JustOverride

I'm sorry to hear that and I hope someone can help you out. My issue has completely stopped, and I have been lucky to not encounter any issues at all since my update to v6.8.0.

I was actually experiencing this issue as well. Happened twice to the point where I had to forcefully reset then computer as it was non-responsive. I updated to Version: 6.8.0-rc9 and so far the issue haven't came back. PS: My data is pointed to /user if anyone is wondering.

I'm on 6.8.0-rc8. I have dockers/VM's running without issues. I would also like to know if its OK for me to upgrade or to wait till what version? (edit) Thanks for above response

I was thinking the same but wasn't sure so I thought I would request/ask here. Thank you for confirming!

I can't wait to upgrade. Thanks for the update.

I was wondering if it would be possible to make users with no access to a private share to not give them visibility of it.

Thanks! Everything worked out. Is it still recommended to move the docker to the (/mnt/cache/docker.img) location? I wanted to leave it as default. I made a copy of the docker, then I disable the dockers, and then deleted the docker image. Then I just simply re-enable the dockers, went to the CA and re-downloaded my apps from the "Previous Apps" section on the left. Everything installed in a few seconds and it kept my ALL settings. Really have I didn't had to start from scratch. Ok, I just notice my Log file says its at 100% now. Where can I find/fix this? I think this has to do with the tautulli docker as it is not working and giving me a bunch of errors. I'll check it tomorrow I guess...

The docker is dropped, can't start it as I get this error. "Execution error Image can not be deleted, in use by other container(s)" I notice the log keeps repeating "e":"can not get logs from container which is dead or marked for removal"}". I think the system log file is getting full of this repeating. (check picture) When I go to tools to view the system log, I get this error: "Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 4096 bytes) in /usr/local/emhttp/plugins/dynamix/include/Syslog.php on line 20" I have stopped, shutdown/restarted the array, and tried again. Nothing.

It all started when I attempted to shut down the docker 'Pi-Hole' off for an upgrade. It did not shutdown so I forcefully shut it down. Now, it seems to be in a 'removal in progress' mode. The logs state the following: "e":"can not get logs from container which is dead or marked for removal"}" Telling it to remove it again gives me the following error: "Execution error Server error" Regardless of me selecting delete image or not. I have already create a new image of this docker and just need to fully remove whatever is left. How should I proceed?

Yea, same here. Extremely happy with Unraid, will be upgrading my license regardless.

I definitely partially agree with you. However, from a marketing point of view, I think it would also open the door to sales that otherwise won't happen and/or would happen but perhaps in course of a year or two. Then is a question of whether waiting that time was worth it to receive X that would of other wise been the discount offered to receive it now. IMO.

I would personally love to see a sale, at least just on upgrades.

Thanks for confirming, I didn't saw it was only for windows. I was getting ready to give up on it and try Nextcloud using the spaceinvader video.

Exactly, same here. All I'm missing is a FileZilla Server docker (which I haven't found, if anyone knows where I can find it let me know) or something similar, then I won't use the Windows VM either. I'm keeping the 16GB I have unless I come across a good deal on DDR3 memory (which I'd probably find with today's prices).

Just wanted to say I fixed it by changing bios settings. It works with UEFI and unraid GUI for me as well as having one of the GPU passthro for a VM.

Bios is up-to-date, I changed the boot to UEFI on the bios and the settings. The GUI for unraid is not coming up for me now. I can still access it throw the web, or if I use non-gui.

Thanks for the input. I have been booting it in non-UEFI because that's what was suggested. I have purchased my license, everything is working as needed. GPU is pass-thro my VM, I did ended up having to use an older GPU in the top slot for unraid. I will change it to UEFI, hope nothing breaks.

Certainly! I've uploaded the diagnostics file on my first post.

Sorry, I figured it out (of course after posting the thread). Thank you! I have corrected this issue. On top of it the SSD wasn't mounted (duh) just flew right over my head. @itimpi You're right, everything was running/installing on the ram (no wonder why it was going super fast till it just crashed). Windows seems have installed successfully and is now setting up!

Hello, I'm trying to setup a VM which will be running from an unassigned device (SSD). However, when I go make the VM, it keeps stopping at 56ish%. Then I notice the VM is paused with the message "Execution Error cannot write data to file '/var/run/libvirt/qemu/....': No space left on device". Then unraid starts to show errors everywhere. The RAM appears to be near full (at around 80%) so I don't think its writting to the SSD. Settings shown below.

UNRAID found some errors via the SMART reporting. One of them is from an SSD (currently on unassigned device) as shown below: The second is my array first disk HDD. Are these errors I can expect to find that the HDD auto corrects and everything is fine or is it something serious and I should look into replacing them? I'm sorry, I'm not sure what to look for in the S.M.A.R.T. data from the drives.

Hey! I just started using unraid myself as of 3 days ago. I can tell you everything has been working great with no hassle. The guides/youtube videos you may find (as I did) are a bit outdated and setting up unraid is way easier. The best thing I can say is just go ahead and set it up to try it. I just installed Plex as of this morning and everything was very easy and straight forward. I'm still on my trial but I'm 99% sure I'll be purchasing this. I hope this information helped.

Yes! I've been almost benching the videos of SpaceInvaderOne, I'm surprise he isn't hired/sponsored here honestly. I also found some guides from here to be kinda out of dated, but I love the community support and assistance. I already own the system above so I'm kinda stuck with it, and yes I've actually watched the videos you referred me to. Since its a chance, I just ordered a EVGA GT 710 2GB (just in case it doesn't work with one card) to place it in the first slot for unraid (only cost me 25$ used on ebay). Then use the EVGA 1030 on the other x16 slot. I'm just been reading and learning everything about unraid before starting. I should have some free time to start tonight. (Edit) I was able to install it and have HVM and IOMMU enabled! I now need to upgrade the CPU with the i7-4930K I purchased. Quick question, I want to run one main VM on unraid (which will be mostly on 24/7), and use as much power as possible without really starving unraid which would be like, plex, data, backup. 1. Should I have to leave like 4GB of ram, and 2 cores unused for unraid? 2. What are your suggestions? 3. What would happen if I use all available resources for a VM, does unraid/app/dockers still uses whatever it needs run well?

I'm actually resurrecting this threat as well. I would like to know what would be the best settings for my use scenario. Anyone care to comment? I was unable to find it as well.

Thank you guys for answering my questions, I will go ahead and purchased it once the system is put together!