Indi Posted November 6, 2021 Share Posted November 6, 2021 (edited) I am new to unRAID, thought it would be something to help simplify things and would be a better overall experience than Windows Server 2019. I spent the last week tireless learning about unRAID and decided to give it a go. After testing it, I spent 18 hours moving my data to a temporary array so that I can build an array in unRAID. After that finished, I just spend the last 3 days moving things over through TeraCopy because unRAID doesn't recognize ReFS. After getting through most all the issues I encountered, I spent the last 8 hours today configuring my docker containers for Sonarr, Radarr, SabNZBD and Lidarr. When I was all finished, everything was working great. All the sudden, out of nowhere I lose connection to the Web GUI of my server, assigned to a static IP of 192.168.1.100 I don't have an iGPU, so I can't boot into the GUI mode (I have a dedicated RX 480). I just get a blinking cursor on the upper right, so no way to see what's wrong. If I boot into either mode (OS or OS Gui) it gives the line of code and *seems* to be fine. It gets to the end and shows my static IP. Though I can't connect to it on any computer, pinging it also fails. I ran "diagnostics" and it loaded a zip file, but I don't even know how to access it (the USB drive doesn't seem to be recognized on my Win 10 machine, I am going to reboot to see if that helps). *Update* I rebooted, but I can't access the drive in explorer, the drive is shown in Disk Management as healthy however. I feel like my sleepless nights and effort has gone out the window, I don't understand why out of the blue I would lose connection. I do have a backup, though not even sure if that's what I should try first. I've heard good things about this community so I am hoping someone might have ideas on what's wrong here. Edited November 6, 2021 by Indi Updating status Quote Link to comment
trurl Posted November 6, 2021 Share Posted November 6, 2021 3 minutes ago, Indi said: the USB drive doesn't seem to be recognized on my Win 10 machine The Unraid boot flash is FAT32, so Windows should be able to read it. If Windows can't you won't be able to boot from it. The config folder from flash (or flash backup) is all that is needed to get your configuration back on a new install. After you get the flash drive prepared again, boot from a USB2 port, USB2 port is more reliable for the Unraid boot flash. Quote Link to comment
Indi Posted November 6, 2021 Author Share Posted November 6, 2021 1 minute ago, trurl said: The Unraid boot flash is FAT32, so Windows should be able to read it. If Windows can't you won't be able to boot from it. The config folder from flash (or flash backup) is all that is needed to get your configuration back on a new install. After you get the flash drive prepared again, boot from a USB2 port, USB2 port is more reliable for the Unraid boot flash. So I can see the USB in Disk Management, though in File Explorer it's not an option. I put the USB in another machine and I can see it/open it there. Anything I should check within the config folder before attempting an install on a new drive? One thing I would like to ask, this drive is 32GB which I know unRAID states the drive must be a maximum of 32GB. Is there any real issue if I use a 64GB drive? Quote Link to comment
trurl Posted November 6, 2021 Share Posted November 6, 2021 2 minutes ago, Indi said: attempting an install on a new drive? Better if you can use the same drive if there is nothing wrong with it. Quote Link to comment
Indi Posted November 6, 2021 Author Share Posted November 6, 2021 I have the log files from the USB drive, hoping this helps archive(1).zip Quote Link to comment
trurl Posted November 6, 2021 Share Posted November 6, 2021 Since you have a trial license your server must be able to validate that license by connecting to limetech over the internet. Nov 6 15:22:47 OuterHaven emhttpd: error: get_limetech_time, 256: Connection timed out (110): -2 (7) Nov 6 15:22:47 OuterHaven emhttpd: Unregistered Trial - no connection (ENOCONN) Looks like a networking problem. Quote Link to comment
Indi Posted November 6, 2021 Author Share Posted November 6, 2021 That would make sense since my issue is that I can't connect to the WebGUI of unRaid. Quote Link to comment
Squid Posted November 6, 2021 Share Posted November 6, 2021 @ljm42 See above. Technically this shouldn't result in no connection to the GUI, even though the server has a valid IP Quote Link to comment
Indi Posted November 6, 2021 Author Share Posted November 6, 2021 I am not really sure where to go from here. How can I get in to pay for a license if unRAID is refusing a connection? Is my only option to completely start over from scratch on a new USB? Quote Link to comment
Squid Posted November 6, 2021 Share Posted November 6, 2021 1 minute ago, Indi said: I am not really sure where to go from here. How can I get in to pay for a license if unRAID is refusing a connection? Wait for @SpencerJ or @ljm42 to pipe in here. Quote Link to comment
ljm42 Posted November 7, 2021 Share Posted November 7, 2021 I'd agree it looks like a networking problem, can you double check your cabling? Can you ping the server from another computer? If you sign in to the console, can you ping something else from the server? Also, what happens if you type: /etc/rc.d/rc.nginx start Quote Link to comment
Indi Posted November 7, 2021 Author Share Posted November 7, 2021 4 minutes ago, ljm42 said: I'd agree it looks like a networking problem, can you double check your cabling? Can you ping the server from another computer? If you sign in to the console, can you ping something else from the server? Also, what happens if you type: /etc/rc.d/rc.nginx start I ran the command you've provided and it stated that Nginx is already running. I tried to ping my gateway and it says it's unreachable, so I tried a new network cable and I still can't ping to or from the machine. The motherboard has two NICs, I tried connecting each (and both at the same time). I have a PCI NIC I can install and try, if it's still believed that it's a network issue related to hardware or cabling. I've tried connecting the server to my switch, as well as my gateway but nothing changes. I've even tried using different USB ports for the thumb drive, I copied the files from my original thumb drive to a new one and the issue persisted. I've been working at this all day and not sure what else to try. It's weird that everything was working, then all the sudden just stopped (I wasn't making any changes when the connection was lost). I also did a reboot on my router/switch. I was just starting to get to the fun stuff in unRAID Quote Link to comment
Squid Posted November 7, 2021 Share Posted November 7, 2021 Try this: rm /boot/config/network.cfg powerdown -r This will reset the network completely. It doesn't however make a lot of sense that you can't hit the GUI via localhost though. Quote Link to comment
Squid Posted November 7, 2021 Share Posted November 7, 2021 And do rm /boot/config/network-rules.cfg Quote Link to comment
trurl Posted November 7, 2021 Share Posted November 7, 2021 Note that without network.cfg your server will be using DHCP and will get whatever IP address your router gives it. I prefer things that way myself, and configure my router to reserve a static IP by MAC address for my server and anything else I want to have a static IP on my network. That way everything is managed in the one place that really matters, in the router, and everything on my network can just use the default DHCP. Quote Link to comment
ljm42 Posted November 7, 2021 Share Posted November 7, 2021 9 minutes ago, Squid said: It doesn't however make a lot of sense that you can't hit the GUI via localhost though. I didn't see where that was mentioned? Quote Link to comment
Indi Posted November 7, 2021 Author Share Posted November 7, 2021 I may have found a potential cause. I just got this motherboard as part of my first unRAID build. It has two ethernet ports, One 10G Lan and one 2.5G Lan. I noticed when I connect it to my switch, the port for the 10G LAN isn't lit up, when I connect the 2.5G LAN it does. Perhaps that port may have failed me after just a day of use? If I configured unRAID to use that port, how can I tell it to instead use the other LAN? It doesn't seem to detect that automatically as a failover. Would I change my config file to be eth1 instead of eth0? Quote Link to comment
Squid Posted November 7, 2021 Share Posted November 7, 2021 15 minutes ago, ljm42 said: I didn't see where that was mentioned? Either a figment of my imagination or I was just testing you 1 Quote Link to comment
Indi Posted November 7, 2021 Author Share Posted November 7, 2021 I installed a new PCI NIC after following the instructions from @Squid, with that new NIC I can access the Web GUI! It seems that both NICs on this motherboard failed together, crazy. I am just so happy/relieved to see that unRAID gui...thanks everyone for helping me with this! 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.