tmchow Posted August 2, 2023 Author Share Posted August 2, 2023 2 hours ago, Qwent said: According to the official migration guide from n8n, the webhook tunnel variable should be `WEBHOOK_URL`. Am I missing something? You’re not missing anything. Mistake on my part. I’ve patched the app. Quote Link to comment
J OBrien Posted August 2, 2023 Share Posted August 2, 2023 (edited) I can confirm its working now after 2 changes on the template: -Change webhook variable to WEBHOOK_URL -Change PATH of config from /root/.n8n to /home/node/.n8n Thank you for the fix. Edited August 2, 2023 by J OBrien 1 Quote Link to comment
frankie666 Posted August 4, 2023 Share Posted August 4, 2023 Hi, tried to install the n8n container but it does not start properly. The log windows just popup and close. I was able to catch it with a screen record. Below the screen shot. Any idea of the problem ? Thanks for help. Quote Link to comment
RichardU Posted August 8, 2023 Share Posted August 8, 2023 (edited) I have n8n installed on my unRaid server A and just tried installing it on my unRaid server B. When trying to copy over the settings, I noticed that the new installation wasn't asking for: Basic Auth, Basic Auth Username, and Basic Auth Password. Am I supposed to add those manually? When I install without those, I get the same error as frankie666. For fun, I added those variables manually and got the same error. You can see the error clearly if you check the logs quickly after starting. If you wait long enough the errors time out and the logs only flash what frankie666 showed. Edited August 8, 2023 by RichardU Quote Link to comment
tmchow Posted August 8, 2023 Author Share Posted August 8, 2023 4 minutes ago, RichardU said: I have n8n installed on my unRaid server A and just tried installing it on my unRaid server B. When trying to copy over the settings, I noticed that the new installation wasn't asking for: Basic Auth, Basic Auth Username, and Basic Auth Password. Am I supposed to add those manually? When I install without those, I get the same error as frankie666. Basic auth isn’t supported anymore so those aren’t needed. As for the error it looks like a permission issue. Make sure the directory and file are accessible by the n8n user Quote Link to comment
ajmaradiaga Posted August 17, 2023 Share Posted August 17, 2023 (edited) On 8/4/2023 at 6:18 AM, frankie666 said: Hi, tried to install the n8n container but it does not start properly. The log windows just popup and close. I was able to catch it with a screen record. Below the screen shot. Any idea of the problem ? Thanks for help. The problem is that the user running the container (node) is unable to write to your app folder. To fix it, set the user id and group id of that folder to 1000:1000. You can run the command below from the Unraid server terminal. chown 1000:1000 /mnt/cache/appdata/n8n Hope this helps! Edited August 17, 2023 by ajmaradiaga Added additional instructions Quote Link to comment
T4ser Posted October 28, 2023 Share Posted October 28, 2023 Hello, would it be possible to update N8N to the latest version? I use a community made rss trigger and since they made the update it broke all my services. Their official site says the problems will be solved with the latest update. Thank you very much for n8n. Peace. Quote Link to comment
tmchow Posted October 28, 2023 Author Share Posted October 28, 2023 5 hours ago, T4ser said: Hello, would it be possible to update N8N to the latest version? I use a community made rss trigger and since they made the update it broke all my services. Their official site says the problems will be solved with the latest update. Thank you very much for n8n. Peace. what’s not working with this template that you can’t update to the latest version? Quote Link to comment
Eurotimmy Posted January 17 Share Posted January 17 On 8/18/2023 at 7:30 AM, ajmaradiaga said: chown 1000:1000 /mnt/cache/appdata/n8n This did it for me, thank you @ajmaradiaga The rest of the template is fine other than this. Hey @tmchow, thank you for the template. Could you please consider an update to include the above `chown` command in the template XML <Description> Cheers Quote Link to comment
rayray14 Posted March 6 Share Posted March 6 Good morning, I installed the container from CA, had the same issues as above, but the chown command worked and got me to the user setup page. Unfortunately, I get the following error: I appreciate any help! Quote Link to comment
tmchow Posted March 7 Author Share Posted March 7 @Eurotimmy I've updated the xml file to add the chown directions to avoid the permissions error. It should be picked up by CA within a few hours on the next refresh cycle. 1 Quote Link to comment
SakabaRihiro Posted March 7 Share Posted March 7 (edited) When I log into my container (been using it for a couple of years now, and did the migration a year ago when it was needed) I now receive the following screen (note I did the chown command noted above): Navigating to Settings presents the following error The personal page loads, and I tried to change my password but also get a 401. Edited March 7 by SakabaRihiro Quote Link to comment
SakabaRihiro Posted March 7 Share Posted March 7 19 hours ago, rayray14 said: Good morning, I installed the container from CA, had the same issues as above, but the chown command worked and got me to the user setup page. Unfortunately, I get the following error: I appreciate any help! Fixed my issue below by changing to 1.29.1 per https://community.n8n.io/t/not-able-to-login-to-either-docker-or-npm-version-of-n8n-via-local-network/42120/2 Might work for you as well. Looks like there's a bug with the n8n docker that affects Unraid. 1 Quote Link to comment
rayray14 Posted March 7 Share Posted March 7 55 minutes ago, SakabaRihiro said: Fixed my issue below by changing to 1.29.1 per https://community.n8n.io/t/not-able-to-login-to-either-docker-or-npm-version-of-n8n-via-local-network/42120/2 Might work for you as well. Looks like there's a bug with the n8n docker that affects Unraid. Revering back to 1.29.1 fixed it for me as well. Thanks! 2 Quote Link to comment
gregzee Posted March 19 Share Posted March 19 When i log into my fresh install I get an init and unauthorized error on the GUI. I ran the chown command. Still get that error. Quote Link to comment
rayray14 Posted March 19 Share Posted March 19 13 hours ago, gregzee said: When i log into my fresh install I get an init and unauthorized error on the GUI. I ran the chown command. Still get that error. I had the same issues. I had to force a version when configuring my repostory. I'm watching the repo and will just use the latest once I've seen references to it being addressed: Quote Link to comment
RichardU Posted March 29 Share Posted March 29 FYI, I am completely unable to get this running on a fresh install of unRaid 6.12.8. The WebUI gives me: This site can’t be reached I have tried various combinations of: Repository: n8nio/n8n:1.29.1 environment variable N8N_SECURE_COOKIE: false N8N_EDITOR_BASE_URL: various changing the owner of appdata/n8n Suggestions are welcomed. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.