nekromantik

so parity check finished with 0 errors. so looks like Im good for now. attached is diagnostics after the last run. tower-diagnostics-20201003-1117.zip

if the new scan I see more errors what would you recommend? if its the SATA card issue how would I confirm?

hmm ok some time I see people posting 1 or 2 are normal. Its a brand new sata card and hard drives and I ran pre clear on it without issue.

How will I know what caused the errors? Will syslog contain errors? Can I write to array while check is running?

Nope no unclean shut down. So the correcting scheduled checks are ok? Or leave it non correcting?

thanks

anything changed? on unraid docker UI it now says not available under version.

hi all I set up a parity drive last month and set up a parity check once a month. however I was not aware you should not use correcting checks on these ones. One just finished last night and it found 8 errors. Should I be worried? Attached are diagnotics. Thanks tower-diagnostics-20201001-2220.zip

ok i will see about normal bridge mode thanks both

Not sure why iptables would block the webUI port as thats not the port thats used for downloading torrents. Yes the VPN is running fine. I did not use docker run as I just used unRaid templates. attached the images Error is it just times out when connecting to Deluge

I tried and still same issue, Its not that. To rule out the custom bridge I downloaded another Deluge container and set up in custom bridge and it worked. Sonarr and Raddar can connect. So this issue is only on the binhex ones but I prefer binhex as he includes VPN built in. this is not a issue with host this is container to container. I can access the UI fine. Bridge or custom bridge both. Its just contaner to container that does not work. All containers can connect to 8118 on this but not on 8112.

i tried and same issue so updated original post to remove that line as it happens on both settings

hi all anyone else got this running and able to connect sonarr and radarr to deluge ok? for me sonarr and radarr can ONLY connect to Deluge if I use Privoxy. It dont make sense as all containers can connect to Privoxy but nothing can connect to Deluge on port 8112.

none of the VPN ones work for me. I followed guide and copied over openvpn.ovpn file to appdata and it initiates connection but then its stuck on following messages: "Connection in progress, wait 10" it just keeps repeating. any hints?

hi all So I got a server thats running Unraid with 1 NIC. I then set up a custom bridge network but set it to same subnet mask as my LAN network. If I got containers running in the same custom bridge network then they cant seem to connect to one another. Is this normal? Do I need custom network with different subnet then my LAN?

hmm so looks like if you use custom bridge network Sonarr and Radarr cannot connect to QBittorrent. only via Provoxy can they connect to it. if you disable proxy it stops. Anyone know how to fix it so that custom bridge network works without using proxy?

anyone else got issues connecting sonarr or radarr to this? I get connection refused error. i can browse the UI but not connect to sonarr or radarr

Whats the difference between the AIO version and standard?

possible to add privoxy? so we can have 1 container that runs VPN and Torrent and also can be used as pass-through?

hi all ran pre clear on new 3TB ironwolf drive. Pre clear finished without errors but it said some attributes near thresh. For some reason the log was not saved but below is SMART attributes. Can someone please let me know if I should return the drive? # ATTRIBUTE NAME FLAG VALUE WORST THRESHOLD TYPE UPDATED FAILED RAW VALUE 1 Raw read error rate 0x000f 100 064 044 Pre-fail Always Never 0 3 Spin up time 0x0003 100 100 000 Pre-fail Always Never 0 4 Start stop count 0x0032 100 100 020 Old age Always Never 1 5 Reallocated sector count 0x0033 100 100 010 Pre-fail Always Never 0 7 Seek error rate 0x000f 070 060 045 Pre-fail Always Never 9331060 9 Power on hours 0x0032 100 100 000 Old age Always Never 28 (237 241 0) 10 Spin retry count 0x0013 100 100 097 Pre-fail Always Never 0 12 Power cycle count 0x0032 100 100 020 Old age Always Never 1 184 End-to-end error 0x0032 100 100 099 Old age Always Never 0 187 Reported uncorrect 0x0032 100 100 000 Old age Always Never 0 188 Command timeout 0x0032 100 100 000 Old age Always Never 0 189 High fly writes 0x003a 100 100 000 Old age Always Never 0 190 Airflow temperature cel 0x0022 063 062 040 Old age Always Never 37 (min/max 24/38) 191 G-sense error rate 0x0032 100 100 000 Old age Always Never 0 192 Power-off retract count 0x0032 100 100 000 Old age Always Never 1 193 Load cycle count 0x0032 100 100 000 Old age Always Never 4 194 Temperature celsius 0x0022 037 040 000 Old age Always Never 37 (0 24 0 0 0) 197 Current pending sector 0x0012 100 100 000 Old age Always Never 0 198 Offline uncorrectable 0x0010 100 100 000 Old age Offline Never 0 199 UDMA CRC error count 0x003e 200 200 000 Old age Always Never 0 240 Head flying hours 0x0000 100 253 000 Old age Offline Never 27 (194 154 0) 241 Total lbas written 0x0000 100 253 000 Old age Offline Never 10077912400 242 Total lbas read 0x0000 100 253 000 Old age Offline Never 17919685090

thanks looks like if I want 4th drive I need a sata card as ran out of ports haha

Hi all Currently got Unraid running with 2 data drives and 0 parity. I just bought a new drive for parity. Is there anything special I need to do apart from pre-clear the new drive and then mount it as parity? Thanks

is scatter the option for spreading files across drives? does it randomly choose which files to move or does it move all of them?

hi how would you do this? can you access the docker dns resolver from outside of containers?

Hi all I am still running Unraid 6.7.2 and have some problems with transferring files from my Windows Laptop via Wifi, If I use windows explorer to copy and paste it works but sometimes video files get corrupt. So trying SCP or RSync and it takes 2-3 tries to work as I keep getting broken pipes or disconnect messages. Any hints?