i_max

I'm getting - "did not find expected key" The config file is in place, wondering if the template needs an update?

I re-setup invidious for the companion app. Invidious can connect to the app, but I'm unable to setup the Database, are the instructions on page 1 still valid to setup the database, it seems those tables don't work on current invidious implementation? If someone has the commands or how to connect the db to run the scripts on postgress will help.

Fair point, I do need to get my power supply replaced it had the same issue with a RTX 3090 in the past (at the time I assumed it was because of spikes still an issue but I moved it to this server). Thank you. I'm assuming nothing in the logs suggest an issue? Thanks again.

Hello, This has been happening for a little while, the server would shutdown randomly. Attaching the diagnostics for help. Thank you maxraid-diagnostics-20250928-1859.zip

Thank you. Its underway. One more thing where in the diagnostics did you look to find the issue, I was trying to go through the diagnostics as well.

Thank you for confirming, I also ran an extended smart test and it came out with no errors. How do I do this? Stop the Array, Unassign drive, start the array, stop the array again and re assign the drive to the same slot and rebuild? Will it actually rebuild entirely or read and skip whats already there? Thank you

Hello, I suspect a power cable is having an issue. But a drive was disabled and I saw errors in rear or write (2048 errors). I couldn't figure what were the specific errors. Diagnostics attached. All help is appreciated. maxraid-diagnostics-20250911-1532.zip

I was able to get it to work I had to set 'external_port' to 443 and few restarts. I was almost about to move on, but its working fine. I'm working on setting the firewalls so my hosted instance can work only via VPN. Good Luck, let me know if you get stuck after trying this.

Hello, I've installed Invidious. I'm able to host it via NGINX Proxy Manager. However, I'm not able to set quality to dash (hd720 works), and I'm getting the "The media could not be loaded, either because the server or network failed or because the format is not supported." error. I'm wondering if anyone else has this issue. I had followed the instructions to use postgres 12.5 as well as setting up the database as per original post. Since everything else works, I'm assuming most things are set correctly. Here is snippets of my config file which I'm not 100% sure about: https_only: true external_port: 18443 hsts: true disable_proxy: false force_resolve: port: 3000 host_binding: 0.0.0.0 pool_size: 100 The proxy video option, doesn't tend to do anything in the settings in the GUI wrt the error above. I'm really trying to get the videos to play in 1080. To add a few more details, I've Pihole setup in the network. In the network port 80 is blocked, and invidious has Authelia authenticating before being directed to the gui. Edit: It was fixed I had to set the port to 443. (required a few more restarts etc.)

I just added this script and looking forward to using this. Thank you so much for the good work @mgutt I did want to confirm after running the script the ram usage didn't actually go up a whole lot in the Dashboard page (just to about 14%), I've 128gb of ram, and I'm hoping to have as much of it filled to use this script probably close to 80gb. But As the script runs the ram starts filling but then the usage drops down slowly after. Is this an expected behavior? How often is the script meant to be run, I set it for once daily right now to see how this goes. I am noticed once the script runs, it will also clear up the ram or could it fill the ram again with the same data if thats even possible? Thanks again.

I was able to get upload / download working. I had to set the URLs in the System Admin settings. However I'm unable to get swag working with Seafile. Could you please share what you did. There doesn't seem to be a lot conversation about this. Thank. you.

I just switched to this MFA, but wanted to emphasize, what is the recovery process if the new MFA app gets deleted on the users device, no backup codes were shared. Please clarify.

Sorry didn't mean to. Actually it just started working. I was seeing in the Photoprism logs, that the encoding was failing. I just removed the restart parameter and used only the run time parameter which seems to have done the trick. How do I add a 2nd extra parameter to the container? to re-add the --restart=unless-stopped parameter. When I added the nvidia run time parameter with the semicolon, that crashed the container while trying to spin it up. Here are the other variables I had added. -e 'PHOTOPRISM_FFMPEG_ENCODER'='nvidia' -e 'PHOTOPRISM_INIT'='tensorflow' -e 'NVIDIA_VISIBLE_DEVICES'='GPU-UUID' -e 'NVIDIA_DRIVER_CAPABILITIES'='all' Incase you want to add this in the beginning if someone else is trying this.

So I did try adding the nividia run time parameter with a semicolon after the --restart=unless-stopped parameter. Which crashed the container. I did add all the other parameters from here - https://docs.photoprism.app/getting-started/advanced/transcoding/ Nvidia hardware transcoding is supported by photoprism. Still getting nvec transcoding failed in logs.

Hello, I was trying to search through the thread, but maybe I missed it, is there anyway to enable hardware transcoding for photoprism?