Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,616

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    You need to rebuild the disk using the GUI.
  2. JorgeB
    It's not recommend, one of the reasons is this one, it can get disconnected without an apparent reason: May 3 09:29:25 Tower kernel: usb 4-1: USB disconnect, device number 2 May 3 09:29:25 Tower kernel: usb 4-2: USB disconnect, device number 3
  3. JorgeB
    Assuming that disk was xfs you can leave xfs_repair running to see if it finds a secondary superblock, it can take a few hours.
  4. JorgeB
    Sorry, no idea.
  5. JorgeB
    No valid filesystem is being detected but a partition does exist, post output of: xfs_repair -nv /dev/sde1
  6. JorgeB
    That's just to change the name of the mountpoint, the problem is the mount button not being enable, post output of blkid and fdisk -l /dev/sde
  7. JorgeB
    This is a question for the UD support thread.
  8. JorgeB
    There are macvlan call traces and those are known to end up crashing the server, I linked the last thread because there are some reports that just disabling host access to custom networks also fixes the issue for some.
  9. JorgeB
    The error or rebooting? Unbalance will run on the disk paths, so not affected by user shares, but rebooting will abort it.
  10. JorgeB
    shfs segfaulted, rebooting will fix it.
  11. JorgeB
    RAID controllers are not recommended for Unraid, though it still should work, but there's a problem initialing your controller: May 2 17:42:48 unraid kernel: megaraid_sas 0000:01:00.0: Failed to transition controller to ready for scsi1. May 2 17:42:48 unraid kernel: megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 6406 You can try a different slot if available, or a firmware update, but best solution would be not to use it.
  12. JorgeB
    Changed Status to Closed Changed Priority to Other
  13. JorgeB
    It's not hard to find examples of how to just by googling it, e.g.: https://forums.serverbuilds.net/t/guide-updating-your-lsi-sas-controller-with-a-uefi-motherboard/131
  14. JorgeB
    Please use English only here, alternatively you can use the Chinese section.
  15. JorgeB
    Filesystem is corrupt again,
  16. JorgeB
    Format button in next to start/stop array buttons.
  17. JorgeB
    Looks more high load due to i/o wait, if you stop all cache activity (turn off docker service/VMs if needed to test) does it get better?
  18. JorgeB
    See also here: https://forums.unraid.net/bug-reports/stable-releases/690691-kernel-panic-due-to-netfilter-nf_nat_setup_info-docker-static-ip-macvlan-r1356/
  19. JorgeB
    Yes, but there are some known stability issues, I would recommend going with Intel for Unraid/Linux.
  20. JorgeB
    You need to fix filesystem: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui
  21. JorgeB
    Delete/rename network.cfg and network-rules.cfg in the flash drive and reboot, if after that it still doesn't come up please post the diagnostics: Tools -> Diagnostics
  22. JorgeB
    As expected there's no SMART report for disk9, like mentioned above the disk should come back up after a power cycle, also run an extended SMART test on disk3, then post new diags.
  23. JorgeB
    Not booting reliably suggests a hardware issue, you can also try booting in safe more or using a different flash drive, as for the original issue no errors so far, post new diags if/when it starts again.
  24. JorgeB
  25. JorgeB
    No
×
×
  • Create New...