luca2

+1 Sent from my NX569J using Tapatalk

Hi, want to ask if anyone knows how to make it available in unraid latest stable. Basically it converts virtual machines (VMware) in KVM. Sent from my NX569J using Tapatalk

Forgot to ask how to decompress this file .zst?

ok thx. I just re-run the script and now I get this ... definitly a space saver!

Hi, where do I find this option your pic shows? I am running just the script (JTOK) and don´t have this option neihter remember to see it somewhere else.

Hi, I wish someone confirms to me if everything is fine with my backup. This is my config: 2020-07-24 08:41:41 information: send_notifications is 1. notifications will be sent. 2020-07-24 08:41:41 information: only_send_error_notifications is 0. normal notifications will be sent if send_notifications is enabled. 2020-07-24 08:41:42 information: keep_log_file is 1. log files will be kept. 2020-07-24 08:41:42 information: number_of_log_files_to_keep is 1. this is probably a sufficient number of log files to keep. 2020-07-24 08:41:42 information: enable_vm_log_file is 0. vm specific logs will not be created. 2020-07-24 08:41:42 information: backup_all_vms is 0. only vms listed in vms_to_backup will be backed up. 2020-07-24 08:41:42 information: use_snapshots is 0. vms will not be backed up using snapshots. 2020-07-24 08:41:42 information: kill_vm_if_cant_shutdown is 0. vms will not be forced to shutdown if a clean shutdown can not be detected. 2020-07-24 08:41:42 information: set_vm_to_original_state is 1. vms will be set to their original state after backup. 2020-07-24 08:41:42 information: number_of_days_to_keep_backups is 0. backups will be kept indefinitely. be sure to set number_of_backups_to_keep to keep backups storage usage down. 2020-07-24 08:41:42 information: number_of_backups_to_keep is 0. an infinite number of backups will be kept. be sure to set number_of_days_to_keep_backups to keep backups storage usage down. 2020-07-24 08:41:42 information: inline_zstd_compress is 1. vdisk images will be inline compressed but will not be compared afterwards or post compressed. 2020-07-24 08:41:42 information: zstd_level is 3. 2020-07-24 08:41:42 information: zstd_threads is 2. 2020-07-24 08:41:42 information: use_snapshots disabled, not adding snapshot_extension to vdisk_extensions_to_skip. 2020-07-24 08:41:42 information: snapshot_fallback is 0. snapshots will fallback to standard backups. 2020-07-24 08:41:42 information: pause_vms is 0. vms will be shutdown for standard backups. 2020-07-24 08:41:42 information: enable_reconstruct_write is 0. reconstruct write will not be enabled by this script. 2020-07-24 08:41:42 information: backup_xml is 1. vms will have their xml configurations backed up. 2020-07-24 08:41:42 information: backup_nvram is 1. vms will have their nvram backed up. 2020-07-24 08:41:42 information: backup_vdisks is 1. vms will have their vdisks backed up. 2020-07-24 08:41:42 information: start_vm_after_backup is 0. vms will not be started following successful backup. 2020-07-24 08:41:42 information: start_vm_after_failure is 0. vms will not be started following an unsuccessful backup. 2020-07-24 08:41:42 information: disable_delta_sync is 0. rsync will be used to perform delta sync backups. 2020-07-24 08:41:42 information: rsync_only is 0. cp will be used when applicable. 2020-07-24 08:41:42 information: actually_copy_files is 1. files will be copied. 2020-07-24 08:41:42 information: clean_shutdown_checks is 20. this is probably a sufficient number of shutdown checks. 2020-07-24 08:41:42 information: seconds_to_wait is 30. this is probably a sufficient number of seconds to wait between shutdown checks. 2020-07-24 08:41:42 information: keep_error_log_file is 1. error log files will be kept. 2020-07-24 08:41:42 information: number_of_error_log_files_to_keep is 10. this is probably a sufficient error number of log files to keep. And this is the attempt to backup one of the vm´s: 2020-07-24 08:41:42 information: c3po can be found on the system. attempting backup. 2020-07-24 08:41:42 information: creating local c3po.xml to work with during backup. 2020-07-24 08:41:42 information: /mnt/user/backup/unraid/vm/c3po exists. continuing. 2020-07-24 08:41:42 information: copy of backup of /mnt/user/backup/unraid/vm/c3po/20200422_1928_vdisk1.img vdisk to /mnt/user/backup/unraid/vm/c3po/20200724_0841_20200422_1928_vdisk1.img starting. 2020-07-24 08:51:28 information: copy of /mnt/user/backup/unraid/vm/c3po/20200422_1928_vdisk1.img to /mnt/user/backup/unraid/vm/c3po/20200724_0841_20200422_1928_vdisk1.img complete. 2020-07-24 08:51:29 information: skip_vm_shutdown is false. beginning vm shutdown procedure. 2020-07-24 08:51:29 information: c3po is shut off. vm desired state is shut off. can_backup_vm set to y. 2020-07-24 08:51:29 information: actually_copy_files is 1. 2020-07-24 08:51:29 information: can_backup_vm flag is y. starting backup of c3po configuration, nvram, and vdisk(s). 2020-07-24 08:51:29 information: copy of c3po.xml to /mnt/user/backup/unraid/vm/c3po/20200724_0841_c3po.xml complete. 2020-07-24 08:51:29 information: c3po does not appear to have an nvram file. skipping. 2020-07-24 08:54:47 information: copy of /mnt/cache/domains/c3po/20200422_1928_vdisk1.img to /mnt/user/backup/unraid/vm/c3po/20200724_0841_20200422_1928_vdisk1.img.zst complete. 2020-07-24 08:54:47 information: backup of /mnt/cache/domains/c3po/20200422_1928_vdisk1.img vdisk to /mnt/user/backup/unraid/vm/c3po/20200724_0841_20200422_1928_vdisk1.img.zst complete. 2020-07-24 08:54:47 information: the extensions of the vdisks that were backed up are img. 2020-07-24 08:54:47 information: vm_state is shut off. vm_original_state is shut off. not starting c3po. 2020-07-24 08:54:47 information: backup of c3po to /mnt/user/backup/unraid/vm/c3po completed. 2020-07-24 08:54:47 information: number of days to keep backups set to indefinitely. 2020-07-24 08:54:47 information: number of backups to keep set to infinite. 2020-07-24 08:54:47 information: removing local c3po.xml. Now, I get this output in my backup folder: It seems everything works as axpected although I have not tried to recover my vm using the backup file (vdisk) yet. What do you think? What is actually the .ZST file. I see the actual vdisk of the vm (20200724_0841_20200422_1928_vdisk1.img) and the associated ZST file, but do not understand their relationship and how should be the vm restored (if I need to)...will it work just copying over to the vm the 20200724_0841_20200422_1928_vdisk1.img?

Thx@squid , will have a look at this. Sent from my NX569J using Tapatalk

I am still not sure -since there is no specific mention of bifurcation- if it will work with anything, I mean not only a raid setup but for example just sharing a 2 x4 nvme and a x8 gpu. Still debating about this route or the proven x399 Thx for sharing this info. Sent from my NX569J using Tapatalk

Hi, some owner of the Asus X570 WS Pro-Ace could check the bios and confirm to me if pci-e slot1 (PCIEX16_1) can be splitted (bifurcated) in bios to x8x4x4 or to x8x8? As here is mentioned it is not possible, just want to double check https://www.asus.com/us/support/FAQ/1037507 Also, what are the options for PCIEX16_2 and PCIEX16_3 ...only x8x8?

Hi, just read the whole posts and still have one doubt, hope someone can explain it. The situation is: I have in unraid´s CACHE one ssd running several vm´s. One of these vm´s is running windows and gets infected. My doubt is: will the other vdisks get infected (encrypted) too since they reside in the same disk (cache)? Also, just to double check, regarding all accessible shares within the infected windows vm, if they are accessible they will be encrypted. I understand that. But what about other shares that are not accessible to this vm. If the windows vm can access i.e. a share called movies, and movies also resides on a disk that contains other shares (not accessible by the windows vm)...will all this shares be encrypted too?

@Pducharme maybe you can confirm this to me regarding Asus X570 WS Pro-Ace .... On slot1 available for pci-e, it is rated as x16 in single, could it be splitted (bifurcated) in bios to x8x4x4 ? As here mentioned it is not possible, just want to double check for future proof extension options..https://www.asus.com/us/support/FAQ/1037507 Sent from my NX569J using Tapatalk

Hi, It would we great if anyone can confirm which GPU will work as primary GPU running in pci-e 3.0 x16 and being passthroughed. I am looking for a "cheap" GPU ... in the range of nvidia 1660 or similar. Just want to avoid the mistake I did years ago with the gt610. Sent from my NX569J using Tapatalk

Hi, I tried the unraid openelec vm template. It works great. I checked the available version in openelec (8.0.4). The one in unraid template is 6.0.3. Anyone can confirm how to upgrade to the latest stable? Sent from my NX569J using Tapatalk

Hi, I want to try the unraid openelec template. I checked the available version in openelec (8.0.4). THe one in unraid template is 6.0.3. Anyone can confirm if I install the 6.0.3 I can upgrade (and how) to the latest stable. Rgds

Thx for pointing me in the right direction. When it says: "Modify the as.conf file under config/etc and replace the line boot_pam_users.0=admin with #boot_pam_users.0=admin boot_pam_users.0=kjhvkhv" ... just to be sure: "kjhvkhv" should be my new created user (with admin rights)? thx in advance for support.

hi, a simple question that I cannot solve...I just installed the docker on unraid 6.8.3. how can the password of the admin be changed? I tried changing it in user permissions but it is actually not done and I can still login with default "password".

Thx for clarification!

Hi, I am running 6.8.3 and want to passthrough a whole ssd to a vm. Before I proceed acording spaceinvader´s video, I want to make sure the precedure is: -enable the option PASS THRU in UD? -then put this line in my vm xml: /dev/disk/by-id/ata-TOSHIBA-TL100_X6PYTUYTUKEU It´s a while since I don´t have a look a UD and can´t remember if this option was already there long ago. But yesterday I noticed that after I enabled pass thru in UD I loose the option to mount the disk in UD. I guess this is what is intended to pass through ths disk properly. Hope someone can confirm this to me. Thx in advance.

Hi, I am running 6.8.3 and want to passthrough a whole ssd to a vm. Do I need to enable this option (PASS THRU) in unassigned devices? I already will put this in my vm xml hdd: /dev/disk/by-id/ata-TOSHIBA-TL100_X6PYTUYTUKEU I noticed that after I enable this option (pass thru) in UD I loose the option to mount the disk in UD. Just want to make sure the function of this option. Rgds.

Thx for the info. I finally did setup a whitelist. Have been testing it and it works fine. Also, I was testing assigning different op. Just to be able to execute commands ingame. Also tested if a new player can access any commands without being op. Finally, I thought about using let's encrypt to allow friends to access my minecraft server. Haven't got time yet to study it. Anyone has tried this? Enviado desde mi HMA-L29 mediante Tapatalk

Solved: natted 443 was set to udp and not tcp. Enviado desde mi HMA-L29 mediante Tapatalk

Pls can you tell us how to do that? Also, since my son is "experimenting" with the ingame console commands and I have clue what can be altered there, what should I remark to him not to change in order to avoid any possible security holes if the server is opened to the outside world? Enviado desde mi HMA-L29 mediante Tapatalk

Hi saarg, first thing thx for your support. I finally had to spend some time to learn about the basic concepts to setup a domain (host, subdomain, A record, Ddns, Cname,...). I know now the problem was due to a wrong config in my domain at namecheap. Now it is working. Anyway I managed to implement a script in my router so that my IP is updated even with unraid powered off. In case anyone is interested in it let me know.

Hi again, Have been really busy trying to setup Jitsi. I realised the first thing I had to do is learn about host, subdomain, A record, Ddns, Cname, ... So finally I deleted everything and started from scratch. I also bought a domain and heve been setting it up. Now I can ping my unraid from the wan and I get the right IP. Also, Letsencryt is finally working again. I managed to connect to my jitsi docker from a laptop in the wan by typing http://meet.mydomain.com. But When I try https://meet.mydomain.com it is not working. I checked that I can connect to any https web with my browser. Also that my NAT rule is active for unraid_ip ports 443(wan)>1443(lan) . But if I use a web portal to check for open ports, I get "Port 443 is closed". I looked at the logs and found in Portainer this: 2020/05/19 19:37:00 http error: Invalid JWT token (err=Invalid JWT token) (code=401) Any idea what is causing this?

Ok. I understand that about ports. But dont understand how it is assigned 172.17.0.2 instead of 192.168.1.40. ddclient network_type=bridge, so it should have this ip 192.168.1.40? Also, I get this error in ddclient log: WARNING: cannot connect to dynamicdns.park-your-domain.com:80 socket: IO::Socket::INET: Bad hostname 'dynamicdns.park-your-domain.com' ddclient updates (as I can confirm in the docker log) the right wan IP, but how can I check it is connecting to namecheap and sends it to namecheap?