18 hours ago, gridrunner said: You can try setting the timeout longer for clover before it auto boots (in the clover configurator ) so its up longer. Maybe try connecting the 1070 to a different port hdmi/displayport etc. you may see it during the boot process then. I'll try with the timeout. My 1070 has only 1 HDMI port, but with some fidgeting I might be able to try the DP ports. Quote Link to comment
ksignorini Posted September 5, 2018 Author Share Posted September 5, 2018 On 9/4/2018 at 6:09 AM, 1812 said: as mentioned before there are circumstances where, when passing through a gpu you will only see the tianocore logo follwoed by a black screen. Then it won't come up again until the os loads (typically macos) once the gpu drivers have been loaded by the os. this does not occur when using only vnc. it may be able to be solved by injecting graphics drives with clover, but I've never futzed with it. This is exactly it. I actually am injecting the Nvidia web drivers, and they work in the OS, but don't affect the boot screen from what I can tell. Quote Link to comment
ksignorini Posted September 5, 2018 Author Share Posted September 5, 2018 On 9/4/2018 at 5:57 AM, testdasi said: Clover always asks me what to boot with (even when I have only 1 partition) so not sure what you meant by seeing nothing from TianoCore to OS boots. I don't see Clover. I see the TitanoCore logo and after a few seconds (maybe 20) the next thing I see is the Apple logo. Quote Link to comment
ksignorini Posted September 5, 2018 Author Share Posted September 5, 2018 On 9/3/2018 at 8:18 PM, david279 said: Tiano core boot menu. I think you hit delete when its booting to get into the menu. Set the correct resolution for your VM there. I've tried Delete, F1, F2, F12, all the other F keys, etc. I'm pretty sure one of them is working because at that point, the TitanoCore logo stays on screen and the booting stops. I figure it's because I actually am in the boot menu, but just can't see it. Quote Link to comment
testdasi Posted September 5, 2018 Share Posted September 5, 2018 3 hours ago, ksignorini said: I've tried Delete, F1, F2, F12, all the other F keys, etc. I'm pretty sure one of them is working because at that point, the TitanoCore logo stays on screen and the booting stops. I figure it's because I actually am in the boot menu, but just can't see it. What you are describing sounds like what happened to me when I forgot to add Ed's custom xml into the template (or when I edited via the form, which removed my custom xml). Quote Link to comment
ksignorini Posted September 5, 2018 Author Share Posted September 5, 2018 2 hours ago, testdasi said: What you are describing sounds like what happened to me when I forgot to add Ed's custom xml into the template (or when I edited via the form, which removed my custom xml). Which lines in Ed's XML? My XML boots my VM and passes through GPU, USB, and other gear. I'm not sure what lines would be the problem. Quote Link to comment
testdasi Posted September 5, 2018 Share Posted September 5, 2018 These: <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-mouse,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='Penryn,vendor=GenuineIntel,kvm=on,+invtsc,vmware-cpuid-freq=on,'/> </qemu:commandline> Quote Link to comment
ksignorini Posted September 5, 2018 Author Share Posted September 5, 2018 Yeah, that stuff's in there. Quote Link to comment
ksignorini Posted September 6, 2018 Author Share Posted September 6, 2018 I ended up having to rebuild my VM for other reasons. This time, I can see Clover! I did everything exactly the same way...to the letter. Oh well, it works now. (I have some other problems though since I'm using a 3440x1440 monitor and the TitanoCore OVMF doesn't support past 2560x1440...) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.