Dyon Posted September 13, 2020 Author Share Posted September 13, 2020 @microbassIf you update the container, the issue should be fixed Quote Link to comment
microbass Posted September 14, 2020 Share Posted September 14, 2020 On 9/13/2020 at 1:02 AM, Dyon said: @microbassIf you update the container, the issue should be fixed Thank you so much for the help. Quote Link to comment
Mattti1912 Posted September 25, 2020 Share Posted September 25, 2020 Hello i´ve tried to install this plugin. But when i enable vpn and wireguard. It wont open?? i ´ve copied the .conf file to the wireguard directory. But with no luck What am i doing wrong?? Am i suppose to install wireguard, some way else?? regards Quote Link to comment
Dyon Posted September 26, 2020 Author Share Posted September 26, 2020 2 hours ago, Mattti1912 said: Hello i´ve tried to install this plugin. But when i enable vpn and wireguard. It wont open?? i ´ve copied the .conf file to the wireguard directory. But with no luck What am i doing wrong?? Am i suppose to install wireguard, some way else?? regards What doesn't work exactly? Opening the WebUI? Are you using a bridge network? Can you post the log? Quote Link to comment
Mattti1912 Posted September 26, 2020 Share Posted September 26, 2020 (edited) Hello again. The thing is that im only able to acces the webui, when i turn off vpn. And yes im using bridge network. regards LOG Edited September 26, 2020 by Mattti1912 Quote Link to comment
Dyon Posted September 26, 2020 Author Share Posted September 26, 2020 12 minutes ago, Mattti1912 said: Hello again. The thing is that im only able to acces the webui, when i turn off vpn. And yes im using bridge network. regards LOG 6.13 kB · 0 downloads The log says the following: 2020-09-26 16:10:01.325265 [ERROR] WireGuard config filename is not 'wg0.conf' 2020-09-26 16:10:01.342769 [ERROR] Rename /config/wireguard/Europe-NL1.conf to 'wg0.conf' Please rename the file Europe-NL1.conf to wg0.conf and restart the container Quote Link to comment
Mattti1912 Posted September 26, 2020 Share Posted September 26, 2020 Thank you for reply. But it still not working?? regards Quote Link to comment
Dyon Posted September 26, 2020 Author Share Posted September 26, 2020 Just now, Mattti1912 said: Thank you for reply. But it still not working?? regards Can you send a new log? Quote Link to comment
Mattti1912 Posted September 26, 2020 Share Posted September 26, 2020 yes sorry.. LOG Quote Link to comment
Dyon Posted September 26, 2020 Author Share Posted September 26, 2020 Alright, WireGuard seems to be working now, but after qBittorrent starts it seems to crash, which is weird since it's kinda the 2nd last action of the start up script, after that it should keep on checking the connection. Because of this I think qBittorrent might have a corrupted config file. Can you stop the container, and delete `appdata/qbittorrentvpn/qBittorrent/config/qBittorrent.conf` After that, if it still does not work, could you send `appdata/qbittorrentvpn/qBittorrent/data/logs/qbittorrent.log` Warning: This file MIGHT contain sensitive information about your IP (mainly the lines with the text 'Detected external IP:') or the torrent loaded in qBittorrent, so please be careful whens ending this over. Quote Link to comment
Mattti1912 Posted September 26, 2020 Share Posted September 26, 2020 Thank you. Here is the log.. regards qbittorrent log.txt Quote Link to comment
Dyon Posted September 26, 2020 Author Share Posted September 26, 2020 I do not see anything wrong in the qbittorrent.log.txt or in the Container log. Does the container keep restarting continuously and you are not able to connect to the Web UI? Is the IP correct that you try to access the container on, also note https:// Just to be sure everything is clean: Stop the container Delete the appdata/qbittorrentvpn/qBittorrent folder (so it will do a full clean config and https install of qBittorrent) Check if the LAN_NETWORK is correct for your IP-range - Try again If it still does not work: Stop the container Delete the appdata/qbittorrentvpn/qBittorrent folder (so it will do a full clean config and https install of qBittorrent) Check if the LAN_NETWORK is correct for your IP-range Edit the container again, click 'show more settings...' and set ENABLE_SSL to no - Try again Quote Link to comment
Mattti1912 Posted September 26, 2020 Share Posted September 26, 2020 Hello again, and thank you It didnt work, the thing is that i can access the qbittorrent webgui. When im not using vpn.. Dont know if that helps?? regards Quote Link to comment
Mattti1912 Posted September 26, 2020 Share Posted September 26, 2020 Hello again My configuration is this regards wireguard.docx Quote Link to comment
Dyon Posted September 26, 2020 Author Share Posted September 26, 2020 @Mattti1912 I sorry, I would love to help you, but I do not see anything wrong with the log files or the configurations. From looking at the log files and you configuration it should be possible to connect to qBittorrent's webui without problems. Quote Link to comment
Mattti1912 Posted September 26, 2020 Share Posted September 26, 2020 (edited) Hello again and thank you for your help Is there anything i can do? delete something?? re-install something?? Do i have to install the Dynamix WireGuard ?? Thank you Edited September 26, 2020 by Mattti1912 Quote Link to comment
Dyon Posted September 27, 2020 Author Share Posted September 27, 2020 1 hour ago, Mattti1912 said: Hello again and thank you for your help Is there anything i can do? delete something?? re-install something?? Do i have to install the Dynamix WireGuard ?? Thank you Nope. Normally you just install the Docker, set the settings. Add the WireGuard config to the WireGuard folder, with renaming the config 'wg0.conf'. After that you just click the 'WebUI' button in Unraid and you should have a working qBittorrent routed through the WireGuard VPN of your VPN Provider. Quote Link to comment
Cliff Posted October 2, 2020 Share Posted October 2, 2020 I am the only one who get the status "stalled" on all downloads ? Most often torrents starts of att full speed then after a minute or so torrents get stalled and all network activity halts. after a few minutes all torrents start again. And then it continues in the same way stalled/downloading. I have been using rutorrent before and have never had this problem. I have 10TB free space, 1000/1000 Mbit/s connection and all torrents have lots of seeds/pers What can cause this problem ? Quote Link to comment
Dyon Posted October 2, 2020 Author Share Posted October 2, 2020 9 hours ago, Cliff said: I am the only one who get the status "stalled" on all downloads ? Most often torrents starts of att full speed then after a minute or so torrents get stalled and all network activity halts. after a few minutes all torrents start again. And then it continues in the same way stalled/downloading. I have been using rutorrent before and have never had this problem. I have 10TB free space, 1000/1000 Mbit/s connection and all torrents have lots of seeds/pers What can cause this problem ? I think this may be related to qBittorrent's settings. Please open the qBittorrent options > BitTorrent > Uncheck Torrent Queueing Also check if the Connections Limits are set properly in the Connection tab, you could increase, double or triple those maybe, or just disable all connections by unchecking it all. Also please verify what qBittorrents connection status is at the bottom like how many DHT nodes you are connected with and if the connection status is green, Quote Link to comment
RinkyDinkBear Posted October 5, 2020 Share Posted October 5, 2020 Just wanted to say thanks. Earlier in the year I wasted two weeks figuring out how to route containers through wireguard/ rewrite compose files etc. I got this up and running with wireguard in 2 minutes. 1 Quote Link to comment
live4ever Posted October 6, 2020 Share Posted October 6, 2020 I can't seem to get the ADDITIONAL_PORTS variable to work. Tried with Telly port 6077 and ChannelsDVR port 8089 Neither of these are accessible at unRAID.lan.ip:6077 or 8089 Quote Link to comment
Dyon Posted October 6, 2020 Author Share Posted October 6, 2020 (edited) 47 minutes ago, live4ever said: I can't seem to get the ADDITIONAL_PORTS variable to work. Tried with Telly port 6077 and ChannelsDVR port 8089 Neither of these are accessible at unRAID.lan.ip:6077 or 8089 Odd, I will look at it in a moment. Does the log of qbittorrentvpn show that the ports got added to the IP tables? Edit: I've just tested this with a nginx webserver (linuxserver/nginx), and it works perfectly fine for me. On the additional dockers, you don't need to change anything about the ports, but only need to know which, so 6077 and 8089. In the qbittorrentvpn Docker, you need to add those as '6077,8089' and also add port mappings. At the bottom of the 'edit' of the qbittorrentvpn Docker select 'Add another Part, Port, Variable, Label or Device' Set the following: Config Type: Port Name: ChannelsDVR Container Port: 8089 Host Port: 8797 (example, change this to the port you like to use, 8089 would also be possible) Connection Type: TCP (doubt you need TCP) Click add, and apply. Also, don't forget to add the '--net=container:qbittorrentvpn' to the other containers. Please check if you did all the steps of this video correctly: Edited October 6, 2020 by Dyon Quote Link to comment
b3lc Posted October 29, 2020 Share Posted October 29, 2020 Hello, First and foremost, thanks for this container. It has been great. So great that.. it is so cutting edge that is currently using qBittorrent v4.3.0, which not all sites whitelist just yet. Would it be possible to retain an older version, perhaps as a tag in the container DockerHub? Quote Link to comment
Dyon Posted October 29, 2020 Author Share Posted October 29, 2020 1 minute ago, b3lc said: Hello, First and foremost, thanks for this container. It has been great. So great that.. it is so cutting edge that is currently using qBittorrent v4.3.0, which not all sites whitelist just yet. Would it be possible to retain an older version, perhaps as a tag in the container DockerHub? In my opinion a new official release version is not cutting edge, it has been in development for months by the qBittorrent team. I will add a tag for the latest 4.2.x version later. I'll reply to you again later to you know when it's added. I also encourage you to contact your trackers to add to support for qBittorrent 4.3.x 1 Quote Link to comment
Dyon Posted October 29, 2020 Author Share Posted October 29, 2020 1 hour ago, b3lc said: Hello, First and foremost, thanks for this container. It has been great. So great that.. it is so cutting edge that is currently using qBittorrent v4.3.0, which not all sites whitelist just yet. Would it be possible to retain an older version, perhaps as a tag in the container DockerHub? The 4.2.5 tag is now online. In Unraid, select my container, select Edit, and change the 'Repository' from 'dyonr/qbittorrentvpn' to 'dyonr/qbittorrentvpn:v4_2_x' 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.