June 8, 20206 yr Author On 5/19/2020 at 3:43 PM, KptnKMan said: Hi there, Hoping that maybe you could make an icon for my original Coolermaster Stacker 810 that I'm still rocking after all this time. 🙂 Thanks! Sorry for the long wait, here's the Stacker; I hope I'll have time for the other requests later in the week.
June 9, 20206 yr 3 hours ago, Mex said: Sorry for the long wait, here's the Stacker; I hope I'll have time for the other requests later in the week. Wow, thanks @Mex!
June 9, 20206 yr 13 hours ago, Mex said: I hope I'll have time for the other requests later in the week. Looking forward for it. But don't hurry. I have time. Edited June 9, 20206 yr by derfalle
June 18, 20206 yr ENTHOO EVOLV ATX GLASS Please! http://www.phanteks.com/Enthoo-Evolv-ATX-TemperedGlass.html
June 20, 20206 yr On 5/30/2020 at 3:49 PM, derfalle said: Hey, I would love to have icons for my two systems INTER-TECH 2U 2404L INTER-TECH 4U 4408 I would also like the Inter-Tech 4U 4408, although in the US it is the NORCO RPC-4308.
June 24, 20206 yr Author Here you go! On 5/30/2020 at 9:49 PM, derfalle said: Hey, I would love to have icons for my two systems INTER-TECH 2U 2404L INTER-TECH 4U 4408 On 6/8/2020 at 4:22 AM, dudeedoo said: This is really impressive work you've been doing for everyone. It's really worthwhile. 'm surprised no one's asked for a Dell Poweredge T110 ii yet. If you could do one that would be amazing! Thank you for all the cool icons! Dell Poweredge T110 ii
June 24, 20206 yr Author On 6/16/2020 at 6:43 PM, DMills said: Hoping you can make one for the Cooler Master Cosmos II? Went all fill on this one, hope it fits the bill! On 6/18/2020 at 6:07 PM, xorz57 said: ENTHOO EVOLV ATX GLASS Please! http://www.phanteks.com/Enthoo-Evolv-ATX-TemperedGlass.html Sure thing!
June 24, 20206 yr 22 minutes ago, Mex said: Went all fill on this one, hope it fits the bill! Perfect, thank you so much!!
June 25, 20206 yr Would it be possible to get an icon for those of us that run open test bench PCs with UnRAID? Something like the Streacom BC-1 would be cool to have (I'll leave the positioning open to your interpretation)! Thanks! Edited June 25, 20206 yr by Samjam927
June 26, 20206 yr On 6/24/2020 at 5:14 PM, Mex said: Here you go! Amazing work - THANK YOU! You're talented and generous with your time and efforts.
July 8, 20205 yr These are really cool! I've held onto a Cooler Master HAF932 for many years and finally putting it back in service Would love to have an icon for it I have the original with the 6 mesh blanking plates for the 5.25 bays but couldn't find a good face on picture, from reading it looks like the 932 advanced was the same case but with the one of the blanking plates as USB3 interface but the rest is the same. If possible I would like it with 6 blanking plates like the original model. Thanks
August 3, 20205 yr So I run my server in a Cooler Master HAF XB EVO and it'd be great to get one of these custom icons for it. Spectacular work on the ones you've made already, you've got some great design chops! Front view of it:
August 12, 20205 yr Author On 6/25/2020 at 11:15 PM, Samjam927 said: Would it be possible to get an icon for those of us that run open test bench PCs with UnRAID? Something like the Streacom BC-1 would be cool to have (I'll leave the positioning open to your interpretation)! Thanks! I went with the easiest position
August 12, 20205 yr Author On 7/3/2020 at 4:41 AM, BlueFang said: How about a Lenovo ideacentre D400. Thanks Tricky pattern! I hope this works!
August 12, 20205 yr Author On 7/8/2020 at 1:58 PM, SuudoXR said: These are really cool! I've held onto a Cooler Master HAF932 for many years and finally putting it back in service Would love to have an icon for it I have the original with the 6 mesh blanking plates for the 5.25 bays but couldn't find a good face on picture, from reading it looks like the 932 advanced was the same case but with the one of the blanking plates as USB3 interface but the rest is the same. If possible I would like it with 6 blanking plates like the original model. Thanks Had to simplify a lot of the mesh detailing, but given the display size I hope it works out Edit: totally missed the part about just having 6 blanking palates, updated! Edited August 12, 20205 yr by Mex
August 13, 20205 yr 2 hours ago, Mex said: Tricky pattern! I hope this works! Very nice! I love it, thanks.
August 13, 20205 yr 7 hours ago, Mex said: I went with the easiest position That's Awesome! Thank you!
August 13, 20205 yr 20 hours ago, Mex said: Had to simplify a lot of the mesh detailing, but given the display size I hope it works out Edit: totally missed the part about just having 6 blanking palates, updated! Oh that's awesome!! Thank you so much sir
August 14, 20205 yr On 1/27/2020 at 2:54 AM, Mex said: Somehow I totally missed this reply until now. So sorry and thanks a lot! You're the best!
August 15, 20205 yr Author On 8/3/2020 at 8:02 PM, untraceablez said: So I run my server in a Cooler Master HAF XB EVO and it'd be great to get one of these custom icons for it. Spectacular work on the ones you've made already, you've got some great design chops! Front view of it: Thanks for your kind words! Here is the HAF XB EVO: Edited August 15, 20205 yr by Mex
August 15, 20205 yr Author A little late to the "let's hack Unraid on to the Raspberry Pi" party, but I just thought it would be fun to make an icon for it. Edited August 15, 20205 yr by Mex
August 16, 20205 yr Fantastic work, really nice of you to do this for the community! Could you add the HP ProLiant DL380 G7? There's the 8 bay SFF model, a 16 port bay model (which I have) and a 6 bay LFF model
August 17, 20205 yr Hello! Big fan of the case icons you've made. Was hoping you would be able to make an icon of either the Cooler Master Q300L or Q500L. Thanks in advance.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.