peter76 Posted November 14, 2020 Share Posted November 14, 2020 today I installed Unraid Version: 6.9.0-beta35 and I can tell you: my USB-2,5GBit NIC with RTL8156 Chipset is running now. Speedtest: Win-VM copy over network at 260MB/s - seems to be running on fullspeed 🙂 ** yeah ** 1 Quote Link to comment
ParHelia Posted November 14, 2020 Share Posted November 14, 2020 Hi, Working for me too 🙂 1 Quote Link to comment
HondSchaap Posted November 17, 2020 Author Share Posted November 17, 2020 Yes!! Can confirm as well, the new beta recognises the RTL8156 NIC perfectly. @limetech Thanks so much for the effort you put into this! Very much appreciated. Quote Link to comment
snifex Posted November 19, 2020 Share Posted November 19, 2020 Greatly appreciated after unsuccessfully trying the qnap 5 Gbit. Only issue that I had was the 2.5gbit link going down in unraid (switch showing that is up). After re-doing my network setup, removing the network cfg and network rules from the usb, I have now full 2.5gbit using the active backup bonding mode together with my 1gbit Mainboard network. Let's hope that stays after the reboot Quote Link to comment
eric sun Posted January 12, 2021 Share Posted January 12, 2021 Same for me and also thanks for analyzing thanks for everbody! Quote Link to comment
Junru Zhong Posted March 31, 2022 Share Posted March 31, 2022 (edited) Hi, everyone, I am running UNRAID 6.9.2 on an HPE MicroServer Gen10 Plus. I have a USB 2.5GbE from asustor with an RTL8156 chipset. When I plug the NIC into the server, it recognizes it as a USB NIC (visible on the network setting page), but it is in a "shutdown (inactive)" state. I tried to bring it up from WebUI and ifconfig, it shows a state UP, but I can't get an IP address from my router (cable plugged in). The NIC is working both on Windows and the latest TrueNAS SCALE 22.02 (kernel version is 5.14, I think). Does anyone have any clue about this situation? Should I wait for 6.10 to release (it should have a newer kernel)? I attached my diagnostics here. Thank you for answering my question! mircoserver-diagnostics-20220331-0922.zip Edited March 31, 2022 by Junru Zhong Fix typos and grammar Quote Link to comment
ich777 Posted March 31, 2022 Share Posted March 31, 2022 3 hours ago, Junru Zhong said: Should I wait for 6.10 to release (it should have a newer kernel)? From my perspective you can safely upgrade to 6.10.0-rc4, data loss is very uncommon even on the RC versions. Please keep in mind that RC versions, at least in the case for Unraid, are tested really really really well and only have sometimes minor issues (rc4 has a UI bug that highlights a bit too much in the WebUI). Also don't forget that you can always go back to 6.9.2 if something isn't working for you. Quote Link to comment
Junru Zhong Posted April 1, 2022 Share Posted April 1, 2022 21 hours ago, ich777 said: From my perspective you can safely upgrade to 6.10.0-rc4, data loss is very uncommon even on the RC versions. Please keep in mind that RC versions, at least in the case for Unraid, are tested really really really well and only have sometimes minor issues (rc4 has a UI bug that highlights a bit too much in the WebUI). Also don't forget that you can always go back to 6.9.2 if something isn't working for you. Hi ich777 Thanks for the reply! I upgrade to 6.10.0-rc4 with no issue, but the USB NIC is not recognized by OS this time Previously on 6.9.2, I can see the the NIC shows up in boot up log. Those lines start with "r8152". And an ethernet device is shown on network settings as well as `ifconfig`. Now I am at 6.10, I can't find a Realtek NIC device registered from the start up log, nither ethernet device in the system. I prefer to stay at 6.10. Can anyone help to find out a solution? My diagnostics and syslog are attached below. Thank you very much! mircoserver-diagnostics-20220401-1113.zip mircoserver-syslog-20220401-0313.zip 1 Quote Link to comment
SimonF Posted April 3, 2022 Share Posted April 3, 2022 (edited) On 4/1/2022 at 4:21 AM, Junru Zhong said: Hi ich777 Thanks for the reply! I upgrade to 6.10.0-rc4 with no issue, but the USB NIC is not recognized by OS this time Previously on 6.9.2, I can see the the NIC shows up in boot up log. Those lines start with "r8152". And an ethernet device is shown on network settings as well as `ifconfig`. Now I am at 6.10, I can't find a Realtek NIC device registered from the start up log, nither ethernet device in the system. I prefer to stay at 6.10. Can anyone help to find out a solution? My diagnostics and syslog are attached below. Thank you very much! mircoserver-diagnostics-20220401-1113.zip 84.26 kB · 3 downloads mircoserver-syslog-20220401-0313.zip 25.43 kB · 0 downloads Looks like the usb NIC you have needs and is not included in RC4 @limetech can this be added if not already requested? https://linux-hardware.org/index.php?id=usb:0bda-8156 cat .config | grep CONFIG_USB_RTL8152 # CONFIG_USB_RTL8152 is not set Edited April 3, 2022 by SimonF 1 Quote Link to comment
ich777 Posted April 4, 2022 Share Posted April 4, 2022 20 hours ago, SimonF said: Looks like the usb NIC you have needs and is not included in RC4 @limetech can this be added if not already requested? https://linux-hardware.org/index.php?id=usb:0bda-8156 cat .config | grep CONFIG_USB_RTL8152 # CONFIG_USB_RTL8152 is not set This is covered by the OOT driver but I've already requested the in tree driver for the next Unraid version. I'm not too sure if there are still speed issues with the in tree driver. 12 hours ago, Uncle09 said: Same with my RTL 8156. This chipset is also covered by the in tree driver. If someone is able to test a custom bzmodules for RC4 feel free to contact me and I will create one to test if there are still speed issues. @Junru Zhong is currently doing a backup task that will take a few days and is because of this not able to test it.. 1 Quote Link to comment
Junru Zhong Posted April 4, 2022 Share Posted April 4, 2022 5 hours ago, ich777 said: This is covered by the OOT driver but I've already requested the in tree driver for the next Unraid version. I'm not too sure if there are still speed issues with the in tree driver. This chipset is also covered by the in tree driver. If someone is able to test a custom bzmodules for RC4 feel free to contact me and I will create one to test if there are still speed issues. @Junru Zhong is currently doing a backup task that will take a few days and is because of this not able to test it.. I have only one 2.5GbE NIC and my router have one 2.5GbE port only (an upgrade is planned). Maybe my configuration is not suitable for a speed test. It will be better if someone else has multiple 2.5 GbE devices and/or a switch can help. 1 Quote Link to comment
Grobalt Posted April 7, 2022 Share Posted April 7, 2022 I upgraded from RC2 to RC4 and network went corrupt. Downgrade to RC2 the problem stayed. So i created new usb sticks with demo version and startet with 6.9.2 -> RC2 -> RC4. Confirmed, with RC4 the USB 2.5gbit NIC is no more recognized. RTL8156B Realtek Semiconductor Corp. USB 10/100/1G/2.5G LAN Quote Link to comment
mwpmo Posted May 7, 2022 Share Posted May 7, 2022 I was a happy user of RTL8156 2.5Gb USB NIC (with around 280MB/s connection). However, since I upgraded to 6.10 rc3, unRAID cannot recognize it anymore and I have to switch back to slow on-board 1Gb NIC and the connection speed was decrease to around 120MB/s.. People here said the driver for RTL8156 were removed since rc3 and has already request limetech to add it back. So I wait and try rc4, rc5 and now rc7, the driver is still missing in the build. May I know why not to do so? And please put it back in future build. Quote Link to comment
Junru Zhong Posted May 7, 2022 Share Posted May 7, 2022 1 hour ago, mwpmo said: I was a happy user of RTL8156 2.5Gb USB NIC (with around 280MB/s connection). However, since I upgraded to 6.10 rc3, unRAID cannot recognize it anymore and I have to switch back to slow on-board 1Gb NIC and the connection speed was decrease to around 120MB/s.. People here said the driver for RTL8156 were removed since rc3 and has already request limetech to add it back. So I wait and try rc4, rc5 and now rc7, the driver is still missing in the build. May I know why not to do so? And please put it back in future build. I was keep watching this issue for a while. I was upgrade from 6.9.2 to 6.10.0rc4, but the driver is not included in rc4. I noticed from the rc5 changelog, r8152 driver was added back to rc5, but the NIC still can't recoganized by unRAID. *RTL8156B uses r8152 driver. Quote Link to comment
mwpmo Posted May 12, 2022 Share Posted May 12, 2022 Just updated to rc8. My RTL8156 2.5Gb USB NIC is still not working in rc8 ☹️ Quote Link to comment
mwpmo Posted May 18, 2022 Share Posted May 18, 2022 Just updated to 6.10.0 release. My RTL8156 2.5Gb USB NIC is still not working ☹️😔 Quote Link to comment
decibelio99 Posted May 18, 2022 Share Posted May 18, 2022 Mine neither, but from the rc-7. The board detects it(RTL8156), but the system does not load the driver. However, the RTL 8125(ethernet) works fine. Quote Link to comment
tezzlicious Posted May 19, 2022 Share Posted May 19, 2022 Same here. The Unraid team is aware of the issue now. Rolled back to 6.9 for now on their advice. Hopefully it will get fixed soon so we can all enjoy 6.10. Quote Link to comment
mwpmo Posted May 19, 2022 Share Posted May 19, 2022 (edited) Good to know that they will finally fix it. 👍 Cause the problem was already reported six months ago (since 6.10 rc3). Don't know why they take so long to fix it 😑 Edited May 19, 2022 by mwpmo Quote Link to comment
limetech Posted May 19, 2022 Share Posted May 19, 2022 The r8152 driver was included in the kernel build for 6.10.0-rc5 released on April 26. Please upgrade to 6.10 stable release and if still not working, please open a Bug Report here: https://forums.unraid.net/bug-reports/stable-releases/ also please include diagnostics.zip. On 6.10.0 you can see the driver in this directory: /lib/modules/5.15.40-Unraid/kernel/drivers/net/usb/ Quote Link to comment
mwpmo Posted May 19, 2022 Share Posted May 19, 2022 (edited) Thanks a lot for your quick reply. Just submitted a bug report on this. Edited May 20, 2022 by mwpmo Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.