chiefo

Members
  • Posts

    25
  • Joined

  • Last visited

Everything posted by chiefo

  1. Glad you were able to find a fix! I already had an email out to support who replaced my key.
  2. After two moves, I was finally able to boot my server again. Turns out my flash drive died/corrupted. Was able to successfully pull my flash backup down from the tool and get the server booted up (all though all my plugins were in an error state, manually reinstalled community apps from the file on the err folder then pulled the latest myservers plugin). Once I had the plugin I tried to replace my key, it initially errored out due to multiple keys on my flash drive, which I would have expected. I then removed the extra keys and attempted to replace my Plus License key as it no longer matched. After hitting replace key, the myservers popup briefly flashed the logon window as if I wasn't logged in, then returned to purchase/replace key. Tried in both chrome and edge. Unraid 6.9.0 and myserver 2021.10.12.1921. I moved my key from /config so I now had no valid key on the server. Now hitting replace key takes me to an actual log on attempt, which then took me to a page that says key couldn't be replaced and to contact support. I've sent an email to support to get a replacement, but it seems like the logic for replacing a key with an invalid key is causing some sort of loop. I would have expected to get the same sort of error/contact support message when replacing a mismatched key instead of the window looping repeatedly on purchase/replace key. Has anyone seen this or is it just a bug? Does the plugin have any logs I can provide to help see why it was looping?
  3. Just today noticed that a recent update seems to have broken my ability to approve requests. I've been on V4 for some time now. Basically the screen dithers and it looks like its popping up my approval button too far below the screen as I can barely see the box. Is anyone else running into this? I tried from my desktop and mobile. Also tried switching from the dev docker repo back to the stable as well to no avail. Edit: Appears to be a known issue: https://github.com/Ombi-app/Ombi/issues/4208
  4. Maybe I'm wrong but this isn't trying to change the video quality, just converting from x to y codec and possible file format. Meaning even if you ran through something that's already in the right file format and codec, it wouldn't change size.
  5. *Not sure if this can cause any issues, although I personally haven't seen any problems, perform at own risk* Stop the docker and then delete the following file from your appdata: appdata\unmanic\.unmanic\config\unmanic.db. Then restart the docker
  6. It does, but it makes the gui respond faster. It also confirms its already hevc and skips the file so its not rencoding
  7. I've seen something similar. Mine has gotten to the point twice where the page will never load when i try to view all records. I've had to blow away the database to restore functionality to that page. I can almost never get it to open an individual record even after starting with a fresh database. The entire tab locks up
  8. If its image based subs instead of text based it will fail. Mine also retry the same failures when it reopens.
  9. Yeah, Libx265 is the Cpu encoder. Change that to one of the two nvidia ones. I use nvenc_hevc
  10. Did you change the encoder under settings, Video encoding to use one of the two nvenv options?
  11. Looks like 1.16.1 is now the latest. Any chance we can get it updated to that?
  12. Thanks for confirming I'm not crazy. It happened once more after I posted. I also noticed that I could no longer access the completed tasks or the browser tab would lock up. I landed up stopping the docker and deleting the database file. Haven't seen the issue since and my history is now working better. Everything is super snappy again.
  13. Any one notice an issue where unmanic isn't transferring completed files to the drives? I notice sometimes while the worker is constantly updating the completed task lists isn't. Not showing successes or failures. Woke up this morning to my cache drive filling up and saw unmanic had over 135gb on the cache. Restarted the docker and it cleared it all out. I'm guessing its not moving it so its not getting marked as completed or failed. This doesn't happen often, but seems to have happened twice now.
  14. Stupid question but did you test it with only 2? Dont the commerical cards have a 2 stream limit unless you use a workaround? Wonder if going over the limit would slow down the entire process on the 2 left on the gpu
  15. I'll check that out in a minute. Ran lspci -v and saw it was still being stubbed. Turns out while most of the components ended in 10d<letter> there was another one still stubbed that I thought was from the wireless card I had stubbed. Servers rebooting now. *EDIT* Yeah jumped the gun. Its showing up now that i removed the 4th stub item that was hanging behind
  16. Hi All, Just recently installed this (the 6.8.3 nvidia build) for the first time and I'm getting the "NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running. " error. I have two cards, the first is a GT 240 for console access and wouldn't expect to show up, but the second card is a 1660 GTX. I previously used the card for gpu passthrough but its used far and few so I'd rather repurpose it. I removed the stub on the card and have disabled the VM manager. After rebooting I'm still not seeing the card show up in the Nvida Build settings. Is there anything else I need to disable besides the stub and the vm manager? I believe its still in the XML for the VM however I would assume with the VM manager disabled it shouldn't be holding on to the card still no? Any help is appreciated! Thanks, ~chiefo
  17. I love how easy it is to find and add new apps and dockers. I'd like to see multiple user support in the web gui in 2020.
  18. Looking for some advice. Been using telegraf and influxdb to keep stats on my unraid server for around 10 months now. I've noticed that the CPU and Ram usage of have climbed quite a bit. Is this kind of growth typical for just using telegraf on one server? Is there any kind of trimming or optimizing that should be done to keep the usage down? The entire db is only ~3gb.
  19. Great guide! I believe I have everything working correctly but I'm running into one issue. Not sure if its a letsencrypt/ngix issue or my domain. If i hit sonarr.example.com or http://sonarr.example.com the site refuses to load. Hitting https://sonarr.example.com loads perfectly. I know the setup is only supposed to work with https, but shouldn't the reverse proxy force the browser to https even if the user only puts in http? Or is there another layer of software required for that? Thanks!
  20. Thats one of two older vms I attempted to move over a while back. Neither of the two vms vdisks exist on the array anymore.
  21. Not sure if its related, but two nights ago I updated from one of the 6.5.1 rc to stable 6.5.1. I also started up a a new vm (the only vm I use). Today I came home and my server was crashed. Gui wouldn't pull up, console on server was unresponsive. No diagnostics After it came up, server ran for ~3 hours. Dockers are not responding. Tried the gui and it got stuck on a spinning page. Attempt to shutdown from the console, dockers shut down, diagnostics were pulled, console gets stuck on stopping emhttpd. I had to force reboot it after 20 minutes. Attached are diagnostics. Amd bulldozer 8150 990fx Sabertooth Anything else missing that would be useful? ~Chief alpha-diagnostics-20180503-2059.zip
  22. I just installed 6.5.1 last night and then installed all three. Pretty quick assumption that it doesn't work on 6.5.1. Any errors in the influx logs? Whats your network settings look like for your dockers?