Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,863

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Which Windows?
  2. JorgeB
    Yes, but just having the i915 driver loaded can cause issues for some, if you don't use the better, since you won't miss it after it's been blacklisted to prevent the driver from loading.
  3. JorgeB
    Just saw the video, in there you are attempting to boot using the GUI mode, does it boot without it? 1st boot option.
  4. JorgeB
    Nothing relevant logged that I can see, could be this issue:
  5. JorgeB
    After a disk is cleared it needs to be formatted, formatting must be done inside the array. That expected since according to parity drive was not formatted, click the format button below the stop array button.
  6. JorgeB
    Were the drives online before the reboot? Not much to see in the diags when the devices are already not detected, check the board BIOS, if they are not detected there they also won't be by Unraid.
  7. JorgeB
    Also post the permanent syslog, it's not included in the diagnostics.
  8. JorgeB
    And you are using the GUI to check filesystem? Also post new diags.
  9. JorgeB
    Was anything written to the array after the rebuild started? This includes docker/libvirt images if they are in the array.
  10. JorgeB
    Do you mean the docker folder plugin? If yes you should post in the existing plugin support thread.
  11. JorgeB
    Are you using Firefox?
  12. JorgeB
    Yes, the procedure is exactly the same as I described before, and no real need to start a new thread since it's still the same issue.
  13. JorgeB
    Enable the syslog server and post that after a crash.
  14. JorgeB
    Also try a different flash drive.
  15. JorgeB
    Enable the syslog server and post that after a crash together with the complete diagnostics.
  16. JorgeB
    Parity2 looks healthy, you can re-enable parity2 to see if you are able to rebuild the 2 disabled disks, if I understood correctly old disks 6 and 8 are already wiped?
  17. JorgeB
    Yes, but before attempting that make sure backups are up to date, same issue that caused the pool to hang after removing a device might do the same when converting the pool, to convert click on cache, then scroll down to "balance status", next to the "balance" button select "convert to raid0" then click "balance".
  18. JorgeB
    Yep.
  19. JorgeB
    OK, it's balancing to raid1, didn't crash wet which is a good sign, wait to see if it finishes, if yes backup anything important in the pool and recreate with just the single device, assuming that's still what you want.
  20. JorgeB
    Now unassign all cache devices, start array, stop array, re-assign both cache devices and post new diags after array start.
  21. JorgeB
    Don't start the array for now, post the output of btrfs fi show
  22. JorgeB
    New release should be available soon, if you need that now best to downgrade for now.
  23. JorgeB
    Try again after booting in safe mode to rule out any plugins.
  24. JorgeB
    Click on disk2, set the fileystem to xfs and try again.
  25. JorgeB
    Some issues but nothing obvious that explains the crashing, could be this issue:
×
×
  • Create New...