JorgeB Posted June 28, 2021 Share Posted June 28, 2021 Does it get better if you stop all writing to disk8? Dashboard CPU usage will show i/o load. Quote Link to comment
FreeMan Posted June 28, 2021 Author Share Posted June 28, 2021 6 minutes ago, JorgeB said: Does it get better if you stop all writing to disk8? Dashboard CPU usage will show i/o load. At the time, there was nothing that I'm aware of that was writing to Disk8. I had a file downloading, but that had completed before I witnessed the CPU pinned for a minute or two. Unless, of course, it was caching at the server or drive level and the download had completed but it wasn't finished actually writing to disk. As related to the other issue I posted (that you addressed a couple of hours ago), I think I'm going to swap my new 8TB drive for the current disk8, just to get it out of the mix and see what happens. If all goes well in that scenario, I might consider adding this current disk8 back into the array, moving the contents of the 2, quite old, 4TB drives to it (controlled moves overnight where there should be nothing else going on) and excluding this particular drive from all shares to prevent additional writes from going to it. Or, I may just bite the bullet, pick up another non-SMR drive, and replace the two 4TBs with that. Quote Link to comment
outrigger999 Posted March 6, 2022 Share Posted March 6, 2022 Has this issue been resolved? I have a similar situation where I don't have 100% utilization but it's like 80%Q for no reason. If I do a reboot, then it calms down so it's like something goes out of control over time. I've eliminated anything that I wasn't using plugin wise and all my docker apps are turned off right now except one. Very strange behavior for which top and htop are not help. What was the issue here? Thanks. Quote Link to comment
Squid Posted March 6, 2022 Share Posted March 6, 2022 Without diagnostics, there's not much anyone can do to answer. If top / htop don't show the processes running using the CPU, then it's going to be an I/O Wait (which htop does show). The dashboard takes into consideration IO wait on its graphs. NetData app is also a great tool for diagnosing stuff Quote Link to comment
DesertCookie Posted December 9, 2022 Share Posted December 9, 2022 Has been interesting reading this. I've not been able to solve a similar issue that causes my 11600K to be utilized to around 70% while basically doing nothing, causing write speed and web UI speed to drop. Hope this somehow gets resolved for you. Quote Link to comment
Ed1k Posted June 17 Share Posted June 17 Hello, I have same situation. Nothing runs but cpu load goes to 100% while freezing everything. htop doesnt give any clue about the source of this problem. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.