bombz

Will do, thank you. It seems you can select 'acknowledge' on the disk, and it goes back to 'green thumbs up' however that pending sector is still highlighted. I will do a parity later tonight. Thank you for the response

Hello, I was recently looking at my 'dashboard' in the UnRAID GUI. I noticed everything in the SMART section was thumbs up except for my parity drive, it had a ! in the SMART section. I looked at the Attributes and out of the list the only one that was highlighted orange was.... 197 Current pending sector 0x0032 200 200 000 Old age Always Never 38 I did a SMART short test and no errors were reported. Should I RMA the disk in question before it get worse? Here is the SMART report attached. I am concerned about this, thanks. my POWER ON HOURS ON THIS DRIVE = 22162 (2y, 6m, 10d, 10h) SMART-WDC_WD40EFRX.txt

curious to how this all works ... sounds like a cool feature

Is there a way to add in a plugin to the GUI that shows temps of everything My main concern is my video card , and SAS card temp, they were hot to the touch, and recently I have added a fan to them to keep them cool, but it would be great to know that actual temps Thanks

What is CA, it's not in the drop down -- all i have is 'sync' and 'plexmediaserver' under 'limetech' So container volume I just leave blank ? or what would I add there Container volume is the directory it is pointing to, but i have those shares spanned over a bunch of disks, that's why I was adding them one by one earlier EDIT: I just left it blank -- I think I have it operational right now on my UnRAID server !!! going to have to test EDIT2: everything seems everything is fine, anyone know how to fix this issue in the logs, or has seen this issue ? PlexPy PlexTV :: Unable to parse XML for get_synced_items. WARNING Unable to retrieve data for get_sync.

So looking at this Why do I have /user/ and /user0/ I assume /user0/ = guest account and /user/ = admin ? the only users i have on my unraid are root admin guest If I am using this as a path /mnt/user/BLURAY/ what would the container volume be in relation ?

another screen

here is a test setup I was curious how to just add the share itself, rather then the folder (per disk) more screens here.

another screen

this is where all my plex metadata/logs/etc is and whatnot cache\PLEX\library\Application Support\Plex Media Server OK ill post a screen

Everything is up to date, I reconfigured the /config to the cache dir and tried to readd the container, but no luck yet

hm well it finshed the process, whatever it did, however, under the docker tab, the container does not appear, so I wonder what it processed but didn't add it saved my template, but there is a big red X next to it, so I dunno

well im testing the create container, i have added all the paths I want, I just didnt understand the /mnt/user/ path, as i can not access it via file explorer, so guess I am just going to leave that default and see what happens seems to be processing / creating something

Hm ok Yes seems a little confusing as well... not too sure how it works thanks for the help

I do have a cache drive, however I don't see it on the .img on the drive itself... hm OK well i just selected the cache drive regardless, and it seemed to load something... now I can add plexpy via community applications. What's the information I need to know regarding the 'add container' section (sorry I am new to this) perhaps there is a screen shot I can reference from to understand it a little better when adding a container ?

what do you need out of the diagnostics .zip ? so i can send it Try that I suppose -- let me know. Thanks

Still tells me docker is not enabled in community applications I am on version 6.1.9 now -- rebooted 2 times any idea how you get this installed ?

OK I am going to upgrade to 6.1.9 anyways -- haven't looked for a new update untill I started thinking about this today... I will let you know shortly how it goes

Details are in my signature

Settings tab > Docker (which is under system settings) > Enable Docker = Yes Default image size = 10GB Docker image = [path box] Apply / Done I might as well update my flash drive to the latest UNRAID version too while im shutting down

Thanks I got community applications installed, and searched for plexpy and found it. However it says my docker is not enabled , when it is , and when i select plexpy i get this ... Gathering Information... Fatal error: Call to undefined function array_column() in /usr/local/emhttp/plugins/community.applications/include/helpers.php on line 189 perhaps I need to reboot the server ?

I suppose I don't know how to do that, I was looking for a way to do that withing the UnRAID GUI. I am not too sure

Hello I have been currently using PlexPy on my Windows system , which points to my UnRAID plex server. However I have been trying to figure out how to get PlexPy installed and ran as a service on UnRAID even when you need to power cycle the server, that it stays on the server and runs. I was reading through here, but I haven't seen anything that has step instructions for UnRAID as of yet. I was trying to find the docker image for unraid, but again haven't had any luck. Could anyone help me out, I'd love not to have this running on the windows system anymore.

Hello, I was trying to find a tool that better monitors plex users on my unraid server. I saw this PlexPy, however, I have no idea how to get it running. Is there perhaps a step by step installation proceedure to follow to get it going. I have never used the docker etc, so I am curious to how it all works. I wish Plex along gave more options to disable users on the fly, and or track bandwidth within the server app. If anyone feels like they can assist me with this , it would be kind of you. Thanks again

Hello, I was trying to find a tool that better monitors plex users on my unraid server. I saw this PlexPy, however, I have no idea how to get it running. Is there perhaps a step by step installation proceedure to follow to get it going. I have never used the docker etc, so I am curious to how it all works. I wish Plex along gave more options to disable users on the fly, and or track bandwidth within the server app. If anyone feels like they can assist me with this , it would be kind of you. Thanks again