Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,871

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    You can assign it to a pool and start docker, but you'd need to correct all the paths.
  2. JorgeB
    Please post the diagnostics.
  3. JorgeB
    Use this since it accomplishes the same.
  4. JorgeB
    Both cache devices dropped offline again, check/replace cables and post new diags after array start.
  5. JorgeB
    Do you have a different m.2 device you could test with? Very difficult to help if it's a device specif issue.
  6. JorgeB
    It won't. P.S: there's and option in UD to run xfs_repair, no need to use the CLI.
  7. JorgeB
    It should mount now, but there will probably be files inside the lost+found folder.
  8. JorgeB
    There are no drives on the onboard SATA and the LSI is also not detecting anything, check to see if the drives are spinning up and if they are being detected in the board/LSI BIOS, if they are not detected there they also won't be detected by Unraid.
  9. JorgeB
    Without the missing device it's not possible to mount pool normally.
  10. JorgeB
    Try booting in safe mode, force a reboot if needed.
  11. JorgeB
    It's an 8TB disk, it can take several hours.
  12. JorgeB
    It's possible, but try replacing/swapping cables first, since the pool it's not redundant you need both devices.
  13. JorgeB
    Yep.
  14. JorgeB
    If you are doing this to monitor the pool you need to reset the stats with btrfs dev stats -z /mnt/cache
  15. JorgeB
    Yes, as long as there's a BIOS installed, it's optional.
  16. JorgeB
    Try booting in safe mode to rule out any plugin issues.
  17. JorgeB
    Does the same thing happen without the NIC being bound to VFIO-PCI?
  18. JorgeB
    I'm not clear what the problem is, which NIC is the problem, the Intel NIC that is being passed-trough?
  19. JorgeB
    Try updating to v6.11.1 and run the balance again, if it still crashes you'll need to backup and re-format the pool.
  20. JorgeB
    If there's no restore download the v6.9.2 zip and extract all bz* files overwriting existing ones, you can also try v6.10.3 if you haven't yet since at least it's much newer.
  21. JorgeB
    Disk3 was already disabled and looks like disk1 is also failing, so some data loss is possible, start by running an extended SMART test on disk1 and disk3 then reboot and post new diags after array start.
  22. JorgeB
    Yes, you can downgrade, if you upgraded using the GUI go to Tools -> OS update and click restore.
  23. JorgeB
    With kernel 5.19?
  24. JorgeB
    Same thing, looks like the newer driver is looking at that, previous one wasn't, not sure if it's a driver problem or NIC problem, NIC would be main my guess, but in any case not much that can be done on the Unraid side.
  25. JorgeB
    ATA4 is disk11.
×
×
  • Create New...