comet424

@jinlife h like when i was running 6.12.0 no issues but then i upgraded to 6.12.1 and then 2 but i always had those hanging issues at those 2 spots with 6.12.0 and even 6.11 its been slow for a long time... so if i should try a new usb and a new unraid and install each plugin 1 at a time an ddo a reboot... to see whats causing the issue? and should i try a new install with your plugin for the network card.. to see if it deletes it and i guess the system logs show nothing whats causing these issues exactly?

maybe no one knows the answers? and why do i keep getting these errors tooo... and the array is super slow now too Jul 4 17:45:29 Tardis smbd[6176]: ERROR: smbd is already running. File /var/run/smbd.pid exists and process id 6173 is running. Jul 4 17:45:29 Tardis nmbd[6181]: ERROR: nmbd is already running. File /var/run/nmbd.pid exists and process id 6180 is running. Jul 4 17:45:29 Tardis nmbd[6180]: directory_create_or_exist: mkdir failed on directory /var/run/samba/nmbd: No such file or directory Jul 4 17:45:29 Tardis smbd[6173]: directory_create_or_exist: mkdir failed on directory /var/run/samba/ncalrpc: No such file or directory Jul 4 17:45:29 Tardis smbd[6173]: Failed to create pipe directory /var/run/samba/ncalrpc - No such file or directory Jul 4 17:45:29 Tardis nmbd[6180]: ERROR: nb_packet_server_create failed: NT_STATUS_OBJECT_NAME_NOT_FOUND Jul 4 17:45:29 Tardis nmbd[6180]: exit_daemon: daemon failed to start: NMBD failed to setup packet server., error code 13 Jul 4 17:45:29 Tardis winbindd[6207]: ERROR: winbindd is already running. File /var/run/winbindd.pid exists and process id 6205 is running. Jul 4 17:45:29 Tardis winbindd[6205]: directory_create_or_exist: mkdir failed on directory /var/run/samba/winbindd: No such file or directory Jul 4 17:45:29 Tardis winbindd[6205]: exit_daemon: daemon failed to start: Winbindd failed to setup listeners, error code 32 Jul 4 17:46:00 Tardis root: Interface "tunl0" added. Warning: no bandwidth limit has been set. tardis-diagnostics-20230705-0936.zip

@pras1011 my bad i didtn see the next page where dlandon already replied

@pras1011 the parts1 2 shows you still have a windows partitions still on it probably... click the Red X's to remove the partition or the one red X that when you slide the mouse over it will say clear disk... once you do that then you should get icon of the preclear plugin beside the hard drive ... click it and the preclear should setup.. i currently doing 2 16tbs takes about a week to do when i choose 3 cycles.... but that should get you to the preclearing

looks like its my hard drive in my array is failing not the cables ugh.. least still under warranty hopefully the syslog will show why least the one drive couldnt resume preclear they both can preclear resume now... so not sure if it will show why it wasnt resuming prior unless i reset the and start fresh again and test that way

@dlandon so i think it kinda fixed itself but i think i got sata cable error i dunno.. whats going on but here is a diagnostic before i rebooted.. as i couldnt stop the array.. then i rebooted.. started syslog and started preclear.. one hard drive let me resume other didnt then i rebooted now i can resume both drives.. but my one array disk isnt working..... and here is the 2nd diagnostic syslog-20230703-181744.txtsyslog.zipcan you tell whats wrong.. but it doebackupserver-diagnostics-20230703-1817.zipsnt solve the issue before when i gave diagnostics and it didtn show errors the resumes didnt work ... so i dunno if my logs help you or not i gotta swap in new sata cables now to see if it fixes my array.. i dont get it... backupserver-diagnostics-20230703-1809.zip backupserver-diagnostics-20230703-1826.zip backupserver-diagnostics-20230703-1817.zip syslog.zip syslog-20230703-181744.txt

this is on my main server tardis So i not sure after a clean bootup.. i still get this hanging of the udev.. and the mover error this time mover didnt hang as long... but i do have alot more errors.. whats creating them all how do i fix them etc... and fix this udev hang it takes a few min or so and i do not know why the images are side ways as i take them the same way.. tardis-diagnostics-20230703-0932.zip

@jinlife ok will do thanks for the help so far.. and glad to help in testing.. to find any bugs or glitchs etc.. anything to help improve this great software 🙂

@jinlife ok got it back up again... i wasnt able to uninstall the r8125 as it was not there in plugins page it was under the install error plugin page but i did delete the conf file in the modprobe.d and rebooted.. is there any other tests or the other driver you want me to test? and if not ill plug video card back in the main server to take pics of the screen of the 2 spots it hangs alot

@jinlife so i cant fix my k-9 server i unable to uninstall the 8125 driver on the server... its not in the plugins and its under install plugin errors tab.. i tried the delete button and then reboot but didnt help.. still no network card... how can i uninstall it... so ill try the r8169 driver then

@jinlife so i should uninstall the r8125 and install the 8169 then? as i only installed the 8125 from what you said... does the diagnostics say why tardis takes forever to boot at those or what a "RM" is that hangs least on the k-9 server.. ill try to uninstall driver to get k-9 back up and ill put vid card back in tardis and take cell phone pics of the screen... if the diagnostics dont show anything

@jinlife and i dunno if its a r8125 i only going off what you said for me to use.. from the diagnostics... or you can go by the motherboards i use i have 2 other unraids off site.. but the 3 at home are 2 x ASus Tuf X570 Gaming 1 x Asus Strik X570 Gaming board that computer has just 1 ethernet port so the 3 diganostics k-9 1 ethernet port ASus Tuf X570 motherboard Backupserver 1 ethernet port ASUS Tuf X570 motherboard tardis (main server) 1 onboard ethernet 4 (1 pci card) ASUS Strik Gaming X570 Motherboard and looks like the ethernet port is gone... but it still lit up on the back of the comp i re did it i thought it was L not an I for the attributes here is another screen shot

@dlandon if there is any other tests you need me to do ill wait till first round of preclear is done im 35 hours in step 2 is on 66% so i dont wanna take chance if any tests you need me to do going to restart back to 0 and so far no log file from the syslog server

ill reboot and check if the network card is there i re read what you wrote.. damn disylexia... ill check if the network card is there update: sorry about that i miss read so i went and did what you said and went to settings.. i guess the network card is gone dont know why these photos side ways

@jinlife i dosed off waiting for my main server to finish lol but i uninstalled driver of my main server just incase this bricking temporary my main server so i removed vid card from main server shoved a card in my k-9 server booted up... i forgot to plug in keyboard so i didnt do the gui but i did log in did a diganostics and i did a couple screen shots... and the network card did work before as i never upluged it and the lights are flickering once power comes on but here i did cell phone capture of the screen hope its good enough and on this sever it hangs on the "RM" command whatever it does but it booted up ok.. if you need me to go back into the gui mode one i will.. i just didnt when i did all these tests just the orginal boot and i dont have the vid card back in main server to test.. but i do know it hangs at the "MV" command and "udev" command sits like 5 min it seems and i not sure if those releated to the network card? i dunno if that shows those errors in the diganostics i only seen it on the screen but hope these screen shots help if you need me to go into the gui i can k-9-diagnostics-20230702-0920.zip

@jinlife once i get a video card out of my other server i can try those they busy at the moment so i cant and ill give them a try i did check pfsense for arp table and my k-9 host name not there so its not picking up but ya once i get a card in there i can run those tests

i tried deleting the driver in the plugins folder on the flash drive in my desktop pc and then plug back in to boot it up but still cant get an ip.. i have to wait a day or 2 for the one preclear to finish first round and take the vid card out of it... as i dont wanna start over

@ljm42 so are these drivers when everyone says dont use realtek you want intel drivers as linux doesnt support realtek.. all 3 servers have onboard realtek then and tardis has the 4 port card added on too.. and why is it like pfsens too its not supported realtek drivers.. yet these onboard nics have them so i installed drivers on tardis but i cant reboot yet.. its doing a btfs scrub... and backup server is doing a preclear.. and i finding that 6.12.1 .2 versions dont wanna resume the preclear.. so i dont wanna touch it so i tried on the k-9 server... i installed the r8125 you said... i rebooted the server... and no access you cant ping it i guess driver didnt work i dont have a video card in it at the moment so i cant test at the moment.. i did a 2nd reboot and didnt help... so i guess driver didnt work leastthe 8125

@ljm42 so the tardis server is my main server.. its the one really slow... its got other warnings now... its also took a long time to make the diagnostic file. the other 2 servers are my other unraids on the network.. they all got similar or different errors now .. but tardis seems to be really slow still here diagnostics of 3 servers backupserver-diagnostics-20230630-2309.zip tardis-diagnostics-20230630-2307.zip k-9-diagnostics-20230630-2308.zip

so i did the steps.. there is no log file in the share i set it save in.. but here is a diagnostic starting services takes forever to load i see now too backupserver-diagnostics-20230630-2248.zip

so i did a test let the preclear run for 15 min... with 6.12.2 and you cant resume the preclear if you do a reboot or so... so gotta make sure i dont need to reboot the server in the mean time for a week of preclearing

i dont know if its a bug or cuz i upgraded... but the preclear didnt resume after a reboot i was running 6.12.1 doing a preclear on 2 drives... i did an upgrade to 6.12.2 and then rebooted.. and thinking i could resume the preclear which i normally can.. i couldnt do it... so i just restarting preclear least only like 5 6 hours into it so not bad.. but not sure if resume will work again if i do a reboot etc

anyone know whats causing the slowness now? or how do i get those error out.. google isnt helping... i tried to delete the pid files and yet unraid still slow and errors still come up the udev and the mv mover still hangs

@Squid so i just rebooted my backup server.. it boots up faster,, only 1 nic but it has the same errors from my other server in the logs above... are they creating the slowness? they showing up on both servers backupserver-diagnostics-20230628-1551.zip

here is diagnostic.. and the other spot it hangs is the "mover" command saying directory not there or so... it sits there and hangs here is a new diagnostic and does the inifninty mean it cant read the cpu? as i know it can read my 3700x as it doesnt have this issue logs have a bunch of red erros. i seen then before i dunno what those are tardis-diagnostics-20230628-1513.zip