Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,771

  • Joined

  • Last visited

  • Days Won

    708

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Disk29 is parity2, looks more like a power/connection problem, but can't see the SMART report, next time please post the diagnostics instead.
  2. JorgeB
    Initially it's logged as a disk problem, but then the disk dropped offline so there's no SMART, reboot/power cycle the server to see if the disk comes back online and post new diags.
  3. JorgeB
    No LSI HBA detected, make sure it's well seated or try a different PCIe slot if available.
  4. JorgeB
    You can manually edit smart-one.cfg on the flahs drive to add the other devices.
  5. JorgeB
    Unmenu was for older Unraid releases, it's not supported with v6.
  6. JorgeB
    Note that this is also a valid option bur only if the emulated disk6 is mounting and contents look correct.
  7. JorgeB
    You can do a new config and Unraid will accept the new devices names (assuming you now which disk is which), but could still have a problem if the previous RAID controller used non standard partitions, i.e., you'll get an "invalid partition layout" error.
  8. JorgeB
    No, I mentioned doing a new config: Tools -> New Config, keep all assignments, check parity is already valid before array start, then run a correcting check.
  9. JorgeB
    Drives might be formatted protected see below: https://forums.unraid.net/topic/93432-parity-disk-read-errors/?do=findComment&comment=864078 if that alone doesn't help see also here: https://forums.unraid.net/topic/110835-solved-help-with-a-sas-drive/?do=findComment&comment=1011689
  10. JorgeB
    If you're using Windows 8 or later you can transfer the files using Windows explorer and user shares and the operation will be done locally, using Samba's server side copy.
  11. JorgeB
    Using a root share will bypass the user shares and make Unraid ignore share settings.
  12. JorgeB
    Most likely NIC or NIC driver related, Realtek driver support has never been great with Linux.
  13. JorgeB
    Share settings look correct, is the data to tv share being transferred over the LAN directly to the share or locally from another share?
  14. JorgeB
    No, that would be the correct setting, please post the diagnostics.
  15. JorgeB
    Thank you @limetech, I missed it in the rc3 or rc4 release notes but this has finally been implemented, screenshot is from v6.10rc4:
  16. JorgeB
    I never said that, just that with some hardware it's not that uncommon, but it's generally reliable, it can also happen with SATA devices, though in those cases it's usually power/connection related, NVMe devices have been reliable for me and most users, and I have multiple NVMe devices in multiple servers.
  17. JorgeB
    Split level overrides allocation, check what level it is set for that share.
  18. JorgeB
    Even after fixing with testdisk? Try rebooting if you didn't yet, if it still doesn't work you can try mounting manually while specifying the filesystem, if it still doesn't work file recovery util is the best bet.
  19. JorgeB
    Depends on what exactly is wrong with the partition, Unraid requires a specific MBR signature, if the problem is there it will still mount with UD, you can them copy the data, if the partition itself is damaged you can try to fix it with testdisk, or use a file recovery util like UFS explorer to try and recover the data.
  20. JorgeB
    That's a partition error, not filesystem, so fsck won't fix it. If parity is valid you can make Unraid rebuild that disk, and at that time the partition will be correctly recreated, to check you can unassign that disk and start the array, if the emulated disk mounts you can then rebuild on top.
  21. JorgeB
    Assuming nothing was written to disk6 since it got disable I would do a new config to re-enable it, then run a correcting parity check.
  22. JorgeB
    nope.
  23. JorgeB
    That's not Unraid, possibly some hardware issue like overtemp or a failed fan. Settings -> Date and Time: set correct timezone.
  24. JorgeB
    That's correct the actual temp is 100-the attribute raw value, so 100-81=19, some devices have it like that.
  25. JorgeB
    Looks about right, it will speed up once it finish reading the 4TB disks, disks are always much faster on the outer tracks and slow down as they go through the inner tracks.
×
×
  • Create New...