Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,519

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    You need to shutdown, by force if necessary.
  2. JorgeB
    No, some expanders can be powered either way, it won't affect performance.
  3. JorgeB
    Everything looks normal to me in the syslog, try accessing using the IP address- 192.168.0.15
  4. JorgeB
    Are you booting GUI or normal model? NIC is working now so try normal mode and accessing the server via browser.
  5. JorgeB
    Only with multichannel enable, and good luck getting that to work with Unraid, but please post back if you do [emoji4]
  6. JorgeB
    If you have the docker folder plugin installed remove it.
  7. JorgeB
    Samba is also single threaded, no idea if making shfs multi threaded would help, but it should still be possible to optimize shfs so that it doesn't have so much of an overhead.
  8. JorgeB
    https://s3.amazonaws.com/dnld.lime-technology.com/next/unRAIDServer-6.9.0-beta25-x86_64.zip
  9. JorgeB
    HBA problem: Sep 18 04:37:05 Apollo kernel: mpt2sas_cm0: fault_state(0x4101)! Make sure it's well seated and sufficiently cooled, you can also try a different slot if available.
  10. JorgeB
    Thanks for posting back, weird that would cause the format to fail.
  11. JorgeB
    It's probably some device using a PCIe port, try removing the NVMe devices and/or disabling the Asmedia USB controllers.
  12. JorgeB
    There's no driver for your NIC in v6.8.x, you need to use v6.9-beta25.
  13. JorgeB
    I don't see those errors on the syslog posted, to decrease log spam disable mover logging, you also appear to have a cache balance running daily, that's unnecessary and also a source of log spam, disable that also, reboot and post new diags after it happens again.
  14. JorgeB
    It's possible, any hardware can fail at any time, if you have a spare one it's worth trying.
  15. JorgeB
    They are in the flash drive: flash\config\plugins\dockerMan\templates-user
  16. JorgeB
    I don't see any issues in the syslog.
  17. JorgeB
    See if you can format it manually in Unraid, just to confirm if it's a Linux or Unraid issue. First wipe it with blkdiscard then partition and format, I can post the commands if you don't know how to.
  18. JorgeB
    Edit /boot/config/domain.cfg and change service="enable" to "disable"
  19. JorgeB
    These are OK, it's a btrfs balance resulting from removing one of the cache devices.
  20. JorgeB
    It's USB, so not good for Unraid.
  21. JorgeB
    Syslog only show the first errors on disk1 but errors on 4 disks suggest a power/connection problem, if they share something like a power cable/splitter or miniSAS cable start by looking at that, also cancel the rebuild, you'll need to start over.
  22. JorgeB
    Basically you need to try swapping the network components one at a time, start with whatever is easier, cables/NICs/Switch/Transceivers
  23. JorgeB
    That suggests the network is the problem, you should get close to line speed, I get around 8 to 9Gbits/s.
  24. JorgeB
    Good to run a single stream iperf test to confirm bandwidth then you can also try transferring to/from a disk share instead of a user share, some users have a very hight user share overhead.
  25. JorgeB
    Try formatting it in a different PC and/or with a different OS, but looks like a device problem.
×
×
  • Create New...