Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,858

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Pool is missing a device, do you know what happened to it?
  2. JorgeB
    Cache device is dropping offline, try connecting it to the onboard SATA controller instead.
  3. JorgeB
    Diags are showing parity2 invalid? Looks valid on the screenshot, currently you won't be able to rebuild the 2 disabled disks.
  4. JorgeB
    Yep, and probably for all having these issues, also I believe that since your board has IPMI the monitor output will use the AST GPU, so connecting a monitor won't help.
  5. JorgeB
    It should run OK with a single drive, make sure shares are not set to nocow.
  6. JorgeB
    It's a strong possibility, test with a different PC if available.
  7. JorgeB
    Yes, looks like the HBA is the problem, it wasn't being detected by Linux, you can try a different slot or PC if you have one to confirm.
  8. JorgeB
    Stop array, unassign all cache devices, start array, stop array, re-assign all cache devices and start array, that should do it.
  9. JorgeB
    Which is the HBA you're using? Not seeing any in the device list.
  10. JorgeB
    Other than have been run too hot in the past it looks OK, lots of UDMA CRC errors so the SATA cable should be replaced, unless they are old.
  11. JorgeB
    Looks like a bad drive: device Test Unit Ready [medium or hardware error (serious)]
  12. JorgeB
    Check filesystem on disks 2 and 5, note that you must remove -n or nothing will be done, and if it asks for -L use it.
  13. JorgeB
    Just to see if you can assign and unassign drives without losing the array config.
  14. JorgeB
    Agree, lets see a SMART report for disk1.
  15. JorgeB
    Parity looks healthy, and unlikely that two other drives would die at the same time, please post the diagnostics.
  16. JorgeB
    Disk2 is showing some SMART issues, run a long test.
  17. JorgeB
    It's not logged as a disk problem, just re-sync parity, check/replace cables if you want to rule that out.
  18. JorgeB
    Problem with the HBA, then it dropped all the devices, I would recommend using the onboard SATA for the SSDs anyway, or trim won't work.
  19. JorgeB
    Try blacklisting the iGPU, it works for some.
  20. JorgeB
    Please post the diagnostics.
  21. JorgeB
    This is strange because it looks like only some users are seeing this, the 3 servers I've updated so far all have an AST GPU for IPMI, no monitor connected, and I don't see that error, maybe there's a way to suppress the error to avoid spamming the log, error itself looks mostly harmless.
  22. JorgeB
    That suggest the SSD you are using is just slower, suggest getting one known to perform better, like the Samsung 870 EVO or Crucial MX500 for example.
  23. JorgeB
    Enable turbo write and copy directly to the array, that will help test if it's a cache device problem.
  24. JorgeB
    The rebuilt disk will have the same data you see on the emulated one.
  25. JorgeB
    Not saying defect, I meant device related, just looks like the devices are not supported by the newer kernel, might be a device or kernel issue.
×
×
  • Create New...