giganode

Hey! I added support for HX1500i on 13th November 2023. You should be good to go. @Reptar reported, that his psu works. Did you apply settings via the settings page? If not, please do and try again. For manual testing open a terminal and type in corsairmi If you receive an output with actual data everything is fine.

Please try the following: 1. Use DDU to completely wipe everything relatet to intels gpu driver in your vm and shut it down. 2. Do a full shutdown of your server so a vgpu has not been initialized incorrectly prior to driver installation. 3. Install intels gpu driver on next vm boot.

Yes I would still like to add support for 1600i.. Ihad a few things to do with higher priority. I do have a test system here.. let me check and I will come back to you

The plugin is already running on 7.0.0 beta 2 on a few systems. You should be good to go, but in case something happens or changes you still can downgrade to your previous version.

There are some posts here where we discussed it. the dongles aren't special. It works.. You just may need to install a driver as I said before. Again... Please let us know what you changed to make it work.

That is correct.

What changes did you make? Let us know.. You can get output to a monitor. You just need to pass through a usb to hdmi/dp dongle to the vm. Keep in mind you may need to install drivers for newer dongles.

Generally speaking, b660 chipset supports sriov. Are you using uefi? Please check every category.. I would try to find it in a category like "pcie subsystem settings" or "chipset configuration".

Hi! Please don't pass through your gpu to a vm... when using SRIOV only pass through a single VF to a vm... Other than that.. update your bios and make sure to enable SRIOV in BIOS.

Have you tried hw acceleration in another container? you mentioned jellyfin. Do you use ples as well? when hw is working in docker you can take a look with .. intel_gpu_top -d sriov .. while transcoding. which container of jellyfin do you use?

What about if you use /dev/dri/renderD128 ?

Hey, looks like you use the wrong methods. For 1: As you use SRIOV you have to adapt the command like this: intel_gpu_top -d sriov For 2: Don't use on of the VFs for docker. Use /dev/dri instead. Sorry?! 👀 😆😜

Hey, at the moment it looks like 14th gen is not supported from the source. It may change in the future though.

Please post Diagnostics.

When using sriov try the following command intel_gpu_top -d sriov

No, not yet. I will recheck in the next few days.

You can use the iGPUs resources for VMs while unraid is also still able to use them, yes. Just connect via a service like sunshine/moonlight, parsec, rdp or vnc. If you need a physical monitor use an usb to hdmi dongle. But keep in mind, this plugin relies on a repo which seems to be no longer maintained. So don't just sell your gpu atm 😄 Once there is more information about the future of this plugin, it will be posted here.

Please remove the line and try again

Don't bind the gpu to vfio. Did you manually add modprobe i915 to your /boot/config/go file?

Please post Diagnostics.

For now you can ignore the VFIO_MAP_DMA errors. Is the vm running 24/7? Please post Diagnostics.

Sorry for the late answer. Can you please do the following: uninstall all intel igpu related plugins -> full shutdown of the server -> start server and install intel_gpu_top and afterwards install the sriov plugin -> go to sriov plugin settings page and hit "enable now" and set VFs to 2 and save to file -> reboot Don't touch any files manually. after the reboot check log files etc and repost diagnostics please. Please also test in terminal and post the outcome: intel_gpu_top -d sriov

Please post your Diagnostics.

No, you should find a way to bypass your limitations.

Then you are doing it wrong. You mustn’t passthrough the iGPU itself. You have to passtrough one of its VFs