Console stoping at Inetd


dgaschk

9 posts in this topic Last Reply

Recommended Posts

33 minutes ago, dgaschk said:

I am booting UEFI.  BIOS is set to EFI only. 

OK,  I must have missed that.  What about booting in GUI Mode?  In another thread it was reported that only GUI mode worked for that user.  The rest hung at /bzroot

 

That's not a long-term solution, but, it may help narrow down a cause if GUI mode works.

Link to post

Default hangs at "Loading /bzroot . . .ok"

GUI Mode hangs at "Loading /bzroot-gui . . .ok"

Safe Mode hangs at "Loading /bzroot . . .ok"

GUI Safe Mode mode hangs at "Loading /bzroot-gui . . .ok"

Memtest86+ doesn't work either. It just reboots.

Link to post
14 hours ago, dgaschk said:

Default hangs at "Loading /bzroot . . .ok"

GUI Mode hangs at "Loading /bzroot-gui . . .ok"

Safe Mode hangs at "Loading /bzroot . . .ok"

GUI Safe Mode mode hangs at "Loading /bzroot-gui . . .ok"

Memtest86+ doesn't work either. It just reboots.

When I had the same problem (although I could boot in GUI mode), I posted about it in the thread linked below.  Others had the same issue.  As it turns out, most of us had the same motherboard (an ASRock C236 WSI) and, although you have a SuperMicro board, perhaps there is something in this thread that will be helpful.  When I changed over to UEFI boot mode, If anything other than the {flash drive name}:UEFI was specified in the boot order, the board would hang  at loading /bzroot...OK.  We had to set all other boot priority options to 'disabled' and, perhaps make some other BIOS tweaks.

 

 

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.