PoMpIs

My server has been running perfectly for 2 days and 19 hours since I updated to 7.1.4.rc1 👌

Hello, I just wanted to say that this version (7.1.3) doesn't give me any problems, it's been working perfectly for over 24 hours. EDIT: Well, after about 28 hours of being on, it failed, losing internet access..... And since I'm playing, I updated to 7.1.4-rc.1 😁

Well, a couple of hours later it's back to normal, maybe there was more disk usage when it first started after the update... so far it's been 3 hours without any problems... everything works as usual. 👌

Well, in the end I updated my main server to 7.1.3... I will report if it fails or not. 😅 EDIT: This is a bit weird, the CPU usage in the GUI doesn't match the actual usage at all?¿? Until a while ago in 7.1.2 it was fine 🤷‍♂️

Hi... I have a second server for testing, and I installed this version, and it's been running for over 24 hours without issues with Shinobi and 14 cameras and two VLANs... it's the same machine as the main server, so I run tests on it before moving them to the main server... The machine is a Ryzen 1600AF, 64GB DDR4 Asus B450 motherboard with RTL8111 Ethernet and an Nvidia GT1030... I haven't updated the main server yet because reading you scared me, and on the main server I use three Realtek network cards, one RTL8111 and two RTL8125.

Updated my main and test servers to 7.1.0 without any issues, everything works perfectly. 👌

Updated without problems 👌

I imagined that with "Docker-Folder there must be some problem having the cache in ZFS, because I couldn't even reinstall 3 containers without the system failing... The problem is that in my system it ends up failing in the same way even if I use "Docker.img-XFS or Docker.img" and the cache disks in ZFS... it takes longer to fail, but it fails.. As I have two licenses, I will try with other hardware in case it is a problem of incompatibility of the motherboard with UNRAID and ZFS. This system with BTRFS is super stable, it has been used for more than a year as a 24/7 permaseed and records from 13 CCTV cameras with shinobi, and Jellyfin, sonar, radarr, immich, nextcloud, and many more, and it never failed, it started to fail as soon as I moved the cache disks to ZFS in 6.12.13... so for now I will leave it in BTRFS. Maybe Could it be that the disks I use for cache are on an ASMEDIA 1064 controller and cause problems with UNRAID when formatting the disks in ZFS? Thank you very much @JorgeB

With Docker.img-XFS and the cache disks in ZFS, the errors were the least likely to occur, but within 24 hours of operation, those errors would appear again in the LOG. With Docker.img-BTRFS and the cache disks in ZFS, I also saw those errors in the LOG in less than 24 hours With Docker-Folder, and the cache disks in ZFS, it gave me a lot of problems, I could no longer reinstall my dockers, those errors would appear in the LOG immediately. Once I moved the cache disks to BTRFS, I can use Docker.img in any format and those errors have not appeared in the LOG again, and the computer works without any problems. Now it is working wonderfully with Docker-Folder and the cache disks in BTRFS, those errors have not appeared in the LOG again, and everything works at 100%.

It can't be a RAM problem, I've tried 3 different new kits and it keeps showing up in the LOG until the server crashes.. I've run memtest, stability tests on the CPU and there's no hardware problem.... It's only when using cache disks in ZFS Once the CACHE disks are changed to BTRFS, none of that happens anymore, everything works 100% stable Thank you so much

Holaaa No soy muy asiduo por aqui, pero a ver si @JorgeB me lee por aqui, que es el que mas leo y entiende mucho de esto, que me cuesta expresarme en ingles ... Vamos al lio... Tengo un sistema con un ryzen 1600AF, placa MSI B450 Gaming Plus Max 32 gigas de ram y un porrón de discos para multimedia... Siempre funciono bien con UNRAID, pero cuando pase a 6.12.13, cambie los discos de cache a ZFS-Mirror, son 6 SSDs de distinto tamaño, pero en parejas.. es decir: -2x120Gb -2x250Gb -2x480Gb y quedaban tal que asi: Una vez cambiado el formato y vuelto a mover todo a la cache, todo parecia ir bien, pero en menos de 24 horas veo esto en el LOG: Y al final acababa por colgarse el ordenador, no respondia a nada.... Como ya tenia ganas de probar UNRAID 7 beta 2... y como tengo dos licencias PRO, pues cree otro pendrive con la otra key y meti la configuración que tenia en pendrive con UNRAID 6.12.13... Funciono perfectamente y todo parecia ir bien, pero al rato volvio a saltar esto: y si no reiniciaba en menos de 30 minutos se acababa colgando el server... Al final se me corrompio la imagen Docker.img, que estaba en formato BTRFS dentro del pool ZFS.... ya puestos, borre la imagen y cambie el Docker.img a XFS.... reinstalé todos los dockers y volvia a funcionar todo bien... pero al dia siguiente por la mañana ya volvia a tener esos errores en el LOG del sistema .... Ya le estaba echando la culpa a que el propio ordenador tuviera daño fisico de hardware, le probe varios kits de ram y seguia igual, baje la frecuencia de la CPU 1Ghz y subi el vCore y seguia fallando.... asi que el equipo funciona bien y sin fallos todo por defecto, asi que estaba claro que era algo del sistema operativo UNRAID... Al final, probe a cambiar el Docker.img a "Directorio" ... y ahi si que ya empezaron muchisimos mas problemas... con los discos de cache en ZFS, era imposible volver a reinstalar los docker, salian esos errores a destajo en el LOG, y no era capaz de instalar mas de 3 contenedores sin que se colgara el server... Al ver eso, me dije, a ver si va ser cosa de ZFS con estos discos o algo asi... Con lo cual, volvi a pasar mis discos de cache a BTRFS Raid1c3....... Y todos mis problemas se han acabado... no mas mensajes de error en el LOG no mas cuelgues nada de nada.. una maravilla y 100% estable.... Y sigo teniendo el Docker.img como Directorio en vez de imagen, y van super rápido los contenedores, tanto arrancandolos como instalandolos.. Me gustaria saber porque ZFS provoca esto en mi sistema???... porque me gustaba mucho usar ZFS_Master para las instantaneas... con BTRFS lo estoy haciendo a mano, porque el plugin que hay para hacerlas "snapshots" no se puede usar en UNRAID 7 Beta 2, porque deja el pool BTRFS en modo lectura y no queda mas remedio que vaciarlo y volver a formatearlo Muchas garcias Un Saludo

thank you so much 😄

I just saw this in the log: It is the first time it has been shown

Today I installed a Windows 11 VM on one of my computers, I put a GT1030 in it to transfer it to the VM... Everything works great... but I am not able to remove the VirtIO disk in windows: I also get all the other devices, even the GT 1030, but I was able to solve those with: hotplug='off' But the VirtIO disk I don't know how to do it 🤷‍♂️ Thanks

I have a second server on which I run 3 simultaneous Windows 11 VMs, one for my wife, one for my son and one for me on a 13600k and gigabyte z790 Elite AX, two nvidia GT1030 and an RTX3060Ti... I updated it a while ago to 6.12.10 and the truth is that it works wonderfully, it's a pleasure to use it 👌

Well, I have an ASM1064 controller from UNRAID for 3 years and it has never caused a problem, and now it is still on 6.12.9 and I am too lazy to update to 6.12.10 because it is a device that is sharing torrents on a private tracker and at least have to restart the server is better 🤷‍♂️

I have updated two computers from 6.12.8 to 6.12.9 without problems everything works great 👌

I have two licenses, a Pro for many years and a basic, today I decided and updated the basic to Pro as well... I want Unraid to continue existing for life 🤞

Hello... I just saw the new prices... I hope everything goes well, I love Unraid... I have had a Pro license for many years, which I use on a PC as a NAS with 52Tb for Torrents 24/7, without parity or copy security, if it fails the content of that disk is lost and nothing happens A few days ago I bought a Basic to put on a MiniPC.... and if I don't upgrade it now to Pro later it will be more expensive? I hope everything goes well and this is not the beginning of the end of Unraid, please🙇‍♂️

There is a problem with the translation into the Spanish language... You don't show anything in the system drivers tab: And in English it does work perfectly: 🤷‍♂️ I have tried on another computer with the 30-day trial license, a completely clean installation and as soon as I install the Spanish language the same thing happens

I suppose that those of us who have a PRO license will be for life, regardless of the versions... when 7 comes out we will continue updating as before... Because we are not going to stay on v6.xx.x forever 🤷‍♂️

I hope I don't have to pay more... I have had a "PRO" license for many years, and I am very happy with unraid... If now they also make me pay per year of use, I don't think I will do it. 😔

I did the update from 6.12.6 to 6.12.8 a while ago... everything went perfectly: Ryzen 1600AF MSI B450 Gamig Plus Max 16Gb ram And many sata controllers to have 21 disks... But after updating I saw this in the LOG: it has only appeared once after updating to 6.12.8... that has never appeared until today when I did the update... What is it?? Thank you so much Greetings