jfrancais

Been running solid since Monday with no errors thus far.

diagnostics attached gobo-diagnostics-20220530-1123.zip

https://support.hp.com/ie-en/product/hp-z800-workstation/3718645/document/c01709726

Thanks for the reply and the catch. disabling VT-d in bios brought me back up but now I need to figure out what to do. I have VMs running on this that I need for production so disabling VT-d leaves me non functional. I wasn't having any issues since going to 6.10 so I'm wondering if it is safe to bypass the blacklist.

Good morning, looking for some assistance. I upgraded top the newest release this morning and my machine came back up missing the NICS. netxtreme bcm5764m gigabit ethernet pcie "lshw -class network" shows the NICs as unclaimed. can anyone assist? No hardware changes, just the most recent update (just a small revision jump as I was on the latest release prior to this upgrade.

I'm getting this error with Fix Common Issues plugin but I think the use case I'm using, this is expected behavior. Wanted to throw it out there in case someone has some recommendations to alternatives or if they think it is safe to ignore. I want to be able to mount my google drive as a file share to be able to use in at least one of my containers. I found a Docker container that does just that (mitcdh/google-drive-ocamlfuse). So what I've down is use this container to mount the google drive to a location on unRaid (I used /mnt/disks/gdrive) and then setup a volume in the other container(s) to use that location as a volume. It seems to work great (as long as I start the containers in order). A couple behavior things: - the owner of /mnt/disks/gdrive seem to revert to root on reboot. I'd like it to stay nobody so this all works. Right now I'm manually fixing that on reboot. Would a different mount location be more appropriate? - the Fix Common Issues throws an error asking for it to be setup as slave in the container. Doing that causes it to not work, the drive that is mounted in the google-drive container isn't visible from unraid and therefore isn't visible in the other containers. Anyone have any thoughts on this? Any bad side effects to what I'm doing? Can I safely ignore the warning? Is that the best location to do the mount and is there a way to keep that nobody:users ownership at the mount point? Thanks in advance for any thoughts and suggestions.

Thanks UNRAID support for being super fast. They have resolved the key issue and I'm back up and running. Thank goodness for great backups as my data on the key was fully recovered and I don't have to re-setup anything. A friendly reminder, now would be a great time for you to install and setup "CA Backup / Restore Appdata" to backup both your appdata and your USB key.

I submitted on the webform on the website. Hopefully someone will be get back to me soon. In the mean time I will try the trial method. Thanks

Just had my USB stick die. This is the second one within a year so it won't let me transition my license key. What is the best way to get this expedited? My entire system is down at the moment.

Thanks for the suggestions. A couple nervous days but after running 3 parity checks, the 3rd came back clean.

nothing in the log pointing to an issue? Should I bring it back up and run parity and correct one more time and see if it fixes?

running a memory test now. Also remembered when the system came back up I got an error that the bios was reset to defaults and needed the date. I replaced the bios battery and reset to defaults. Could be a bios setting playing havoc as well.

Partly corrected, ran another one and it is finding more parity errors. Not good.

Had a power outage last night and when the server came back up there were some issues. First, USB was completely corrupt. Pulled another into rotation and rebuilt from my USB backup. Booted up and partity check ran. When it completed I got Last check completed on Mon 06 Jul 2020 06:30:00 PM CST (today), finding 1645 errors That has me really worried. I have attached my diagnostics. Any thoughts as to what might be the cause? gobo-diagnostics-20200706-2011.zip

I'm sure this has been answered before but for the life of me I can't figure it out. Heres my PHP info from the admin screen: Version: 7.3.17 Memory Limit: 2 GB Max Execution Time: 3600 Upload max size: 3 GB I was able to set memory limit and upload max size without issue, but that max execution time I can't find a way to change it. I need that bumped up but I haven't been able to find any configuration file setting to make it stick. Can anyone assist? I'm running into issues because of it.

Those were two empty folders. When I changed the shares to no longer be on the cache drive some time ago, I had moved them off to the array but forgot the root share folder (which was empty). All the content inside were moved off to array already. Those empty folders have been removed from the cache

I had two empty folders on cache that shouldnt have been there based on the cache-no shares. No content in them but they have been removed now. My cache disk is fairly full because I have 3 VMs with relatively large disks running on cache. That plus the Docker sizes consume most space.

Name Container Writable Log --------------------------------------------------------------------- binhex-minecraftbedrockserver 3.46 GB 1.43 GB 4.66 kB binhex-minecraftbedrockserver2 3.46 GB 1.43 GB 4.44 kB binhex-krusader 2.47 GB 16.4 MB 16.7 kB freepbx 2 GB 0 B 22.8 MB binhex-nzbhydra2 1.11 GB 74.9 MB 71.9 kB plex 724 MB 302 MB 6.67 kB sonarr 622 MB 21.1 MB 24.2 kB ombi 606 MB 230 MB 11.4 kB radarr 574 MB 22.4 MB 16.1 kB NginxProxyManager 529 MB 193 kB 60.1 kB HandBrake 504 MB 85.3 kB 19.4 kB nextcloud 354 MB 40.2 kB 4.89 kB Nextcloud-DB 351 MB 344 kB 4.43 kB NginxProxyManager-DB 351 MB 344 kB 4.43 kB sabnzbd 260 MB 303 kB 9.55 kB headphones 232 MB 18.2 MB 9.18 kB steamwise 204 MB 0 B 7.48 kB steamwise2 204 MB 0 B 6.43 kB m3u8 167 MB 39.6 kB 7.41 kB transmission 78.1 MB 9.58 kB 6.92 kB I did a bit of clean up of some containers that were kicking around. This is what remains.

I'm wondering if I have a bad SSD in my cache pool. Any recommendations to verify that? I deleted the docker.img and am redownloading apps and it seems to be quite slow going that process

Can anyone assist? On my dashboard tab I noticed under usable size, memory was 100%. I ended up turning off Docker. that went down to 1%. Now when I turn Docker back on I get "Docker Service failed to start." Server reboot and problem remains. Can't access any of my containers. Can anyone assist? gobo-diagnostics-20200430-1531.zip

1. wired isn't an option, ipad/ios devices. I don't believe it to be a wireless issue. I can have two devices on the same wifi in the same room as the access point and it appears on one and not on the other. Typically the first person that opens the app will see the server and the second person that opens the app will not. 2. nothing should be in the way here either. I don't run adblockers or pihole. no vlans. Only tricky thing is the networking on unraid itself. I tried with custom networking/static IP as well as bridge networking and same occurs. 3. possible, unsure the best place to look for that, that is why I posted here 4. same as above.

Been working on setting up a server using this container for my family of 3 to play. Internal network only. I have the initial configuration setup allowing 10 users, have my whitelist, permissions setup. Problem I'm seeing is that the server seems to be only seen intermitantly and usually by only one person. I've been able to connect and play, but other users on the lan not so much, and some times they can connect but I cant. Doesnt show up in the list in the app (all iOS devices) and manually entering the server details don't connect either. Having no issues with other containers (I use plenty) so I'm unsure where to go from here. Anyone else experience this? Thoughts?

I still need to develop the image which currently involved the Pi. Once setup I pull the image and deploy to other Pis. I'd like to do all that configuration on the PC and deploy from there.

For me specifically, I'm looking to do Raspberry Pi central management, development and testing before I send my images off to SD cards.

Would love to spin up virtual raspberry pi's for development. Should be relatively straightforward to add with qemu already having ARM support available. Would love to be able to use the webgui to create virtual pis that mount and boot from standard pi image files.