sittingmongoose

I am not able to get the settings in my ui to stick. Like removing power state or frequency. I tried changing temperature a few times and that part worked but the other stuff at the bottom wouldn't stick.

I am having this problem as well.

Yep! Thats what I had to do. Thank you!

Yea I get about 80 notifications from it a day, it’s extremely annoying.

Anyone got any ideas? Im getting spammed with like 40 emails on this 2 times a day.

For the last week or so I have been getting disk utilization above a certain threshold warnings. "Warning [9900K] - Disk 3 is high on usage (86%) WDC_WD100EMAZ-00WJTA0_JEGW3SKN (sdm)" for example.. however, I am getting it from every disk and they are all set to not warn me until they get to 88%, but they still are warning me. Then after 1 minute they return to normal. This happens a few times a day across all my disks. All of my shares are set to most free. And I have 3 disks that are new that still have about 3.5TB free on each too so i dont get why data is being written to my fuller disks. I attached my logs. I am running 6.8.0-rc7 9900k-syslog-20200317-1511.zip

Mines empty too

I have wireguard working well. I can connect to my unraid network, and access things like my router on that network. I set it up for Remote Access to LAN. HOWEVER, I cant access other computers on that network? Like in windows, if I try to see network devices, I cant see my unraid server on there. But I can see my local NAS and other devices. AND when I am physically on my Unraid network, I can see the Unraid server in network devices. Any help would be greatly appreciated.

I have wireguard working well. I can connect to my unraid network, and access things like my router on that network. I set it up for Remote Access to LAN. HOWEVER, I cant access other computers on that network? Like in windows, if I try to see network devices, I cant see my unraid server on there. But I can see my local NAS and other devices. AND when I am physically on my Unraid network, I can see the Unraid server in network devices. Any help would be greatly appreciated.

I posted about this plugin on reddit, got tons of people asking to be able to select which gpu is displaying. So if you have two nvidia gpus like a 1030 and a P2000, they cant choose which is shown. Think you can add that? Also, lots of requests for intel iGPU support.

Dude this is an awesome plugin!!! I love it! Works great on 6.8rc7 with my P2000. Think you could add more detail on the vram usage? Instead of just a percentage, the actual amount used/available would be amazing to have. Plex transcodes are often limited by vram so knowing that would be helpful. And, maybe as a stretch goal, the ability to customize what shows up? Like for example I wouldn't care to see clock speeds.

FYI, got the 9900k working in 6.8 RC1! with the help from someone on the unraid reddit. Nothing special was needed, I was doing it wrong.

I tried emby but that didnt work. I have handbrake but I dont know how to use it lol

I have the newest beta build. I also know my igpu is enabled because it works in my VM. I also have a display dongle plugged into the igpu as well. And i disabled my vm before i tried doing anything with plex.

Has anyone gotten 9 series igpus to use quicksync in unraid 6.8 rc? Tried following this guide and while I can ls and get the right info, plex isnt kicking to HW. I have a 9900k.

I did miss this! Thank you! All is good!

The display for where your disks are is there but all of the settings and configuration stuff is just missing.

For future people having my issue. The problem was that my network IP was the same for my remote and home network. 192.168.50.* and that's why it wasn't working on my apple devices.

I am having the same issue. None of the controls are showing. Its also not in my list of plugins. I have to reinstall it, then click the gear and I can get to it. But then its gone again after I leave the screen. Either way, no controls. It still has my configuration in there though.... Im running 6.rc1 to be clear.

Those same clients work on other wifi networks though. So I think its related to my router. I just have no idea what's causing that. Especially because other devices on that same router work fine with wireguard. And when connected to my vpn with my iPhone, I can't connect to my server but general internet works.

So I have a problem using my vpn(tried both WireGuard and OpenVPN) with my MacBook, iPad and iPhone. They work perfectly when I’m not on my WiFi. So over cellular or someone else’s WiFi, the vpn works and all is well. My server is remote, and my linux and windows computers work fine on my home WiFi with the vpn. It just seems that Apple devices don’t with my vpn and WiFi. I don’t get an error, it just says connected but it’s not. Anyone have any ideas??? WireGuard and open vpn have the same effect, I know my vpn is setup correctly and other devices work on the same WiFi.

Download the nerd pack plugin. Then from there install smartmontools. you need nerd pack to install some other things for other dockers or plugins anyway.

Added a new disk to my system , went into config and put in the disk info like location and comments. Saved it, and now it wont load again. I am getting this error. Warning: SQLite3::query(): Unable to execute statement: database is locked in /usr/local/emhttp/plugins/disklocation/pages/system.php on line 62 Fatal error: Uncaught Error: Call to a member function fetchArray() on boolean in /usr/local/emhttp/plugins/disklocation/pages/system.php:64 Stack trace: #0 /usr/local/emhttp/plugins/disklocation/pages/devices.php(215): get_tray_location(Object(DLDB), '27889af0e523973...') #1 /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(432) : eval()'d code(4): include('/usr/local/emht...') #2 /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(432): eval() #3 /usr/local/emhttp/plugins/dynamix/template.php(62): require_once('/usr/local/emht...') #4 {main} thrown in /usr/local/emhttp/plugins/disklocation/pages/system.php on line 64