Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,644

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Disk1 look fine, though short test is usually not useful, unless there are already pending sectors, you should run an extended test when needed, but this looks like a connection problem, replace both cables on disk1.
  2. JorgeB
    Either one will do, but if there are many errors a sync will be faster. This.
  3. JorgeB
    See here for the performance with an expander and various disks, it will be the same as the H310:
  4. JorgeB
    Most of them yes, old Archive drives work great, some newer models like the ST8000DM004 appear to be more hit and miss, at least some of them.
  5. JorgeB
    If the shares are set to 0Kb any copy to the array that uses cache may run out of space when the cache if full, since cache floor default is only set at 2GB.
  6. JorgeB
    Please explain what is the current problem.
  7. JorgeB
    Parity won't be valid because of all the read errors, do this: and try again.
  8. JorgeB
    Please post the diagnostics: Tools -> Diagnostics
  9. JorgeB
    Try stopping the integrity plugin, it's hashing files.
  10. JorgeB
    That's not needed for v6.8.x Never seen this firmware before, could be a beta, latest version on Avago's site is 20.00.07.00, try that one.
  11. JorgeB
    Please post the diagnostics: Tools -> Diagnostics
  12. JorgeB
    Why do I bother if people don't even read the link?
  13. JorgeB
    Yeah, then AFAIK not much you can do, other than trying with a different backplane, or getting one from ebay, but they can be expensive even used.
  14. JorgeB
    Rebuild is sequential, but you don't need to start a rebuild for that, whatever the emulated disk shows is the same it will show after the rebuild is complete.
  15. JorgeB
    What kind of backplane? If there's no expander swap cables with another slot/miniSAS cable, if it's an expander backplane it can only be the slot.
  16. JorgeB
    After the problem is fixed.
  17. JorgeB
    RAM is way over max supported for that CPU/RAM combo, and a known stability issue with Ryzen, respect max RAM speeds here, btrfs file system should be recreated.
  18. JorgeB
    These are basically the same and enough for spinners. These are PCIe 3.0, 9300-8i and 9400-8i are SAS3 also, could justify for SSDs or when using more than 8 disks with a SAS expander.
  19. JorgeB
    smartctl -t long /dev/sdX
  20. JorgeB
    You didn't mention that before, assuming the diags were taken after a transfer there's nothing logged, so can't guess what the problem is, but it should be easy to rule out by swapping that disk with another one and see if the problems stays with the slot/cable or follows the disk.
  21. JorgeB
    This is the first Google result:
  22. JorgeB
    The 8TB drive are not SMR, despite the model being the same.
  23. JorgeB
    You can find them in the SMART report, this section: SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3966 - That one passed, a failed test usually appears as "Completed: read failure" and an interrupted one as "Interrupted: host reset", also make sure disk spin down is disable, depending on the Unraid version it may interrupt the test.
  24. JorgeB
    Sorry, can't really help with encryption since I've never used it, but try searching the forum, seem to remember others users copying the heather from a different drive.
  25. JorgeB
    That's a MegaRAID controller, there's no IT mode, always RAID mode, see here for a list of some recommended options:
×
×
  • Create New...