hocky

Members
  • Posts

    53
  • Joined

  • Last visited

Everything posted by hocky

  1. Yeah, trying a different container might be worth a try.
  2. Mh, that´s strange. Well, i´ve got 12 cores of which 5 are in use by VMs. One other docker (Ubiquiti Unifi server) is running. Overall load of the server is around or below 10% and not even half the RAM are currently utilized... Having said that, i think there must be something else...
  3. Been, there, done that. Didn´t help. Also reduced the view-distance to 6 in the server.properties.
  4. Hi, i´m trying to setup a Minecraft server for my son and his friends. Bear with me as i´m not really familiar with Minecraft and it´s terminology... The docker installed fine and we´re able to connect to the server and start playing. However, my son is reporting that the server is seriously lagging. We did a test with a friend and after a short time (2-3 minutes), the server crashed. At the server console, i´m getting messages like "can´t keep up. Is server overloaded?". I did CPU-pinning with 3 CPU cores. CPU is i7-8700 CPU @ 3.20GHz with 32GB RAM. I was thinking that should be enough for 1-2 players... Any ideas where to look at? Thanks, Hocky
  5. Hi, the docker engine on my 6.12.6 server seems to have crashed. What do i need to do to kill it so i can do a clean shutdown. I´ve had that in the past (due to a hanging MakeMKV docker) and the only soluition was to hard-reset the server requiring an array rebuild afterwards. Thanks, Thorsten
  6. I managed to have the GTX1050 show up in the VM by adding these lines to the XLM-file: <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x1'/> </hostdev> Both the GPU and the audio part show up in device manager in Windows 10 and i´m also able to install the NVidia driver for the GPU. But after reboot, the NVidia driver is obviously not loaded and the GTX1050 show up with a yellow exclamation mark. Any idea what i´m missing?
  7. Hi, i´m running a Windows 10 VM on an UNRAID 6.9.2 (registered). The VM is running a light control software which is currently using an NVidia NVS295 GPU. To be able to use all of it´s features, i would like to change the NVS295 with a GTX1050Ti, which is already installed in the server and currently assigned (and working) to another VM. Unfortunately, i´m not able to change the GPU via the UNRAID-GUI. If i do it, the VM doesn´t boot (no boot drive)... I did quite some fiddling in the past to get the initial VM running with the NVS295, so there´s a high possibility i just screwed up the configuration. Please find attached the configuration files for the VM that is working well with the GTX1050 and the one that is currently working with the NVS295. Any help how to change the NVS295 to the GTX1050Ti is much appreciated. One constraint: since the license of the software running in the NVS295 VM is tied to some sort of machine id, i can´t just setup a new and fresh VM - which i think would solve my issue easily. I need to get it fixed with the current VM. Thanks, Thorsten ELM Nvidia NVS295 VM-Konfig .txt PC-Claudia working Config mit GTX1050.txt UNRAID-system devices.txt
  8. OK, did the update. Looks good so far. 🙂 After checking everything runs normal, i installed the nvidia piece. Looks good as well, Plex is utilizing my old GTX1050Ti - tested two streams in parallell transcoding 4K incl. subtitles to an iPhone and an iPad. Nice work. 👍
  9. OK, thanks. I think i´ll give the 6.6.7 a try. How do i do the update? Using the WebGUI, i can only chose between "stable", which gives me the 6.7.2 or "next" which gives me the 6.8.0-rc1. EDIT: Got it - sorry for noise.
  10. Hi, i´m running UNRAID 6.5.3 for quite some time now to my satisfaction. However, i´d like to utilize my old GTX1050Ti for Plex hardware transcoding (Plex Pass is available) and learned, that i need to update my UNRAID server for this. I´ve read about stability issues with 6.7.x versions. So what would be a good choice for an UNRAID version between 6.5.3 and the current that is safe to use? TIA Regards, Hocky
  11. root@UNRAID:~# find /mnt/user/docker/appdata/MakeMKV/ /mnt/user/docker/appdata/MakeMKV/ /mnt/user/docker/appdata/MakeMKV/log /mnt/user/docker/appdata/MakeMKV/log/nginx /mnt/user/docker/appdata/MakeMKV/log/nginx/error.log /mnt/user/docker/appdata/MakeMKV/log/nginx/access.log /mnt/user/docker/appdata/MakeMKV/xdg /mnt/user/docker/appdata/MakeMKV/xdg/config /mnt/user/docker/appdata/MakeMKV/xdg/config/QtProject.conf /mnt/user/docker/appdata/MakeMKV/xdg/cache /mnt/user/docker/appdata/MakeMKV/xdg/cache/openbox /mnt/user/docker/appdata/MakeMKV/xdg/cache/openbox/sessions /mnt/user/docker/appdata/MakeMKV/xdg/cache/openbox/openbox.log /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/CACHEDIR.TAG /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/69c00635-d29d-4916-9d3d-e607e35c1646-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/d24edf35-e992-437d-8dd3-bcbf0ea30221-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/6f126b59-7288-461b-a110-e71ee549114e-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/4fbaf3a1-0150-4e33-9d96-6ca239a1262e-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/33181cbf-a687-43fe-ae2a-d2a18eed9e78-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/df311e82a1a24c41a75c2c930223552e-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/17090aa38d5c6f09fb8c5c354938f1d7-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/2d31a572ce6667f6a0da9c8dc611898b-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/d21dfb71-1bac-4663-948b-a39e28221c70-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/e32a6f1d-ec59-4217-bf06-f2d99b2f9b71-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/e8d985e1-a57d-4110-8033-c0ccefd70882-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/xdg/cache/fontconfig/5ca8086aeacc9c68e81a71e7ef846b3b-le64.cache-7 /mnt/user/docker/appdata/MakeMKV/data /mnt/user/docker/appdata/MakeMKV/data/_private_data.tar /mnt/user/docker/appdata/MakeMKV/.MakeMKV /mnt/user/docker/appdata/MakeMKV/update.conf /mnt/user/docker/appdata/MakeMKV/_private_data.tar /mnt/user/docker/appdata/MakeMKV/screen.conf /mnt/user/docker/appdata/MakeMKV/dump_SD_46B4F294C1B39626D2E5.tgz /mnt/user/docker/appdata/MakeMKV/Videos /mnt/user/docker/appdata/MakeMKV/myProfile.mmcp.xml /mnt/user/docker/appdata/MakeMKV/settings.conf As requested.
  12. Mh, in the meantime, i reinstalled the container and now it´s not even starting. It says "sed: couldn't open temporary file /config/sedXXXXXX: No space left on device". Need to find out what the issue might be...
  13. Hi, just updated the docker and now i only get a black screen when opening the WebUI. Before the update, it worked well for quite some months now. Any idea?
  14. So i changed the custom script command from rclone sync /mnt/user/Data/Media/Bilder /mnt/disks/HiDrive/Media/Bilder/ to rclone sync /mnt/user/Data/Media/Bilder HiDrive:users/tkhidrive/Media/Bilder/ -v A couple of test-runs look promising - i´m now down to 1m15s for a sync without changes which took 4h before. 🙂 Thanks a lot, @Stupifier, for your excellent support!
  15. @Stupifier Thanks a lot for your comment. I´ll have a look at writing directly to the cloud storage.
  16. Hi, i´ve installed the rclone plugin to synchronize a folder sitting on my UNRAID server to a cloud storage. I´m using rclone together with the user scripts plugin. The script consists of the following command: "rclone sync /mnt/user/Data/Media/Bilder /mnt/disks/HiDrive/Media/Bilder/" I´ve configured user scripts to run in every night at 2:00am. In general, everything is working (mounting, synching), both source and destination folder are in synch. However, the synch process takes almost takes 4 hours and saturates the internet connection, although nothing has changed in the source folder (so it seems to me that this is the time rclone uses just to check if there are any changes). We´re talking about ~150GB in ~40.000 files (photo archive). Any advice how this can be accelerated? Regards, Hocky
  17. Well, that´s what i would call "bad luck". Or in other words: "no arms, no cookies". As already stated above, it doesn´t make sense to build such a functionality into a server itself just for the >1% of users who try running a server infrastructure in a place not suitable.
  18. Anyone tried the "optimize" feature from Plex. As far as i understand that feature it should do some sort of converting as well. Well, my 8700-server transcodes 4K just fine. But it´s true, for the cost of the update you could get a new Fire-TV. But replacing gets more expensive when it comes to mobile devices.
  19. Hm, i can´t confirm this. I´ve got a movie folder with a 4K and a 1080p-version of a movie. It´s currently transcoding the 1080p-file for playing at my smartphone and transcoding the 4K-file for playback at my laptop. And in parallel, it does a direct play of the 1080p-file for my Fire-TV. All with subtitles showing.
  20. Ups, sorry. I was a bit confused (didn´t have my second coffee yet). Load percentage is displayed, UPS load is missing. OK, not a problem. I don´t need it in UNRAID anyway.
  21. Oh, true. That could be the reason why it´s not displayed Is it sth that can be fixed or is it just the way it is? However, the load percentage is available but also not displayed in the UNRAID status.
  22. Haven´t tried it myself, but according to the documentation, Plex should be able to handle multiple versions of a movie and use the one that fits best to the client => https://support.plex.tv/articles/200381043-multi-version-movies/
  23. Hi, i´m missing "nominal power" und "ups load" as well, although it seems as if all the details are available (see screenshots). It´s a >6 year old 1400 Rackmount ups connected via ethernet.
  24. Yes, i guess that´s because the Shield can direct play/stream from the Plex server which means no transcoding on the server is required. During playback, you can check what´s going on on the Plex server. Have a look at status=>now playing in the Plex server web interface. I guess it says "direct play/direct stream" when the Shield is playing and "transcoding" when the XBox is playing.