bubiman

Danke für deine Hilfe. Hab jetzt die Grenze auf 30GB erhöht. Mittlerweile habe ich auch nicht mehr die ioBroker im Verdacht, der scheint nur "Opfer" eines anderen Dockers geworden zu sein

Thanks, I have installed netdata and will look into it once it crashed again

Ok da hab ich das dann falsch verstanden, ich hoffe das hier ist die gesuchte Info. Demnach ist es noch nicht voll aber fast. Wie und wo kann ich denn diese 20GB vergrößern?

There is no parameter set to limit the RAM amount: This also suggests that RAM is not limited:

Ne, der ioBroker braucht zZ 2.5gb RAM und alle Docker zusammen überschlagen ca. 11gb RAM Hm oder ich verstehe die Anzeige im Dashboard falsch. Laut der Grafik Ist ja kaum noch RAM frei

Hallo, ich habe jetzt zwei mal einen "Out of memory" Fehler durch die ioBroker bekommen: Jun 20 17:30:10 Tower kernel: Out of memory: Killed process 18001 (iobroker.js-con) total-vm:32983268kB, anon-rss:21616508kB, file-rss:0kB, shmem-rss:0kB, UID:99 pgtables:49380kB oom_score_adj:0 Eigentlich sollte Unraid mit 32gb RAM genug Speicher haben. Der ioBroker Docker scheint auch bzgl RAM nicht begrenzt zu sein. Wenn ich jetzt in Unraid schaue sind nur ca. 30% der 32gb in Benutzung. Hat jemand eine Idee was ich versuchen könnte um den Fehler genauer einzugrenzen oder zu beheben?

I found the docker that is causing the problem: but right now I don´t know why this problem occurs. There seems to be pleanty RAM available

Is there anyway to see wich container causes the problem? Yesterday I got the same error again "Out Of Memory errors detected on your server". The docker tab suggest, that there is no max memory allocation set: Every docker seems to have the whole 32gb available

Thanks for your answer. I will reboot the server and monitor if this is happening again

... and I forgot to include the diagnostics

Hi, I have to admit, I am not checking my unraid server on a daily basis. Today I saw a red error from the "FIX COMMON PROBLEMS" Plugins: Out Of Memory errors detected on your server I have not noticed any malfunction from the server and do not know what to do except the recommended reboot of the server from this post: Should I check or do somthing else before rebooting?

Thanks for your answer ... it is working without special characters

Hi, I am having problems mounting an encrypted USB drive. I activated the destructive mode, deleted all partitions, formated the drive with xfs-encrypted ... that all went well: Jan 5 20:07:00 Tower unassigned.devices: Removing partition '1' from disk '/dev/sdb'. Jan 5 20:07:55 Tower unassigned.devices: Format device '/dev/sdb'. Jan 5 20:07:55 Tower unassigned.devices: Device '/dev/sdb' block size: 5860533168. Jan 5 20:07:55 Tower unassigned.devices: Clearing partition table of disk '/dev/sdb'. Jan 5 20:07:55 Tower unassigned.devices: Clear partition result: 1+0 records in 1+0 records out 2097152 bytes (2.1 MB, 2.0 MiB) copied, 0.013233 s, 158 MB/s Jan 5 20:07:57 Tower unassigned.devices: Reloading disk '/dev/sdb' partition table. Jan 5 20:07:57 Tower unassigned.devices: Reload partition table result: /dev/sdb: re-reading partition table Jan 5 20:07:57 Tower unassigned.devices: Creating Unraid compatible gpt partition on disk '/dev/sdb'. Jan 5 20:08:00 Tower kernel: sdb: sdb1 Jan 5 20:08:00 Tower unassigned.devices: Create gpt partition table result: Creating new GPT entries in memory. The operation has completed successfully. Jan 5 20:08:02 Tower unassigned.devices: Reloading disk '/dev/sdb' partition table. Jan 5 20:08:02 Tower kernel: sdb: sdb1 Jan 5 20:08:02 Tower unassigned.devices: Reload partition table result: /dev/sdb: re-reading partition table Jan 5 20:08:02 Tower unassigned.devices: Formatting disk '/dev/sdb' with 'xfs-encrypted' filesystem. Jan 5 20:08:11 Tower unassigned.devices: Format drive command: /sbin/mkfs.xfs -f '/dev/mapper/format_sdb' 2>&1 Jan 5 20:08:26 Tower unassigned.devices: Format disk '/dev/sdb' with 'xfs-encrypted' filesystem: meta-data=/dev/mapper/format_sdb isize=512 agcount=4, agsize=183140635 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=0 = reflink=1 bigtime=1 inobtcount=1 data = bsize=4096 blocks=732562537, imaxpct=5 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1 log =internal log bsize=4096 blocks=357696, version=2 = sectsz=4096 sunit=1 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 Jan 5 20:08:29 Tower unassigned.devices: Reloading disk '/dev/sdb' partition table. After that I set the password for the drive in the UNASSIGNED DEVICES settings: Jan 5 20:09:03 Tower ool www[25856]: /usr/local/emhttp/plugins/unassigned.devices/scripts/rc.settings 'set_pass' and hit the mount button on the main tab and it is not working: Jan 5 20:27:22 Tower unassigned.devices: Adding partition 'UnraidBackup1'... Jan 5 20:27:22 Tower unassigned.devices: Mounting partition 'UnraidBackup1' at mountpoint '/mnt/disks/UnraidBackup1'... Jan 5 20:27:22 Tower unassigned.devices: Using disk password to open the 'crypto_LUKS' device. Jan 5 20:27:25 Tower unassigned.devices: luksOpen result: No key available with this passphrase. Jan 5 20:27:25 Tower unassigned.devices: Partition 'IB-1122- U3' cannot be mounted. Does anyone have an idea what I am doing worng? Thanks for your help

Thanks for your help. I have read that but it seems that the information was not processed by my brain 🙄

The only thing I changed was the "Database Provider" value:

Hello, when starting the docker it stops with the following error: I have not tried to use my maria DB but does anyone know what I could try to fix this problem with sqlite? Thanks for your help

Thanks for your follow up. I had given up on using encryption with unraid but I will look into turning of QAT through BIOS and try it again. bubiman

To give an update (I hate to find a topic describing a problem but there is no final post): The old USB stick is unsavable. No matter what I have tried, it remaind "write protected". I prepared a knew USB stick with the Unraid USB creator and after that was finished I copied my backup over the files. That was not working, my PC did not want to boot from that stick. So I cleaned everything from the stick and just copied my backup onto it and used the make-boot.bat. That did work, my tower is ruing again. I had to got a new key for the stick.

I have a backup through the web frontend of unraid. What else should I backup to be on the safe side? That is the one I have ordered.

Hello, today I noticed that my USB stick seams to be failing. I have read some other threads regarding this error. I have already ordered some new USB sticks because the stick I am using rigth now (it is an Sandisk Ultra Fit, one of these tiny ones) is not recommended for unraid according to some entries here. Should I even try repairing (I would follow these instructions ) the stick or should I directly migrate to a new USB stick? I do not want to waste my "one new usb stick every 12 month" but the current stick just lasted 8 month. Is there a way to check if the stick is realy broken or if just something went wrong? Thanks for your help

I gonne let it do it`s job and tomorrow I`ll gonne play around with shinobi_pro and Unassigned Devices Thanks for your help

It started normal and is now doing a parity check (wich I did the day before yesterday). Thanks for your help. I am still somewhat new to unraid

Well I should have come up with that myself. Here it is tower-diagnostics-20200321-1522.zip

Thanks for your answer but now it is stuck in powering down for over 10min.

Hi, I downloaded and installed 6.8.3 and wanted to reboot the system because the update told me to and now the server is stuck while stopping the array. What should I do?