TeKo

Is there a way to use this with an intel iGPU?

I added both variables to my config and set the permissions. Looks like the error is gone. Thanks a lot.

I'm getting this error: Is there something I can do to fix this?

Did you change anything else? Im on a 12500, using linuxserver PLEX with extra parameters = --device=/dev/dri:/dev/dri and "i915.force_probe=4690" added to my Syslinux configuration. Not really working with 4k (tonemapping on and off).

Same problem here, trying with disabled auto fan right now.

Is the GoogleMusicManager not working anymore? Im getting "Can't connect to Google Play". I dont think there is a solution for Youtube Music yet, at least I wasnt able to find one.

Hmm... looks like the version was the problem. Showed all other containers as offline even tho I was able to ping them. Went back to 1.7 and everything works fine even with a custom network. Edit: After everything was working I updated to latest again and it seems to work now... no clue whats happening here

I tried to switch to a custom bridge network, so I can use static ips for my containers. (Had problems with the ips changing and having to remap the containers in the manager) That wasn't working so I tried to go back to the default Bridge but now I cant get it to work. I removed the docker and deleted the appdata folder but its still not working. Im testing with a nzbget container but im only getting "ERR_EMPTY_RESPONSE" when trying to connect using the dyndns domain.

Yea I tried that, still not really working, but Im going to ask on github. Just thought maybe someone here got it to work with subfolders.

There is a subdomain config (I think that wasn't there when I first tried), so its still not working with subfolder? I tried with another docker before and couldn't get subfolder to work even tho they have a prefix or whatever in their settings.

Anyone got this to work with letsencrypt nginx reverse proxy?

Wow thats a nice board, not sure why the use mATX for their server boards tho. But way too expensive. There are a few boards that would fit my needs but I dont really know if ECC really works and if they boot without a GPU. Might just buy an Asrock or Asus board to test, I heard they are the best for ECC and headless setup.

Expensive and I dont really want an mATX board. I hope the release some more boards maybe with B550 or something.

Mine are connected to the board too. I installed the temp plugin sometime ago but I think I needed nerd pack to install perl to get it to work after that autofan just worked. I think I used this: https://wiki.unraid.net/Setting_up_CPU_and_board_temperature_sensing

Did you install System Temperature and Nerd Pack too? Not sure you need it but I had both installed before I installed Autofan.

Dynamix System Autofan from Community Applications! I switched from my case fan controller to onboard 4-Pin and it works great all my PWM fan run at ~10% until one of my HDDs gets above 35°C. I have all of my fans connected to a single connector and set fan speed in the bios to full speed.

Hey, Im planning to buy a 3700x to upgrade my Unraid Server but Im having difficulties finding the right board for my needs. What I need: 3x PCIe x16 (2x 3.0, 1x 2.0) for HBA, 10G NIC and maybe a GPU later ECC support: 16GB Samsung B-Die (starting with one, getting more later) Headless Boot All this as cheap as possible For the PCIe Slots I probably need an X chipset, so Im looking at X370 and X470. (Dont need PCIe 4.0 and want to save some money and power)

Thanks, looks like the EOLs were the problem.

Is there anything special I have to do to get Start Scripts to work or should a script that works as a UserScript just work? Its says: Executing custom start script But its not running or at least not doing what it should. The script syncs the backup to google drive and works fine when I just start it from user scripts.

I was planning to get something similar to upgrade my build, but I decided to wait for Zen2, but I dont think you are doing something wrong with a Ryzen 2 Build right now. Its pretty hard to find out which board works headless but it seems to work with most Asrock boards (also seems to work the best with ECC) and with pretty much no MSI board. One problem with Ryzen for me are the PCIe Slots on the boards, you can get 3x 3.0 (x16 mechanical) on a pretty cheap Intel Board but for AM4 you have to get an expensive board just to get 2x 3.0 1x 2.0.

I love my XL R2, I removed the 5.25" Cage, bought another 4 Drive Cage from Fractal and stacked the 3 on top of each other and the 2 drive cage from my Define C Mini on the bottom next to it. So now I have 14 trays. You could probably get 2 more 4 drive cages and stack the next to the others to get a total of 20 drives.

Obviously new hardware is not using DDR3. I have no problem buying something used. Xeon E3 v3s look kinda nice, especially the L versions but they are super expensive. Was just hoping for some combo suggestions with a passmark score around 6-10k.

Hey, Im looking for a budget UNRAID build. I want to use it for Plex (1080p x265/x264 and 4k in the future) and some Dockers (maybe a VM for testing). What I have: Drives SSD (Can I use the same SSD as cache, my Plex library and other stuff?) Controller: M1015 (flashed) Case: Define XL2 PSU (Thinking about getting a new one or switching with my Desktop PSU) CPUs + Boards 1055T fx-8350 A6-3500 Some DDR3 sticks. So, Im thinking about getting a new CPU+Board because the ones above are not really what I want to have running 24/7 (and the A6 is just too weak). Im not really transcoding but it should still be able to handle 1-2 streams but the main goal for it is to be power efficient. If I was able to use DDR3, that would be great