ich777

Just as a note it would be easier if you only replace the bz* files on the USB boot device, so youbdon't have to create a whole new stick amd copy everything back. Can you share your Diagnostics please again with everything working?

On what unRAID version are you? What exact board? Can you share your Diagnostics please?

Have you enabled Host access in the Docker settings, if not, the containers can't communicate with the Host and vice versa if you set it to br0 Sent from my C64

Sorry vorigen Post gelöscht, hatte einen Denkfehler drin. Nein, das ist nicht möglich.

This should be correct on what port did you try to connect to the container? What is not working exactly, what does the container log say?

This is completely subjective I have to say, but I never had problems with ASUS or MSI. Maybe it's also some BIOS or hardware compatibility issue...

Für Windows vielleicht aber nicht für Linux und nein, es läuft auch nicht mit WINE auf Linux. Die Developer von Astroneer haben schon vor ein paar Jahren versprochen einen raus zu bringen aber bis jetzt nicht wirklich einen Server für Linux released. Du kannst auch hier nachsehen, dort siehst du eindeutig das es den Dedicated Server nur für Windows gibt: Klick Ist für Windows soweit ich sehe. Nein, hätte ich schon ein paar mal versucht funktioniert nicht und ist die Zeit nicht wert, erst wenn die nativ was für Linux raus bringen ist das möglich, aber mittlerweile bezweifle ich das die das schaffen.

How do you try this? Did you try to put it in br0 or how did do it?

I would strongly recommend to set the DNS Server in unRAID itself to the one from your ISP or better speaking to the IP from your Router or any open DNS Server of your liking. unRAID needs exclusive access to the Internet without any blocking software in front of it.

Do you have any blocking software like PiHole or AdGuard installed in your network, if yes, try to temporarily disabling it and wait for at least 10 minutes and then try to hit the Check for Updates button again.

Only if you install the Nvidia Driver plugin, otherwise it is not installed by default. This is already possible, the plugin let you choose between the latest production branch driver, the latest new feature branch driver, maybe the latest beta driver and also the last v470.x driver, But keep in mind that the Nvidia Driver plugin is for another use case and that is if you want to utilize the card in Docker containers. You don't need the plugin if you want to use the card in a VM!

Where you able to solve the issue? From what I see in your Diagnostics you run BIOS version 5837 on your Motherboard, the latest version is 5861. Can you set the Generation for your PCIe slots? I would recommend that you set it to Gen3 or Gen2, this should have no performance impact on most cards. Do you use a GPU BIOS file in your VM configuration? If you use a driver version 465.89+ you should not need a GPU BIOS file: Click I've tried it now with my Nvidia T400 that is basically a Quadro but the Quadro line is no more. No, issue here passing it through to a Windows 10 and a Windows 11 VM with driver version 472.39. Please note that this is not my primary graphics card and the unRAID terminal uses the iGPU from my i5-10600 I don't subbed the card or bound it to VFIO, also I'm using the Nvidia Driver plugin (I generally don't recommend using the driver plugin and using the same card in a VM since this can crash the host at times if you are not really careful!).

Have you tried to click on the button on the Docker page?

Das ist ein ganz anderes Thema da ich die Temparatur hier komplett anders auslese und die Binary dafür mit meinem Plugin geliefert wird. So lese ich das aus: mget_temp -d $(lspci | grep Mellanox | head -1 | awk '{print $1}')

You should try to get a younger girl to get this going... Jokes aside, your CPU doesn't support SSE 4.1 and 4.2 and that is what the game needs, at least the experimental branch. To check that you can do 'lscpu' from a unRAID terminal and at Flags you will see the instruction sets that are supported by your CPU and you are missing 'sse4_1' & 'sse4_2', that's why the dedicated server doesn't work on your system.

Can you please post the Diagnostics from your server? What CPU are you using?

I only have a few suggestions that you can try: Enable Above 4G deconding in the BIOS Change from UEFI Boot to Legacy and vice versa, depending on what mode you are booting with now Manually set the PCIe Gen for slot one to Gen3 or Gen2 (would not make much of a difference in terms of performance for this most cards anyways) Also saw that you are using a Gigabyte motherboard from which I am not a huge fan of because they gave me also troubles in the past and also I read recently a few posts about fault Motherboards, not working/correctly working HPET timers, various BIOS issues...

Funktioniert es jetzt? Bzw. hast du neu gestartet? War nur ein Hinweis.

Sorry was missing the screenshots and the log: Satisfactory.log

So the second K1200 is not working in Windows if I understand that correctly? Have you tried this in a VM or in another physical computer? Yes but this is from your logs: Nov 8 20:13:22 aV4 kernel: nvidia 0000:01:00.0: enabling device (0000 -> 0003) Nov 8 20:13:22 aV4 kernel: nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none Nov 8 20:13:22 aV4 kernel: NVRM: The NVIDIA GPU 0000:01:00.0 Nov 8 20:13:22 aV4 kernel: NVRM: (PCI ID: 10de:13bc) installed in this system has Nov 8 20:13:22 aV4 kernel: NVRM: fallen off the bus and is not responding to commands. Nov 8 20:13:22 aV4 kernel: nvidia: probe of 0000:01:00.0 failed with error -1 Seems like your card is not responding and this means basically for the driver that it has fallen from the bus. Keep also in mind that hardware can fail over time, I don't want to say that the card is defective but I would like to keep in mind that it can happen. This should make no difference because your card is supported on the latest drivers anyways. My suggestion would be to put the card in another computer and try if it is working there, but also keep in mind that you have to install the Nvidia drivers on that other machine because the basic display output is working most of the time without a problem, only after installing the driver and putting a 3D load on it you will see if it is fully working.

Please note that this game is in pretty early alpha and don't count on everything to work, from what I've heard they got really big issues with some things and they recently broke the game entirely, but there was a fix for it that I've added to the template. This is just normal and can be ignored, the dedicated server doesn't need that files and the developers removed them to save space so the users don't have to download the whole game. This can be also safely ignored, as said above this game is in pretty early alpha and not every error message is actually an error. Please don't expect to have a issueless experience with an alpha version from the game, got many reports that conveor belts are missing/disappearing over time and so on but that has nothing to do with my container and is an issue from the game itself and there is nothing I can do about. From what I know they have an official issue tracker on their site where you can report/read all the reported bugs that are found by now. I now tried the dedicated server and it works without a problem. Can you please go in your Share settings for your appdata directory and tell me to what the setting "Use Cache" is set? Make sure that it is set to "Only" or "Prefer".

I think you are talking about the OpenVPN container? What do you mean exactly with this? This container is mainly designed from dperson to be a client only and let other container use the network from this container so that you can route your traffic through a VPN and access the WebGUI/WebInterface from your local network, you can find perfect documentation here: Click

Please post your Diagnostics, otherwise I don't have any clue what the plugin or better speaking the driver is doing.

Deswegen findest du auch keine RJ45 10Gbit/s bei mir. Es gibt BiDi, das gibt es bei Multimode nicht, sprich eine Faser für Senden und Empfangen. Ich hab einen Uplink (SM SFP BiDi) zu einem MikroTik hAP ac, in meinem Server werkelt eine Mellanox Connect X3, in den 2 PC's eine Mellanox Connect X2, dann hab ich noch einen Medienconverter (ich hab noch den alten) mit 2x RJ45 Ports, einmal einen TrendNet und dann hab ich noch einen USB zu SFP converter, verwende das Ding aber momentan nicht da es glühend heiß wird... Den einen Medienconverter hab ich deswegen für Kodi und PC in einem Raum. Der Trendnet ist fürs Wohnzimmer um diverse Geräte mit Ethernet zu versorgen (Kodi, Xbox 1st Gen, Linux PC). Kann wie gesagt auch FS.com voll und ganz empfehlen, die haben ein Lager in Deutschland und liefern extrem Schnell und vor allem haben auch was zum mechanischem Splicen (sollte ca. 30 Jahre halten). Kann dir nur sagen das ich meine Verbindung zum Server mechnisch gespliced hab, aus Gründen die ich hier nicht näher erleutern möchte... , und das funktioniert perfekt.

Hmmmm, gute Frage ob das stimmt, ich befasse mich mit dem Thema Verbrauch nicht so intensiv, was ich dir aber sagen kann das manche SFP+ Karten schon einiges an Saft benötigen. Ich hab bei mir zu Hause alles auf LWL umgerüstet und läuft alles prima, bin voll zufrieden und meine MikroTiks funktionieren auch tadellos: Was du oben auf dem Bild siehst ist ein CRS309-1G-8S und solltest du eigentlich für kleines Geld bekommen, ca. ~230,- und Lüfterlos, 8SFP+ Ports und ein 1Gbit RJ45. Du siehst hier einen Mix aus 10Gbit Multimode, 1Gbit Multimode, 1Gbit Singlemode BiDi und einem RJ45 1Gbit SFP Adapter. Wenn ich nochmal die Möglichkeit haben würde ich nur mehr Singlemode BiDi verwenden, aber da zu der Zeit als ich umgerüstet hab Singlemode noch deutlich teurer war als Multimode war die Entscheidung für mich klar. Auf dem Foto siehst du auch am 5ten SFP Modul (Singlemode BiDi) das eine Multimode Faser angschelossen ist was zwar nicht ideal ist aber auf diese Entfernung, ca 30 Meter überhaupt keine Probleme macht, bitte nicht falsch verstehen ich empfehle das nicht aber es funktioniert in meinem Fall.