giganode

That error will be fixed with the next version. No, that is actually not the reason. Temporary fix should be: chmod +x /usr/local/bin/cpsumoncli mkdir /usr/local/bin/cpsumon mv /usr/local/bin/cpsumoncli /usr/local/bin/cpsumon

Hi [emoji2321] Yes, AX1500i should work. AX760i AX860i AX1200i AX1500i [emoji3516] The listed PSUs are covered by cpsumoncli. Make sure to select AXi series in the settings.

Good news for you! In the meantime there was another user with this psu. We already have a new version of corsairmi which supports hx1500i. It is not released yet, but I will send you the executable via pn as soon as possible.

You are correct. I changed the location but forgot to to change it there as well. Older users weren't affected because the binary is still at the mentioned location. I will fix that. You are using a dongle?

Thank you very much. I am currently working but I will send you a pn later today with a test version of the corresponding executable needed for hxi series psus.

Perfect, the other user is not answering at the moment. Please post the output of lsusb [emoji4]

Okay, that is not to be expected. You could check your log and see what happens to the usb device or the corresponding hid device. At the moment, I don't see any new features coming. I have to admit, I think the stock fan curves are good enough. Would you like to spin it up earlier?

chmod +x was not necessary. corsairmi reports that no compatible device was found. You said you have an rm850i, correct? Does it have USB-C as a connector? It is possible that you got a different revision, so please post the output of lsusb.

Go to Settings, set to default and try again pls. If it is not working, go to terminal and post the output of corsairmi.

Oh looks like something went wron there.. for now I disabled md5 checking. You sbould be able to install now. The difference to his version is that it doesn't support unraid's new dashboard implemented with v.6.12.0-beta7. Installing his version results in an empty dashboard page. That's also the reason why they removed the ability to install it via CA.

The plugin you installed is not supported by your is version. You need to install my version. If you get an md5 error try installing again. Is anyone else getting an md5 error?

Or go for an low end AXi series psu Gesendet von iPhone mit Tapatalk

What do you mean? You can just look for an hx1000i on Amazon and that’s it?

It has USB-C, am I correct? Please post the output of lsusb.

Note: Although /usr/local/bin is included in $PATH, his server somehow doesn't care for the subfolder cpsumon which results in the fact that the command is not found. Echo'ing $PATH showed, that his output and mine were completely identical. cpsumoncli gets found on my system but not on his. Using PATH=$PATH:/usr/local/bin/cpsumon makes cpsumoncli available for him.

PN

Please try this: /usr/local/bin/cpsumon/cpsumoncli /dev/ttyUSB0 Please post your Diagnostics.

And that is correct. I again didn't read correctly. You need to use cpsumoncli for AXi series psu. Please try the following command in cli: cpsumoncli /dev/ttyUSB0 You may need to use this command first: chmod +x /usr/local/bin/cpsumon/cpsumoncli

Please check the output of corsairmi. Did you try go to settings page and set to default? Gesendet von iPhone mit Tapatalk

RMi and HXi series use corsairmi. At the moment, the following psus are implemented: 0x1c0a, /* RM650i 0x1c0b, /* RM750i 0x1c0c, /* RM850i 0x1c0d, /* RM1000i 0x1c04, /* HX650i 0x1c05, /* HX750i 0x1c06, /* HX850i 0x1c07, /* HX1000i 0x1c1e, /* HX1000i with USB-C 0x1c08, /* HX1200i */ If you want to go for the hx1500i, I can try to integrate it. But for that we need to buy it.

Okay, I will look into that

Is your cpsumoncli executable after boot? Please post the output of cpsumoncli /dev/ttyUSB0

May I ask why you have the following in your go file? : echo PATH=.:$PATH:/usr/local/sbin:/usr/local/bin >>/root/.bash_profile cp /boot/config/group /etc/group chmod 644 /etc/group cp /boot/bin/* /usr/local/bin chmod 755 /usr/local/bin/*

Hello Thank you for the provides details. Just for me to know.. which AXi PSU is it exactly? Please verify the following with lsusb -t again before you proceed: root@mccserverur01:/dev# lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M |__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 4: Dev 4, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M Run echo -n "2-4:1.0" > /sys/bus/usb/drivers/cp210x/bind now try cpsumoncli /dev/ttyUSB0 If psu still doesn't answer try echo -n "2-4:1.0" > /sys/bus/usb/drivers/cp210x/unbind echo -n "2-4:1.0" > /sys/bus/usb/drivers/cp210x/bind cpsumoncli /dev/ttyUSB0 Can you share your final output of cpsumoncli?

Please provide the Diagnostics.