Aceriz

Hey did you manage to set this up? What you describe is what I am hoping to setup

Did you end up figuring this out? I am currently working on trying to set this up as well. How did you add a new port to the ClamAV docker?

Sorry for if this is a noob question. Does this mean that through the Community applications it will be updated ? or do I have to do something specific to get it from dockerhub...

Hey I just found this. So far so great. Wondering in the Log file it says " WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.100.3 Recommended version: 0.102.2" Anyway to update this?

Hi Thanks that worked perfectly

Hey sorry if noob question. I just finished following SpaceInvaders setup. Got everything working with some modifcation But was wondering should I not be doing something to secure the OpenOfficedocument server. I can see that in Nextcloud there is a space for a secret Key but not sure where to configure this in open office... I ask as I am not wanting anyone who gets access to my onlyoffice.reverseproxy.me type of site to have access... to my docker Sorry in advance if this is a mute question due to other means of being secure.

Hey sorry if noob question. I just finished following SpaceInvaders setup. Got everything working But was wondering should I not be doing something to secure the OpenOfficedocument server. I can see that in Nextcloud there is a space for a secret Key but not sure where to configure this in open office... I ask as I am not wanting anyone who gets access to my onlyoffice.reverseproxy.me type of site to have access... to my docker Sorry in advance if this is a mute question due to other means of being secure.

Well Hopefully that is all it is. The last preclear is going to be finished probably by end of the night. Then I will reset server and see what happens at that point. Post a new diagnostic.

I upgraded a week or two ago from 6.7.2 to 6.8. No problems prior to update (other than low server space which I have rectified getting new harddrives in process of preclearing). The problem I have been getting is that I have been getting a error message saying Syslog is filling quickly. (Went to 70% within 2 days). As I am trying to figure this out I have pulled from the sys log and diagnostics. See attached. I am not sure what it means or what i should do. As I read through the syslog i keep seeing the below show up. It has various CPU listed not just "7". So not sure what is causing problem. " CPU: 33 PID: 13783 Comm: CPU 7/KVM Tainted: G W 4.19.88-Unraid #1 " I had been running preclear right now on a new drive I am planning to install to server this should be finished in next day. So can reset and post new diagnostics once done, if that clears up anything that is coming from that process. Any help would be appreciated as I am not sure exactly what is causing problem. If any additional information needed or things to test please just let me know I will do them. rizznetunraid-diagnostics-20200103-1115.zip

I have also been getting this type of error. Did you figure anything out for your yet ? ?

I upgraded a week or two ago to 6.8. No problems prior to update (other than low server space which I have rectified getting new harddrives in process of preclearing). The problem I have been getting is that I have been getting a error message saying Syslog is filling quickly. (Went to 70% within 2 days). As I am trying to figure this out I have pulled from the sys log and diagnostics. See attached. I am not sure what it means or what i should do. As I read through the syslog i keep seeing the below show up. It has various CPU listed. So not sure what is causing problem. " CPU: 33 PID: 13783 Comm: CPU 7/KVM Tainted: G W 4.19.88-Unraid #1 " I had been running preclear right now on a new drive I am planning to install to server this should be finished in next day. So can reset and post new diagnostics once done, if that clears up anything that is coming from that process. Any help would be appreciated as I am not sure exactly what is causing problem. rizznetunraid-diagnostics-20200103-1115.zip

So I am not sure how to verify this. I have configured the DuckDNS docker with my token and duckdns information. I get an initial update. But when I click either manual update I get an error saying error: ip address for myfiles.duckdns.org was already 173.66.54.159 not updated and then the time is at like 1 hour. I had previously had it setup thought it was all working but checked on it and there were things that had not updated for like 8 months, so I did a fresh install. Is there a way to ensure or verify that it works. As the 5 min thing appears to not be working.... Thanks

Hey, I am not sure where to go from here in term of problem solving my issue. Untill recently even like 2-3 weeks ago had absolutely no problems with the OpenVPN. Able to connect from my phone laptop etc. Then suddenly when I went to use it again a few days ago noticed that it was working. I know in the interm from when I last used it to when I noticed it not working there were updates to the Docker. In trying to trouble shoot I have deleted the docker, trying a simple reinstall I have also done a complete from scratch install following the SpaceInvader 2019 open vpn video. Everything looks correct, but I am unable to use the imported configure files to log in either auto login or with typed keys. Below I have the config page of the Open VPN if anyone can help me solve this would be much appreciated. I can also provide any additional information as needed. Config openvpn.pdf

Hey thanks that is wonderful,

Hey community, I am wondering if anyone knows if there is a connector cable for going from theU.2 connector on my motherboard to a standard Sata 3 6gb/sec HDD such as an seagate ironwolf drive Thanks

Hey I am hoping that someone can possibly help me out. When I set up my server originally I created it with 2 parity drives #1, and #2 each 12 TB. and 2 data Drives each 12 TB. and 2 Cache drives. When I created the array in the first place, my thought was to keep the 2 parity drives until the point when I needed the extra storage drive space then convert parity drive 2 over to a storage drive (ie thought I could pre-clear it and add it back as a data drive). I am looking right now to change over the second parity drive but want to do it correctly. When I go in to the GUI on the main page while the array is off I can select in the drop down "no device" in parity drive 2, but I can not decrease the number of drives in the array.. (is there a way to change this). And when I go to select "no device" I get errors saying parity drive missing. I have not done anything at this point as I want to do this correctly. Thanks for help

Just figure I would Post a follow-up so that if it helps the next person. In order to configure the syslinux file to include both this intel passthrough as well as my other passthrough what I did was the following With first part being the passthrough of my USB controllers. and then second part being my intel audio. and it worked. hopefully this helps someone else. kernel /bzimage append vfio-pci.ids=1b73:1100, 1b21:2142, 1b73:1100, 1b21:2142, 1b73:1100, 1b73:1100 pcie_acs_override=downstream,multifunction vfio-pci.ids=8086:a2f0 modprobe.blacklist=i2c_i801,i2c_smbus initrd=/bzroot,/bzroot-gui nomodeset

Just Wanted to give a final FYI how I solved my problem. So that it might help others. So yes do follow the recommendations from above for the Config of the mappings for the file locations. But in the setup on the first page where you are placing the listening port. You want to place the external Listening port view able on the Docker Page as 0.0.0.0 (**type this side on the listening port***) TCP --> 0.0.0.0 (internal mapping. I hope this might help others with setup problems.

Hey Thanks for the post. I am looking at getting an RTX 2080 but wasn't sure how the support with virtualization looked. Did you have to do anything in particular to get pass through to work with the USB and control on card. ? ie. any changes to vfio passthrough etc.. ? Thanks in advance.

Hey I am wondering, So I have followed through and set up all the mappings as you said through the initial settings configuation stage. I can actually then get into the Bazarr main page. But at the top it says that Bazarr needs to be restarted to apply the changes made to general settings click here to restart. But when I do that I get it stalled on a page with it just saying Bazarr is restarting Please wait.. Even after waiting for 15-20 minutes nothings changes. If I close that window and try to reload the webui I get the error saying that the site can not be reached. Any ideas, I would really like to set this up, but at a loss at what to try next. This is my Log file after waiting like 15 min on that Bazarr is resetting page. ErrorWarningSystemArrayLogin [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 10-adduser: executing... ------------------------------------- _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io We gratefully accept donations at: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-config: executing... [cont-init.d] 30-config: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. Bazarr starting... 2019-01-17 15:58:15,867 - root (14dcd2c84b88) : INFO (main:1762) - BAZARR is started and waiting for request on http://0.0.0.0:6767/ 2019-01-17 16:00:22,587 - root (14dcd2c84b88) : INFO (main:382) - Config file created successfully 2019-01-17 16:02:37,437 - root (14dcd2c84b88) : INFO (main:222) - Bazarr is being restarted... Bazarr starting... 2019-01-17 16:02:38,454 - root (1459a60bcb88) : INFO (main:1762) - BAZARR is started and waiting for request on http://192.168.0.21:6767/ Traceback (most recent call last): File "/app/bazarr/bazarr/main.py", line 1764, in <module> server.serve_forever() File "/usr/lib/python2.7/site-packages/gevent/baseserver.py", line 360, in serve_forever self.start() File "/usr/lib/python2.7/site-packages/gevent/baseserver.py", line 304, in start self.init_socket() File "/usr/lib/python2.7/site-packages/gevent/pywsgi.py", line 1450, in init_socket StreamServer.init_socket(self)

Hey great post. I am relatively still new to Unraid and still trying to understand things. Below is my ACS override on grouping that contains the intel Audio. How should I append the following to include the ACS override as well as my other device passthough (USB controllers) kernel /bzimage append vfio-pci.ids=1b73:1100, 1b21:2142, 1b73:1100, 1b21:2142, 1b73:1100, 1b73:1100 initrd=/bzroot,/bzroot-gui pcie_acs_override=downstream,multifunction nomodeset IOMMU group 25: [8086:a2d3] 00:1f.0 ISA bridge: Intel Corporation C422 Chipset LPC/eSPI Controller [8086:a2a1] 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller [8086:a2f0] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio [8086:a2a3] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller

Thanks so much Squid for fixing things:) Appreciate all the work you do for this wicked setup.

Hey fyi I would go through and try again. Might have been something down. It is now working on my comp. And I did nothing inbetween now and my post.

@Squid I am hopeful you might be able to help figure out why things are not working. I had installed the Community Applications and it was all working great for the last few months. Today I was installing a few things. Did a reset of my computer and then when I came back online the Community Applications Tab no no longer shows any significant search results example a search for "Plex" only shows 2 things.. where I know it had shown a number of things earlier today. I have tried a number of things. I have tried uninstall of community application. including clearing of plugin data on flash both current/ old. running fix common problems and CA cleaner in between with a hard reboot. Unfortunately I continue to not get a full repository of results. with no clear errors showing up. I would appreciate any help. I have attached diagnostic info to hopefully help. thanks rizznetunraid-diagnostics-20180804-1731.zip

Wondering in the old SB version to correctly copy data onto the array you would want to go under UNRAID then user then shares. In this new one just wondering as I don't see the same path but there is a path for media that then had all my created shares in it is this going to correctly use the array? And sorry if stupid question just new to unraid