Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,521

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Also note that max length from controller to disks for SATA devices is 1 meter.
  2. JorgeB
    Yes, you need one of each.
  3. JorgeB
    Check filesystem.
  4. JorgeB
    Yep.
  5. JorgeB
    Flash drive troubles, start by running chkdsk, if that doesn't help re-format or replace.
  6. JorgeB
    Correct, they don't update correctly during the parity copy portion.
  7. JorgeB
    Then edit values and save:
  8. JorgeB
    Speeds on the GUI don't show during a parity copy, there are no more errors on the log, just check that the copy percentage changes as expected.
  9. JorgeB
    Like expected you need to change FAN2 thresholds, you can do that with the plugin, set them to 0 / 100 / 200 for example
  10. JorgeB
    Looks like it, check the board's system even log, it might have more info.
  11. JorgeB
    Lots of ATA errors on Parity2, check/replace cables.
  12. JorgeB
    Please post the diagnostics: Tools -> Diagnostics
  13. JorgeB
    Run another balance to raid10.
  14. JorgeB
    Emulated Disk8 appears to be mounting correctly, if contents look OK and there's no filesystem damaged (like a lot of lost+found stuff) rebuild on top.
  15. JorgeB
    Syslog is just after rebooting so not much to see, you can try this.
  16. JorgeB
    Did you check the log like I asked above? If a fan is reaching the threshold all fans will spin up, independent of settings.
  17. JorgeB

    Adding Drives

    JorgeB replied to HumidGnome's topic in Hardware

    This error doesn't really describe the problem (it's an old bug) but it usually happens when adding devices to an array with an existing invalid device, please post the diagnostics: Tools -> Diagnostics
  18. JorgeB
    For some time Intel has always been faster for gaming, Ryzen 3000 is close, hopefully Ryzen 4000 will be on par or even faster, while there could be further updates to FS to help with performance I won't expect to ever be great with 1st and 2dn gen Ryzen based CPUs.
  19. JorgeB
    Yep, but if you need it zip is here: https://s3.amazonaws.com/dnld.lime-technology.com/next/unRAIDServer-6.9.0-beta25-x86_64.zip
  20. JorgeB
    No, you can update, extract only all the bz* files from the beta zip replacing the current ones.
  21. JorgeB
    You'll need to install the latest beta for Unraid to have a driver for your NIC.
  22. JorgeB
    With AMD CPUs, FS2020 basically only performs well on Zen2, any Zen/Zen+ will be on the slow side, see for example here: https://www.pcgameshardware.de/Microsoft-Flight-Simulator-Spiel-15259/Specials/FS-2020-Benchmark-Test-Review-1356467/2/
  23. JorgeB
    This usually means one (or more) of the fans is hitting the lower non recoverable threshold, check the IPMI event log with the plugin, it will tell you which one it is.
  24. JorgeB
    Sep 26 10:02:31 BMS kernel: mpt2sas_cm0: Protocol=( Sep 26 10:02:31 BMS kernel: Initiator Sep 26 10:02:31 BMS kernel: ,Target Sep 26 10:02:31 BMS kernel: ), IT Mode = Initator-Target Mode
  25. JorgeB
    Start the array normally, disk will likely mount, if it doesn't run xfs_repair. Never a good sign, make sure you have anything important backed up, especially since there's no parity, you can also run an extended SMART test to confirm disk is still OK.
×
×
  • Create New...