dikkiedirk
Members-
Posts
2,255 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Everything posted by dikkiedirk
-
I still have an EX490 that is my first unraid experience. Just put an unraid stick, that I prepared on my laptop, in one of the USB-ports on the back and it booted without a problem. Never changed a BIOS-setting. Even 3 TB drives worked, and the eSATA-port too. I had a Sans Digital TR5M on it and all five drives worked as data and cache drives. The server was upgraded with an E5800 CPU and 4 GB DDR2.
-
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
I'd like to flash a M1015 on a X9SCM-F, but so far no succes. I tried EFI-shell for the sas2flash part. I can do the first 3 steps of the Madburg zip. But the 5it step just gives and error about chip in reset state and attempting host boot failed. Can someone please help? -
Does Gigabyte GA-Z68XP-UD4 Motherboard Support VT-d ?
dikkiedirk replied to geekette's topic in Motherboards and CPUs
I hope you are not getting for unraid only. It would be a total waste. And remember: there always will be something better, faster in over a year. -
Does Gigabyte GA-Z68XP-UD4 Motherboard Support VT-d ?
dikkiedirk replied to geekette's topic in Motherboards and CPUs
Can you download the manual or contact Gigabyte? There should be settings in the BIOS. -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
The card had the original IBM M1015 firmware on it and was erased. Now when I try to flash the IT firmware (P11) I get the error shown above. -
The 5X3 Cage review - Norco, SuperMicro, iStarUSA and Icy Dock
dikkiedirk replied to Whaler_99's topic in Hardware
If your Zalman case is like most other cases, these rails are simple punch-outs and folds of the steel side panels - you should bend them flat before attempting to install your drive cages. The normal method for unRAIDers, is to use a large G-clamp to flatten them. If you look back up this thread, you can see my photo with the clamp in action. Do all 12-bay cases need this flattening-procedure? Or are there cases that can do without? -
The 5X3 Cage review - Norco, SuperMicro, iStarUSA and Icy Dock
dikkiedirk replied to Whaler_99's topic in Hardware
How tight is the fit? Can't these rails be removed? -
The 5X3 Cage review - Norco, SuperMicro, iStarUSA and Icy Dock
dikkiedirk replied to Whaler_99's topic in Hardware
Are these rails for 5,25" all the way from top to bottom or just in the upper compartment? How many cse-35t are you using in the ms-1000? -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
Hi, Can you please exactly describe how you did that. Which BIOS version? Which sas2flash.efi version. I have a X9SCM-F but keep getting a chip is in RESET state, trying to boot host error. -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
-
Will the Zalman Ms-1000 hold the CSE-M35T 5in3? Will 3 of them fit?
-
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
Which sas2flash.efi version and which X9SCM BIOS do you use? -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
Succes! I just flashed 2 M1015 cards to IT mode with madburgs scripts using a EVGA X58 Classified. Which firmware does the LSI 2008 need for 3 TB support and how to update to this new firmware? Can such a update be done on any motherboard and possibly in a unraid/slackware telnet session? -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
The DFI LT X38-T2R does. You have to look on ebay though. -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
Is there a workaround yet for supposedly non-working motherboards? Or is the only option finding another motherboard? -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
I use 5.0b12a. The m1015 was flased with madburgs files -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
A8N is NVIDIA based. I read a post from someone who had to use a board with a nvidia chipset to do the flashing. Might give it a try! thanks to Roancea: On a side note, it makes you feel great having 3 current systems not able to finish this flash and having to drop back to an old finicky nvidia based motherboard running a C2D to get the job done =) -
That PSU has 70A on a single +12V rail. It is way more than you need for just 10 drives. Factor in 2A for each green drive and 3A for each 7200 RPM drive, then leave 3-5A for the motherboard and fans. That PSU can support up to 21 7200 RPM drives, or up to 32 green drives. Talk about overkill! Yes, you are right. But I can have it here in Holland cheaper then the Seasonic X-760 or X-850. So, what makes the X-series so special? Is it just 80plus Gold vs. Bronze? Besides I also want room to grow. 70x12=840W for a 850W PSU? And what about the 3.3V, 5V and -12V lines?
-
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
J guess I was lucky then. Succeeded on the first attempt. Maybe it helps to disable onboard hardware to free up some resources, but I'm no expert on this. -
Is this ok for 10 drives initially but with room for growth? Sorry, it's a Dutch site. https://maxict.nl/product/3326779/seasonic-netzteil-atx-850w-seasonic-80plus-bronze-m12ii-850am?ics=ls
-
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
My motherboard doesn't have a PCIe 8x slot. So I will put my M1015 in a 16x slot. Is there a way to check if the card is running at 8x? Or will the card simply not work when it falls back to 4x? -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
I just flashed my M1015 using the same ZIP-file. And I must say that thanks to the work of madburg it is as easy as counting from 1 to 6. I used an DFI LT X38-T2R motherboard for it without any problem. I also didn't notice the PAL-error you mentioned. -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
I hear ya. I sat on my card until I had the time to read the entire thread. I like to understand since i need to support my system. I just recently flashed my m1015. I can telll you it Marburg's file worked great. I even customized the last script for my own environment. Did you use: 20.10.1-0037 (APP-2.120.54-1235) / 15-APR-11 Only iMR mode available. LSI MegaRAID SAS2008 Controller.zip - 5.32 MB (Windows) or, did u use: Update: Convert your LSI MegaRAID controller card with LSI SAS2008 chipset to a Plain SAS2008 controller card (IT or IR mode), will look and feel like a LSI SAS9211-8i, and will be ready to use with unRAID (BIG THANKS to KKM for creating the empty.bin, so you dont need to have to worry about which sbr to obtain and use.) 1) IBM ServeRAID M1015 (tested successfully) 2) Intel RS2WC080 (tested successfully) Please let me know (PM or post here) what Card you have successfully flashed with the LSI MegaRAID to SAS2008 with the provided zip. LSI MegaRAID to SAS2008(P10).zip - 6.38 MB (DOS, via bootable usb key) LSI MegaRAID to SAS2008(P11).zip - 5.87 MB (DOS, via bootable usb key) More specifically: Did you use P10 or P11, or both? Are any further steps needed? -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
Ok, well I just got a little confused reading through this thread, didn't know where to start. Also because after the madburg posts in the beginning of this thread there were some problems reported. It seemed that the kkm method was the way to go. Maybe this thread needs a bit of cleaning up and stream-lining to make it a little easier to find what one needs to do to flash a specific controller, in my case a M1015, for use in Unraid. Don't see this as criticism. I thank you guys a lot for doing all this. -
LSI Controller FW updates IR/IT modes
dikkiedirk replied to madburg's topic in Storage Devices and Controllers
proper? Wouldn't proper use the bios provided by IBM. Is it the only way? not at all. I just did mine using the zip madburg posted. I think its in the 2nd or 3rd post of the thread. I mean proper for use in Unraid. I don't think using an IBM bios is the right way. Will both the madburg and the kkm method lead to the same result. Or is there a "better" method? Either madburg or kkm?