no access to the webui after the first reboot of the system

[Luca M]

Hi,

I created a unraid usb stick, booted from it and then selected the trial license in webui. Then I restarted the system. From this point I no longer get a connection to the WebUi, but I can ping the server on the local network, the ping is sometimes successful sometimes not. (as ipv4 address unraid shows me after reboot a completely different ip not matching to the netmask)

I have tried this several times, always with the same result: no more connection to the WebUi.

Thanks a lot

[Luca M]

In the logfile there is an error: emhttpd: error: get_limetech_time, 256: Connection timed out (110): -2 (7)

I did not find any thing helpful in the internet

I hope you can help me.

thank you in advance.

[trurl]

1 hour ago, Luca M said:

ipv4 address unraid shows me after reboot a completely different ip not matching to the netmask)

If this is 169.... IP then it has connection problem to your router. 

[Luca M]

the "normal" ip is 192.168.178.xx

but after reboot: 169.254.27.xx

yes, it´s a 169.

But I have tested the lan cable with another computer (windows), with which everything worked normally.

And when I create a new usb stick and boot the first time, the webui works and the right ipv4 is displayed.

Thank you in advance

[Luca M]

I just tested it again with another lan cable, now it seems to work.

Thanks a lot!

[Luca M]

Unfortunately, the cable was apparently not the solution.

Now I have the same problem as before.

The system was running, I rebooted, now it is no longer accessible via the webui. (via ping in the local network still reachable)

[JorgeB]

Type "diagnostics" in the console or use the local GUI to get them and post them here.

[Luca M]

When running it i got a new error message: warning: no space left.
But on my usb stick as well as on my array and chache is actually still much space free.

tower-diagnostics-20210527-0010.zip

Now the correct ipv4 is displayed, but I still have no access to the webui.

tower-diagnostics-20210527-0052.zip

Edited May 27, 2021 by Luca M

[Luca M]

This is a picture from after the boot:

 

[JorgeB]

Looks like a flash drive problem, it's not booting correctly, try re-creating it or using a different one.

 

 

[Luca M]

I created a new unraid usb stick, started the server the first time with that usb stick. It worked. I started the array and installed nvidia driver. Rebooted.

And now a cannot access the webui again.

[JorgeB]

Best to post in the nvidia plugin support thread:

 

[ich777]

1 hour ago, Luca M said:

This is a picture from after the boot

May I ask how much system memory you have installed?

[itimpi]

1 hour ago, JorgeB said:

Best to post in the nvidia plugin support thread:

 

You might want to try the ‘df’ command to see if the USB drive is correctly showing as mounted at /boot?