idmanager

Can anybody running 8125 network driver confirm it’s running at 2500 on unraid 7.12. Every time I upgrade it’s stuck at 1000 I have even tried a fresh usb build using the usb creator and still the same issue. Never had an issue before but this is stumping me the driver looks installed and the 8169 blacklisted but the speed is stuck at 1000 downgrade to 7.01 and the speed is 2500. I don’t know what else to check back on 701 at the moment so I get full speed. The only thing I have noticed is the plug in installs the old driver even though it’s new on the GitHub. I have downloaded the GitHub but unsure how makefile works or how to install the driver ? Any help would be great. Or any other info you require I can add, always updated to the latest version but it looks like I am stuck in the past. UPDATE been looking around on net this afternoon and found a driver that's working drop the attached r8125.ko into flash/EFI/boot/extra folder then edit nano /boot/config/go and add insmod /boot/extra/r8125.ko press Ctrl+X, then Y, then Enter to save. then reboot update 2 the driver above has failed and the driver from the plug in is not for the correct linux release r8125.ko

Dropping back to 7.01 fixes my issues so I am not sure it’s the drivers issues

Having issues keep the connection at 2500 after a reboot it’s fine then after a few minutes it’s dropping to 1000 the plugin says it’s installed and I have rebooted I have swapped the Ethernet cable for three different ones all the same result. I am connected to a virgin media 5x 10gig port it was working fine until I updated to 7.1 tower-diagnostics-20250430-1014 2.zip root@Tower:~# ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full 2500baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full 2500baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: on Port: Twisted Pair PHYAD: 0 Transceiver: internal MDI-X: on Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000033 (51) drv probe ifdown ifup Link detected: yes root@Tower:~#

Hello please can anyone help with this issue, I can’t list or dir in Linux or windows. But the files are seen in Plex and still play. I have stopped the array and rebooted and restarted the array but still got the same issue the parity is saying it’s valid. this is the last bit of the latest log thanks again for any help that is given. rob sorry forgot to say the share name is Tvshows that’s showing as empty 30 13:32:15 Tower emhttpd: spinning down /dev/sdq Mar 30 13:32:15 Tower emhttpd: spinning down /dev/sdo Mar 30 13:32:15 Tower emhttpd: spinning down /dev/sdp Mar 30 13:38:13 Tower kernel: XFS (md5p1): Metadata corruption detected at xfs_buf_ioend+0xa9/0x384, xfs_inode block 0x914bcc58 xfs_inode_buf_verify Mar 30 13:38:13 Tower kernel: XFS (md5p1): Unmount and run xfs_repair Mar 30 13:38:13 Tower kernel: XFS (md5p1): First 128 bytes of corrupted metadata buffer: Mar 30 13:38:13 Tower kernel: 00000000: 8e d3 4b 0c 30 91 0d 7b 78 d9 b4 c0 41 2b 82 74 ..K.0..{x...A+.t Mar 30 13:38:13 Tower kernel: 00000010: 41 80 21 7a 14 bd be 19 44 60 b8 50 c0 16 94 01 A.!z....D`.P.... Mar 30 13:38:13 Tower kernel: 00000020: 9e 42 a0 33 c7 d7 18 dc 1f 03 b4 18 89 68 b2 ee .B.3.........h.. Mar 30 13:38:13 Tower kernel: 00000030: 86 c7 0d 21 96 09 90 03 fc f8 e7 5a 89 4c 0b 3e ...!.......Z.L.> Mar 30 13:38:13 Tower kernel: 00000040: ad 96 66 0d ef f0 95 c8 25 60 be 74 76 51 ec 2b ..f.....%`.tvQ.+ Mar 30 13:38:13 Tower kernel: 00000050: e2 5f 05 5b 0a cb f5 7b 93 0b 6e 66 eb 24 72 5f ._.[...{..nf.$r_ Mar 30 13:38:13 Tower kernel: 00000060: 3b 47 15 25 c0 0d 3a ff 96 db b0 41 21 ad e4 dc ;G.%..:....A!... Mar 30 13:38:13 Tower kernel: 00000070: 71 c9 a5 3d 61 f8 48 00 0c a1 14 ba da a2 ed 32 q..=a.H........2 Mar 30 13:38:13 Tower kernel: XFS (md5p1): metadata I/O error in "xfs_imap_to_bp+0x52/0x74" at daddr 0x914bcc58 len 32 error 117

did this ever get sorted, I am trying to do this myself

hello, I have had this case for about 2 years and always had issues with hot hd , I was going to swap to factual north xl but after seeing you 3d print would you share the STL file so I can try this before spending money on a new case thankyou rob

yes I ended up making my own docker

hello I am looking for help to install the below docker to my unraid sever, I have tried to add the git address to the repo in the setup new docker but its not working https://github.com/ivaano/NsxLibraryManager.git would be great if somebody would add it to CA I am sure other switch users would download it

Can you please show how to configure tdarr with Intel iGPU using QuickSync? I added /dev/dri as device and selected "Tdarr_Plugin_Mthr_VaapiHEVCTranscode FFMPEG VAAPI HEVC Transcode" as Plugin. But it isn't working...its just using. cpu

my docker got updated a few days ago, now its stopped working, any ideas for a fix ?

is this ever going to get added, just built a new server and its got wifi6 built into the motherboard

HI Binhex Please could i ask you to take a look at tinfoil nut-server https://github.com/blawar/nut this is a docker but just does not work on unraid, could you please work your magic and make a Binhex one, i already use some of your dockers and they work so easy without issues thanks

did you get this working, i downloaded the docker forwarded the port and added a switch image but tinfoil cant see it