sosdk

Updated from 7.1.4 with no issues

New diagnostic file tower-diagnostics-20260417-1014.zip

This is my cache

Ok thx

Everything is running again. Should I be worried about my cache SSD drive ? It's 7.5 years old now. Guess it about time to replace anyway

Had to do a hard power down New diagnostic file tower-diagnostics-20260415-1815.zip

Hi I'm unable to shut down Unraid Log is full of: pr 15 10:18:04 Tower emhttpd: Unmounting disks... Apr 15 10:18:04 Tower emhttpd: shcmd (55053942): umount /mnt/cache Apr 15 10:18:04 Tower root: umount: /mnt/cache: not mounted. Apr 15 10:18:04 Tower emhttpd: shcmd (55053942): exit status: 32 Apr 15 10:18:04 Tower emhttpd: Retry unmounting disk share(s)... How do I unmount ?

Here's the diagnostics.tower-diagnostics-20260415-1815.zip

Hi Getting errors with dockers and WM's Did my cache disk die ? Log is full of this error: Apr 14 22:40:32 Tower kernel: BTRFS error (device sdf1 state EA): bdev /dev/sdf1 errs: wr 264, rd 441762, flush 0, corrupt 0, gen 0 Cache drive is sdf Havnt tried a reboot.

Hi Can I create a bootable pool with more than 2 disks ? Got 3*1TB nvme and would like to have the 2TB for data.

Thanks JorgeB Followed the guide and got my array and WM running. Parity is building :) Can i restore my dockers without the USB ?

Hi Just tried to upgrade from 7.0.0.1. Now Unraid wont boot from my USB, BIOS says it's not bootable anymore. For some stupid reason I didnt make a backup before upgrading. A bit worried to mess thnis even more up. This shows up on my Win11 PC and if I click on DVD is wants me to format. It's my Unraid USB Quote JorgeB Moderators 6 minutes ago comment_1583027 Try recreating the flash drive, first backup the current one, then recreate it using 7.1.4 with the USB tool, confirm the flash drive boots with the stock install, and if yes, restore only the /config folder from the backup overwriting any existing files. If you need further help, please start a new thread in the general support forum this thread is not the right place for support. Problem is that I cant acces the USB at all. I think it died :( Can I "reinstall" Unraid and get everything up again without losing data ? Got a lot of data, some dockers and 1 Windows 11 WM that I would like not to lose

Hi Just tried to upgrade from 7.0.0.1. Now Unraid wont boot from my USB, BIOS says it's not bootable anymore. For some stupid reason I didnt make a backup before upgrading. A bit worried to mess thnis even more up. This shows up on my Win11 PC and if I click on DVD is wants me to format. It's my Unraid USB

Drives are empty. In a pool I would need 2 drives to "backup". Or could I set up some job to copy some folders from pool drive to array ?

Hi I want to shrink my array by removing some old 4TB drives. Will the array online while parity is rebuilding ? Can i swap an array drive to a SSD ? I know I want get quick write speed, but I need a drive to be spun up all the time with documents I read a lot and fast read speed would be nice to have.

Ok - I'll do a reboot and try again.

Hi Tried yo modify script but still doesnt run correct. Is there a link to correct script ?

Hi Just ran the Clear an unRAID array data drive script on a 4TB drive and it only took 2 minuttes. Is this a succesfull run ? Script location: /tmp/user.scripts/tmpScripts/ZERO Drive/script Note that closing this window will abort the execution of this script *** Clear an unRAID array data drive *** v1.4 Checking all array data drives (may need to spin them up) ... Found a marked and empty drive to clear: Disk 2 ( /mnt/disk2 ) * Disk 2 will be unmounted first. * Then zeroes will be written to the entire drive. * Parity will be preserved throughout. * Clearing while updating Parity takes a VERY long time! * The progress of the clearing will not be visible until it's done! * When complete, Disk 2 will be ready for removal from array. * Commands to be executed: ***** umount /mnt/disk2 ***** dd bs=1M if=/dev/zero of=/dev/md2 You have 60 seconds to cancel this script (click the red X, top right) Unmounting Disk 2 ... umount: /mnt/disk2: target is busy. Clearing Disk 2 ... dd: error writing '/dev/md2': No space left on device 9+0 records in 8+0 records out 8388608 bytes (8.4 MB, 8.0 MiB) copied, 0.00268934 s, 3.1 GB/s A message saying "error writing ... no space left" is expected, NOT an error. Unless errors appeared, the drive is now cleared! Because the drive is now unmountable, the array should be stopped, and the drive removed (or reformatted).

IS this still a good motherboard for AM4 and Unraid ?

I would like a cache setting that allows files to be on both cache pool and array.

Just tested and it's working

Hi I think there's a new version out again

Not sure if it's the same problem as I had with a 2070. I forgot to pass the USB port to my Win10 WM.

Did some further invistigation.....My Unraid server booted into bare metal win10 on the NVE disk I normally pass to my Main WM Win10. Hope it makes sence....Unraid didnt boot from USB drive.

Hi Got the error 43 in Windows 10 on my main Win10 with a Nvidia 1060 after adding a new Win10 with an old AMD card. Read this post and decided to disable UEFI boot. Now I dont have the error 43 anmyore, but both graphics card and my Unraid drive is passed to my main Win10. And I cant access the Unraid webpage or ping the IP of Unraid. I'm lost....how do I fix my Unraid ?