justvano

Turns out it was my browser ad blocker that was causing the issue. I turned it off, deleted cookies and cache and all is right again. Hopefully this helps someone else with the same issue.

I need help. I've installed the container, input my username and password and saved it in a password manager (so i'm confident it's correct), connected to my mariadb container, and cannot login. It does not say that I've input incorrect credentials, but after a few attempts it says they've detected multiple invalid login attempts. What can I do?

I've been getting errors any time I download anything since updating to Unraid 6.9. Any ideas on how I can fix this issue?

I am having the same issue since upgrading Unraid to 6.9.

I looked back in some of the other posts and it looks like this docker is dead.

Hi all, I am new here and only recently installed youtube-dl-material. It worked great for the first while and then I added too many channels and filled my cache drive. The app stalled and since then will not start. Here is the log: SyntaxError: Malformed JSON in file: ./appdata/db.json Unexpected end of JSON input at FileSync.parse [as deserialize] (<anonymous>) at FileSync.read (/app/node_modules/lowdb/adapters/FileSync.js:37:30) at LodashWrapper.db.read (/app/node_modules/lowdb/lib/main.js:32:21) at module.exports (/app/node_modules/lowdb/lib/main.js:51:13) at Object.<anonymous> (/app/app.js:45:12) at Module._compile (internal/modules/cjs/loader.js:999:30) at Object.Module._extensions..js (internal/modules/cjs/loader.js:1027:10) at Module.load (internal/modules/cjs/loader.js:863:32) at Function.Module._load (internal/modules/cjs/loader.js:708:14) at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:60:12) at internal/main/run_main_module.js:17:47 /app/node_modules/lowdb/adapters/FileSync.js:42 throw e; ^ If you have any suggestions for a fix please let me know. Thanks in advance.

This seems to have worked. Thank you!

I'm having the same issue. I've tried lots of different server locations with no change. I've been using this setup for 2 years with no issues. I could really use some help with this issue.

I figured out my issue. It seems that it was nothing to do with delugevpn but a cache issue. I've had this before where everything breaks and just did not make the connection because in the past nothing would work, including docker itself. I think I am having issues with brtfs but not entirely sure yet. I've reinstalled delugevpn and now my download programs are back up and running. I am fixing Plex and working on a solution for Nextcloud.

Hey Bugster, did you ever figure out the problem? I did not get any other responses.

Still having the same problem guys despite more effort to trouble shoot. The one thing I thought of was that I recently turned Snort on in Pfsense so I tried turning that off but no change. Any ideas?

Can you be more specific about what firewall rule you changed and why?

Hey Bugster, Thanks for the reply. It looks like I am on version 2.0.4.dev23. Hopefully that is what you are looking for. Still having the same trouble. I haven't tried much else because I am unsure of what to try and do not want to further break things.

Hi all, I've been having the same problem once I upgraded to 6.8.3. I have been using Switzerland for the last year or more with no trouble. Now the last week I have no internet access from Sonarr, Radarr or Lidarr. Also Plex appears to be struggling to upload content for posters, etc even though I don not have plex running through a proxy. Error's i'm getting: Sonarr - Failed to test proxy: Error: ServerProtocolViolation: 'https://radarr.aeonlucid.com/v1/ping' Radarr - Failed to test proxy: http://services.sonarr.tv/v1/ping Lidarr - Failed to test proxy: https://services.lidarr.audio/v1/ping I don't think I've changed anything before or after the update. I am running pfsense on it's own hardware but also haven't changed any settings. I have tried changing the port forward location from Switzerland to Berlin, France and Sweden with no change. If you require any logs please let me know.

Sorry it took me so long to get back to you all about this, life got busy. I've changed the audio card to another pci slot and seems like the same result. Here is the result: IOMMU group 20: [8086:244e] 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) [1102:0006] 0c:00.0 Multimedia audio controller: Creative Labs EMU10k1X [SB Live! Value/OEM Series] [1102:7004] 0c:00.1 Input device controller: Creative Labs [SB Live! Value] Input device controller [102b:0532] 0c:04.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a) Any other ideas?

Okay, i'll give it a try and let you know the results later tonight or tomorrow. Thanks for the suggestions in the mean time.

Thanks for the reply Perhansen. I changed the ACS override to "both" in the drop down menu but no change in the GUI settings for the VM, and the group appears the same to me in system devices except now it is in group 20: IOMMU group 20: [8086:244e] 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) [1102:0006] 0c:01.0 Multimedia audio controller: Creative Labs EMU10k1X [SB Live! Value/OEM Series] [1102:7004] 0c:01.1 Input device controller: Creative Labs [SB Live! Value] Input device controller [102b:0532] 0c:04.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a) Is this what you were hoping for or should something have changed? That all said, I don't think this motherboard has onboard audio.

Hi all, I am a noob, so go easy on me. I've recently installed a Creative Labs PCI Audio card into my system and was hoping to pass through to a couple of VMs. It shows up in systems devices as this: IOMMU group 11: [8086:244e] 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) [1102:0006] 0c:01.0 Multimedia audio controller: Creative Labs EMU10k1X [SB Live! Value/OEM Series] [1102:7004] 0c:01.1 Input device controller: Creative Labs [SB Live! Value] Input device controller [102b:0532] 0c:04.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a) I am not sure if this is separated correctly because the last line shows up as a graphics card option and not as a sound card option in the gui. Here are my computer specs if that helps: Model: Custom M/B: Supermicro X9SRH-7F/7TF Version 0123456789 - s/n: VM133S007866 BIOS: American Megatrends Inc. Version 3.2. Dated: 02/12/2015 CPU: Intel® Xeon® CPU E5-2650 0 @ 2.00GHz HVM: Enabled IOMMU: Enabled Cache: 512 KiB, 2048 KiB, 20480 KiB Memory: 32 GiB DDR3 Multi-bit ECC (max. installable capacity 512 GiB) Please let me know if there is any other information required to help me out. Thanks in advance.

This is exactly the point.

I find it disappointing that a developer like yourself would take these comments so personally. I imagine you have a lot invested into Unraid, but as a business you should be responding to your customers with respect and courtesy no matter how they are acting. Rather then responding in frustration, just refrain from responding. I really appreciated how ezhik responded to BennTech.

I am having the exact same problem at this very moment. Any luck with figuring out what caused it?

I've had the same problem with an asus z-170a motherboard. It seems to only have s4/s5 sleep states. Not sure if that has anything to do with it. I am a noob, so let me know what kind of information ya'll need to help me and my friend out.

Just one minor correction that I noticed. Rather than "docker exec -i -t Beets bash" it should be "docker exec -i -t beets bash"; no capital on "beets". I played around with it for a while until i figured this out. I am not sure if this was a change with more recent updates or an overlooked error, just thought I would mention it for those that have no idea what they are doing like myself.

Hi all, I am trying to set up Deluge VPN but I am having difficulty. I am using Hide My Ass VPN service. I have changed the VPN Device Type to "tap" because that is what worked for me before. Yes I did have this working in the past but I recently changed hardware and had to reinstall apps. So now I am stuck. Any help would be appreciated. Thanks.

Hi all, I'm fairly new to Unraid and the world of Linux so bare with me. I have the fix common problems app installed and it posted an error and recommended that I post my diagnostics in the forums. So here it is, please let me know if there is anything I should change or do. Here is my system: M/B: Intel Corporation - S3210SH CPU: Intel® Core™2 Quad CPU Q6700 @ 2.66GHz HVM: Disabled IOMMU: Disabled Cache: 8192 kB, 128 kB Memory: 4 GB (max. installable capacity 8 GB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: not connected eth1: 1000 Mb/s, full duplex, mtu 1500 Kernel: Linux 4.9.30-unRAID x86_64 If I missed any information please let me know. All help is welcome. tower-diagnostics-20170626-1818.zip