mikeyosm Posted October 29, 2021 Share Posted October 29, 2021 (edited) Hi Running 6.9.2 and connected my Corsair Commander Pro to a USB port to see if I can get fan control working under UNRAID/Linux. According to the following articles https://blog.ktz.me/a-usb-fan-controller-that-now-works-under-linux/ https://www.phoronix.com/scan.php?page=news_item&px=Corsair-Commander-Pro-Linux-5.9 the CPro should be detected under Linux kernel 5.9+ but unfortunately it's not being detected in UNRAID. Running sensors-detect does not list the commander pro at all so not sure if the driver is loaded or indeed even added to the kernel. The Commander Pro is available for passthrough to a VM and shows up in my USB list so it's defo working OK. Is there any way I can check if the driver named (corsair-cpro) is available in 6.9.2 UNRAID kernel and if not is it available in 6.10 RC1? Thank you for your help. EDIT: lspro shows the driver exists but is not in use. corsair_cpro 16384 0 Edited October 29, 2021 by mikeyosm Quote Link to comment
KnottySean Posted November 15, 2021 Share Posted November 15, 2021 Did you get this figured out? I too would like to get this working fully. I have been running a windows 10 vm to handle the fans/AIO, it would be great to not have to. Quote Link to comment
mikeyosm Posted November 16, 2021 Author Share Posted November 16, 2021 18 hours ago, KnottySean said: Did you get this figured out? I too would like to get this working fully. I have been running a windows 10 vm to handle the fans/AIO, it would be great to not have to. 18 hours ago, KnottySean said: Did you get this figured out? I too would like to get this working fully. I have been running a windows 10 vm to handle the fans/AIO, it would be great to not have to. So it turns out that the fans are visible to UNRAID/Linux and appear in the UNRAID dashboard. I haven't installed the dynamix fan control plugin as I dont need to control the speed of the fans. The trick is to not tick the fans in the dynamix sys temp settings, that's when things get messy. Quote Link to comment
TIE Fighter Posted November 19, 2021 Share Posted November 19, 2021 +1 i am in the same situation. my gigabyte X570 AORUS master is lacking support for the fan and temp sensors in unraid and I am looking for a solution to control them in the unraid ui. Can you try and see if you can control them with the plugin and report back? Quote Link to comment
KnottySean Posted November 25, 2021 Share Posted November 25, 2021 So, in the Dynamix Fan Auto Control plugin lists the fans attached to the CCP. When I select one, and hit Detect on the PWM Fan entry, it returns the following: <br /><b>Warning</b>: file_get_contents(/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.3/usb3/3-2/3-2:1.0/0003:1B1C:0C10.0001/hwmon/hwmon2/pwm2_enable): failed to open stream: No such file or directory in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>40</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.3/usb3/3-2/3-2:1.0/0003:1B1C:0C10.0001/hwmon/hwmon2/pwm2_enable): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>42</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.3/usb3/3-2/3-2:1.0/0003:1B1C:0C10.0001/hwmon/hwmon2/pwm2_enable): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>50</b><br />/sys/devices/platform/nct6775.656/hwmon/hwmon4/fan6_input Quote Link to comment
trurl Posted November 25, 2021 Share Posted November 25, 2021 17 minutes ago, KnottySean said: failed to open stream: No such file or directory in <b>/usr/local/emhttp/ Seems like a possible flash drive problem. Attach diagnostics to your NEXT post in this thread. Quote Link to comment
KnottySean Posted November 25, 2021 Share Posted November 25, 2021 I just replaced my flash drive last week, my last one decided it only wanted to mount read-only. Here are the diags. juggernaut-diagnostics-20211124-1918.zip Quote Link to comment
trurl Posted November 25, 2021 Share Posted November 25, 2021 Nov 24 09:43:41 Juggernaut emhttpd: unclean shutdown detected Is that expected? If not that could also indicate a flash problem. Are you booting from USB2 port? Quote Link to comment
KnottySean Posted November 25, 2021 Share Posted November 25, 2021 I had an issue with my quad-port nic in my host this morning after a restart command, and had to power off the host. My Asrock X570M Pro4 doesn't have any USB 2.0 ports in the rear. I've been running it on a USB 3.0 port since I built it last Jan2020. Quote Link to comment
JonathanM Posted November 25, 2021 Share Posted November 25, 2021 12 minutes ago, KnottySean said: My Asrock X570M Pro4 doesn't have any USB 2.0 ports in the rear. Quote Link to comment
MrMaus Posted July 29, 2022 Share Posted July 29, 2022 did anyone else have luck? Quote Link to comment
trurl Posted July 29, 2022 Share Posted July 29, 2022 1 hour ago, MrMaus said: did anyone else have luck? Not at all clear what you are asking about. This is an old thread, mostly about flash drive problems, one of many threads about that topic. Why did you post to this one? What is your specific problem? Quote Link to comment
TheDirtyR Posted February 28 Share Posted February 28 (edited) I have the corsair working.. and I have a sensor plugged in. I would like to add the ability to show the Corsair sensors on the Main page of UnRaid but haven't found a way to do it. I have placed one prob on the LSI heatsink and I'll be putting another on my tv tuner heatsink to monitor them. I can shell and run sensors. orsaircpro-hid-3-2 Adapter: HID adapter in0: 11.89 V in1: 4.92 V in2: 3.38 V fan1 4pin: 1586 RPM fan2 4pin: 1625 RPM fan3 4pin: 1562 RPM fan4 3pin: 1863 RPM temp1: +40.8°C FAN 4 3pin is the PCI fan slot cooler pointed at the LSI card. Temp1 is a temp sensor pressed inside the fins of the LSI card. Edited March 10 by TheDirtyR Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.